台林電通股份有限公司

1.工業級 Ethernet Switch 系列產品軟體開發（1G/10G/25G）。 2.負責嵌入式系統架構規劃（U-Boot、Linux Kernel、Driver Layer）。 3.協同硬體、測試與 PM 團隊，整合 SoC（含 PHY、PoE、CPU）並優化效能。 4.撰寫並維護軟體架構與模組（如 VLAN, QoS, PTP, TSN, L2/L3 stack）。 5.具備解決問題能力與良好溝通能力，協助指導工程師並推動專案進度。 1.Develop software for industrial-grade Ethernet Switch products (1G/10G/25G). 2.Responsible for planning and maintaining embedded system architecture, including U-Boot, Linux Kernel, and driver layers. 3.Collaborate with hardware, QA, and project management teams to integrate SoC features (including PHY, PoE, and CPU) and optimize system performance. 4.Design, implement, and maintain key software modules such as VLAN, QoS, PTP, TSN, and L2/L3 protocol stacks. 5.Demonstrate strong problem-solving and communication skills; provide technical guidance to junior engineers and help drive project progress.

1.SMT產線PCBA目視、檢查、維修。

1.產品機構設計，3D/2D 圖面繪製及 BOM 建立。 2.產品機構設計、原型製作、模具開發及 DFM 檢討。 3.試模、試作及試產問題分析與改善。 4.零件承認相關事宜。 1.Product mechanical design, 3D/2D drawing creation, and Bill of Materials (BOM) generation. 2.Product mechanical design, prototyping, mold development, and DFM review. 3.Analysis and improvement of issues during mold trials, prototyping, and trial production. 4.Part approval related matters.

1.RFQ 測試報價分析與規劃。 2. NPI 產品試產/量產前準備工作規劃與執行，確保測試覆蓋率，技術轉移。 3. 分析測試問題、提出改善建議與客戶對應。 4. 跨部門合作與溝通(開發、製造及品保…等)，確保測試品質。 5. 彙整測試紀錄、報告彙整、測試流程撰寫。 6. 主管交辦事項。 1. RFQ test-quotation analysis and planning. 2. Planning and execution of NPI trial run and mass production test preparations, ensuring test coverage and technology transfer. 3. Analyze test issues, propose improvement suggestions, and communicate with customers. 4. Cross-functional collaboration and communication (R&D, Manufacturing, Quality, etc.) to ensure test quality. 5. Compile test records, summarize reports, and write test procedures. 6. Perform tasks assigned by supervisors.

1.新產品品質驗證與客戶溝通：負責新產品在 NPI/NPD 階段的品質驗證作業，包括檢驗確認、可靠度測試與報告撰寫。 2.處理 DOA、RMA 與客訴問題，進行根本原因分析並執行矯正與預防對策（CAPA）。 3.擔任客戶稽核主要聯絡人，負責品質異常溝通與改善措施的推動。 4.撰寫並提交完整的 8D 報告，系統性處理品質問題。 5.管理品質目標，透過製程與產品數據分析辨識風險並制定有效的控制計畫。 6.建立與維護產品外觀與尺寸檢驗標準，確保品質一致性與符合法規要求。 1.Led quality validation activities for new products during NPI/NPD phases, including inspection confirmation, reliability testing, and report documentation. 2.Investigated and resolved DOA, RMA, and customer complaint issues through root cause analysis and implementation of corrective and preventive actions (CAPA). 3.Served as the primary liaison for customer audits, handling quality-related communications and coordinating improvement initiatives. 4.Prepared detailed 8D reports to address and document quality issues and corrective measures. 5.Monitored quality objectives by analyzing process and product data, identifying risks, and developing appropriate control strategies. 6.Developed and maintained inspection standards for both visual appearance and dimensional accuracy to ensure product consistency and regulatory compliance.

負責DIP製程的插件、修補焊作業

1. 新產品BOM審查，制訂標準化製造工序(SOP)，評估作業時間。 2. 組裝治工具規劃，生產技術轉移至工廠。 3. 產品試產/量產前準備工作，工程不良問題分析，及製程改善對策執行。 4. 具Rack組裝工作經驗, 熟悉金屬加工製程，及使用 SolidWorks 繪圖軟體佳。 5. 其他主管交辦之事項。 1. Review BOM (New products), establish standardized manufacturing procedures (SOP), and evaluate operation time. 2. Plan assembly jigs and fixtures, and transfer production technology to the factory. 3. Prepare for trial/mass production, analyze engineering issues, and implement process improvement actions, and communicate with customers. 4. Experienced in rack assembly, familiar with metal fabrication processes, and proficient in using SolidWorks CAD software is a plus. 5. Perform other tasks assigned by supervisors.

1. 帶領半導體維修團隊，完成公司目標 2. 建置半導體維修用測試自動化機台能力 3. 測試及維修團隊管理 4. 熟悉測試軟體硬體開發、維護、改善 5. 熟Labview 或PLC 開發經驗尤佳 6. 具備英文聽說讀寫能力, 能以英語與外國人溝通工程問題 1. Lead a semiconductor repair team to achieve the company's objectives 2. Develop an automatic tester for product repair 3. Manage the testing and repair team 4. Be proficient in testing software and hardware development, maintenance, and improvement 5. Have experience with LabVIEW or PLC development 6. Possess English listening and reading skills, and be capable of communicating engineering issues with customers in English

1. 製作維修用測試自動化機台 2. 電子產品故障排除 3.設計製作測試治具，開發測試軟硬體 4.測試問題分析及除錯，電路分析 5.其他主管交辦事項 1. Develop automated tester for repairing and testing 2. Troubleshoot electronic products 3. Design and manufacture test fixtures, software or hardware 4. Analyze test problems and circuit diagrams 5. Handle other tasks assigned by supervisors

1. 技轉專案規劃、執行、掌控、風險管理與追蹤。 2. 跨部門溝通、協調與整合，維修工程與客戶之間的橋梁。 3. 整合專案工程議題與管理，並定期與客戶進行回報，與進度狀況。 4. 維修用物料的掌控。 5. 主管交辦事項。 1. Planning, execution, control, risk management and tracking of tester transfer projects. 2 Cross-departmental communication, coordination and integration, repairing the bridge between the project and the customer. 3. Integrate project engineering issues and management, and regularly report to customers and progress status. 4. Control of maintenance materials. 5. Tasks assigned by the supervisor.

1.負責 QC 退貨案件的追蹤、改善與稽核作業。 2.針對客訴案件進行改善對策成效稽核。 3.執行 IPQC 製程巡檢稽核，包括 ESD 靜電阻抗量測稽核，並撰寫稽核缺失報告、週報與月報。 4.進行半導體產線駐線稽核，確保製程品質符合標準。 5.執行投鼠實驗，進行品質風險評估。 6.協助產品外觀與功能測試的檢驗工作。 7.完成主管交辦的其他事項。 1.Managed and track quality reject cases, implement corrective actions follow-up audits. 2.Audited the effectiveness of Corrective and Preventive Actions (CAPA) for addressing customer complaint issues. 3.Performed in-process quality control (IPQC) audits, including ESD verification, and compile audit findings/reports on a weekly or monthly basis. 4.Conducted on-site quality audits at semiconductor manufacturing lines to ensure compliance with internal standards and customer requirements. 5.Executed “Faulity Test” experiments to assess potential quality risks and propose preventive measures. 6.Assisted in product inspection activities, including visual appearance checks and functional testing. 7.Completed other quality control tasks and assignments as delegated by the supervisor.

SMT設備操作。

1.協助工業級 Ethernet Switch 軟體模組開發與測試（1G/10G/25G）。 2.撰寫及除錯嵌入式系統軟體（U-Boot、Linux Kernel）。 3.學習並參與 SoC 整合（如 PHY、PoE、外接 CPU）。 4.支援通訊介面（I2C、SPI、UART 等）與基本驅動程式開發。 5.在資深工程師指導下進行系統測試與除錯。 1.Assist in the development and testing of industrial-grade Ethernet Switch software modules (1G/10G/25G). 2.Write and debug embedded system software, including U-Boot and Linux Kernel. 3.Learn and participate in SoC integration, such as PHY, PoE, and external CPUs. 4.Support communication interface development (I2C, SPI, UART, etc.) and basic driver implementation. 5.Conduct system testing and debugging under the guidance of senior engineers.

1.依公司營運策略進行業務發展計劃與達成業績目標。 2.客戶拜訪開發 & 依客戶需求做報價作業。 3.負責產品專案管理，並協助解決料況及客戶相關問題。 4.針對交期、價格、品質等相關問題，做客戶與廠內間之溝通協調窗口。 5.依據銷售合約規範，定期檢討庫存。

1.外包廠生產檢驗/品質管理/稽核 2.品質異常單追蹤改善 3.客戶至台林外驗接待驗貨 4. 2.5D量測程式編輯 5.相關品質資料統計分析 6.協助產品外觀/測試檢驗 7.主管交辦事項 1.Conducted in-process and final inspections at outsourced manufacturing sites, ensuring compliance with quality standards and specifications. 2.Managed quality non-conformance reports (NCRs), tracked root causes, and implemented corrective and preventive actions (CAPA). 3.Coordinated and supported customer product inspections conducted at Tailyn, serving as the main contact window. 4.Developed and edited 2.5D measurement programs to support dimensional measurement. 5.Performed statistical analysis on quality data to monitor trends and drive quality improvements. 6.Assisted in the inspection of product appearance and functionality to ensure conformance with quality requirements. 7.Executed additional quality control tasks and special assignments as requested by the supervisor.

1.依公司策略推動工控產品業務與專案，達成業績目標，並負責EMS客戶維護與訂單處理。 2.客戶拜訪開發 & 依客戶需求做報價作業。 3.負責產品專案管理，並協助解決料況及客戶相關問題。 4.針對交期、價格、品質等相關問題，做客戶與廠內間之溝通協調窗口。 5.依據銷售合約規範，定期檢討庫存。 1. Driving industrial product business and projects according to company strategy to achieve sales targets, and manage EMS client relationships and order processing. 2. Customer visits, developing and quotation preparation based on customer requirements. 3. Responsible for product project management and assisting in resolving material issues and customer-related problems. 4. Serving as the communication and coordination window between customers and the factory regarding issues such as delivery schedules, pricing, and quality. 5. Regularly review inventory in accordance with contract specifications.

1. SOP製作 2. NPI試作與DFM/PFMEA提供 3. 生產治工具設計確認 4. 生產線異常處理 5. 標準工時設定/LINE BALANCE 6. 製程優化及改善 1. SOP Production 2. NPI trial production and DFM/PFMEA provision 3. Production tool design confirmation 4. Production line abnormality handling 5. Standard working hours setting/LINE BALANCE 6. Process optimization and improvement

1. 負責硬體設計部門日常作業與技術支援，協助電路設計驗證與功能測試。 2. 參與產品導入與開發流程，提升設計品質與效能。 3. 透過文件學習與實務操作，累積Ethernet Switch設計經驗。 4. 配合專案執行，逐步建立硬體電路設計與問題解決能力。 1. Responsible for day-to-day operations and technical support within the hardware design department, assisting with circuit design verification and functional testing. 2. Participated in product introduction and development processes to enhance design quality and performance. 3. Gained hands-on experience in Ethernet Switch design through documentation review and practical implementation. 4. Developed hardware circuit design and troubleshooting skills progressively through project-based execution.

1. 負責Network Processor相關硬體設計。 2. 執行1G / 10G / 25G Ethernet Switch等網通設備之硬體設計與開發。 3. 與跨部門團隊合作，負責設計開發、量測驗證、產品認證及問題協調與解決。 1. Responsible for hardware design of Network Processor–based platforms. 2. Designed and developed networking hardware including 1G / 10G / 25G Ethernet Switches. 3. Collaborated with cross-functional teams on system design, hardware verification, product certification, and issue resolution throughout the development cycle.

1. 分析技術圖面完成產品組裝/測試/包裝。 2. 動手能力強，能配合加班，具有良好的團隊精神和較強的協調能力。 3. 功能測試和性能檢測設備應用，例如三用電表。 4. 熟悉2D/3D設計圖，熟悉組裝工藝，能獨立作業。 5. 協調與溝通：與其他作業員協調，確保生產線順利運作。 6. 主管交辦事項：完成主管交辦的其他工作。