「Process Engineer (新竹)」的相似工作

The Installation Engineer job is high profile and exciting opportunity for adventurous souls! Works under minimal direction from Management. Completes documented procedures and exercises judgment within defined procedures. Recommends changes to existing process and procedures. Primary responsibility is to strive for predictable Cycle Times and Warranty Starts for new tools installed and upgraded at our customer sites. Includes activities associated with setup, alignment, calibration, troubleshooting, diagnosing, and repairing of highly sophisticated capital equipment. Represents the company to the customer and assumes accountability for customer satisfaction with all installation/upgrade-associated activities. Assures operational quality of system equipment. Works directly with KLA regions and customers to verify new tool performance and transfer tool responsibility. Seeks warranty sign-off on newly installed tools Roles and Responsibilities • Installation of new tools in the field. Follows all procedures and provides a consistent result within specified cycle times. Achieves a predictable warranty start. • Evaluates, analyzes, diagnoses and fixes technical equipment problems related to installation. Can repair issues using standard procedures or innovate to resolve system problems which can have multiple causes. • Solving problems and repairs of sophisticated system level problems are based on Installation Engineer's technical knowledge and training. Installation Engineers seek help from Staff Engineers and Management when problems occur that may exceed knowledge, education and training. • Prepares field service reports and daily passdown on Installation progress and non-conformances. Contributes to post-activity Quality Feedback Report • Hold pre-installation meetings with the customer to scope customer unique requirements then create plans of action to measure and satisfy the unique needs. Execute plans of action and validate deliverables with the customer. • Meet with customer to facilitate warranty signoff after the activity is complete. • Acquires all vital international travel documents and manages their personal lives to be ready for domestic and occasional international travel. • Handles personal finances to prevent disruption to scheduled activities - even when traveling for extended periods. • Travels domestically and internationally by commercial transportation to customer sites. • Assists other engineers as necessary. Provides mentorship and technical assistance at customer sites. Can develop basic POAs. Provides phone and on-site support for junior engineers *Note: Only applications with *English resume* will be considered. *Please also apply through KLA Career page: https://careers.kla.com/

We are seeking a customer-focused, technically adept, and relationship-driven Customer Engagement Application Engineer to join our global team supporting KLA’s industry-leading wafer inspection and metrology solutions. In this front-line, customer-facing role, you will be the trusted technical advisor and strategic partner to our customers, driving product adoption, solving complex challenges, and building long-term relationships that fuel success. You will collaborate across functions to deliver high-impact solutions in the dynamic world of semiconductor manufacturing. Key Responsibilities: • Serve as the primary technical interface between KLA and customer, building trust and credibility through consistent, high-quality support. • Deliver applications support for KLA’s wafer inspection and metrology tools at customer fabrication facilities. • Lead customer engagements including product evaluations, new tool introductions, and drive competitions. • Drive customer success by conducting acceptance tests, recipe development, hands-on training, and pre-sales technical enablement. • Cultivate strong customer relationships by understanding their technical needs, aligning solutions, and ensuring satisfaction through onsite support . • Collaborate with customers and internal teams to co-author technical papers and present at global industry symposiums. • Develop and share Best Known Methods (BKMs), SOP ( Standard Operating Procedures ) materials, and technical documentation to empower global Field Applications teams. • Act as a cross-functional bridge, aligning customer feedback with engineering, sales, and marketing to drive continuous improvement. • Analyze complex technical issues, apply statistical methods, and deliver innovative, data-driven solutions. • Report regional insights and escalate field issues to product divisions, ensuring timely resolution and product evolution. Qualifications: • Master’s degree in Physics, Optics, Engineering, Material Science, or a related field; semiconductor process knowledge is a strong plus. • Proven experience in customer-facing technical roles, with a strong track record of building and maintaining customer relationships. • Demonstrated success in technical problem-solving, project execution, and cross-functional collaboration. • Willingness to work in semiconductor cleanroom environments. • Strong project management, leadership, and organizational skills. • Excellent presentation, communication, and interpersonal abilities. • Fluent in English, with the ability to communicate clearly via email, video calls, and in-person meetings. • Ability to manage multiple priorities in a fast-paced, global environment. Key Competencies: • Strong customer orientation with a passion for delivering value and building trust. • Advanced analytical and statistical thinking for data-driven decision-making. • Effective collaboration and communication across diverse teams and cultures. • High level of initiative, ownership, and accountability in driving results. • Resilience and adaptability in dynamic, high-pressure environments. • A proactive team player with a growth mindset and a drive for excellence.

KLA美商科磊致力於維護身心障礙者就業權益，歡迎領有身心障礙手冊或證明的夥伴投遞履歷，加入KLA！ The future is ours to create. Whether it’s a driverless car, VR experience, or factory robotics, we help turn theory into possibility. We help create technological devices and ideas that transform our future and shape our current life. We’re looking for Customer Service Engineers who contributes the support and provide unique customer value in the global electronics ecosystem. You will be able to learn the advanced mechatronic engineering and collaborate with leading customers across the globe, our expert teams of physicists, engineers, and problem-solvers design solutions that move the world forward. Roles and Responsibilities • Evaluates, analyzes, diagnoses and troubleshoots technical equipment problems via telephone or at customer site. Ensures equipment improves customer production. • Repairs of system level problems (which have multiple causes and for which no standard procedures exist) at customer sites. • Represents the company to the customer and assume accountability for customer happiness with service. • Assures operational quality of system equipment. Coordinates actions with customers to minimize down time. • Provides assistance to Installation Engineer in resolving problems. • Prepares fields service reports on customer support activity and provide documentation to other supporting functions on re-occurring problems. • Build positive relationship with customers and increase customer satisfaction by resolving sophisticated requests and issues. • Contribute to the Capturing, Re-use, Collaboration, and Improvement of knowledge using available systems • Develops and handles return materials authorization (RMA) processes for ensuring customer returns, exchanges, service and repairs are done with speed and accuracy and all client/customer service delivery issues are resolved. • Executes technical critical issues with detailed problem statement and pass-down to work with system engineering technical team in customer site. • Estimated travel is 20% once trained in the classroom as part of on-the-job training program. Although, much of the job responsibilities will be performed in the office or at the customer site supporting various projects and initiatives. In addition to problem diagnosis and resolution, other support duties will include characterization and support of customer demos and field projects. *Please visit and apply on our career website: https://kla.wd1.myworkdayjobs.com/zh-TW/Taiwan/job/Hsinchu-Taiwan/Customer-Service-Engineer-Hsinchu_2102329

透過ASM官網投遞此職缺，將優先安排履歷審核 【English resume is required】 Please apply for this position ONLY through ASM website : https://www.asm.com/open-vacancies/snr-field-service-engineer-2?gh_jid=4592238101 ASM is recruiting for multiple FRESH GRADUATE headcount of Field Service Engineers in our ALD/EPI/PEALD/CVD business function across Taiwan include Hsinchu, Tainan and Kaohsiung. As an Field Service Engineer at ASM, you’ll have the opportunities to get involved in a wider scope of work compared to our larger competitors. While the workload is challenging, you are given the independence and autonomy to perform at your peak. This work requires thinking “outside of the box” in an innovative manner, so you must have the ability to collaborate with others to deliver creative solutions, work well under pressure and pay great attention to small details. Responsibilities: • Maintain tool uptime and ensure excellent execution of installation and support of hardware issues. • Develop, maintain, and ensure the relevance of technical information used by internal and external stakeholders. • Understand and build long-term innovative global technology systems that enable enhanced customer relationships. • Ensure communication vehicles, e.g. telephone, email, and presentation, etc. are able to facilitate efficient and consistent customer follow-up. • Drive continuous improvement of the customer experience through team, hardware, software, and support tool development. • Drive and manage new product installs and subsequent hardware development. • Projects manage new evaluations and ensure the success of the project. • Additional assigned tasks when necessary. • Business travel when necessary. • Provide end-users with training on equipment operation, best practices, and preventive maintenance to ensure proper and efficient use. • Adhere to safety guidelines and industry standards while working on-site, ensuring all activities are compliant with company and regulatory requirements. • Collect and communicate field data, customer feedback, and equipment performance insights to internal teams for continuous product and service improvement. ASM is a leading, global supplier of semiconductor wafer processing equipment. Our ambitious team is dedicated to delivering innovative technology solutions to the world’s leading semiconductor manufacturers. We have over 2,200 employees based in 16 countries, including Belgium, Japan, Netherlands, South Korea, Singapore, Taiwan and United States. Together we work to develop Epitaxy, ALD, PEALD, Vertical Furnaces and PECVD thin-film deposition technologies for our customers. Our goal is to remain an industry leader by being ahead of what’s next. We accomplish this by focusing on finding collaborative solutions to make integrated circuits, or chips, smaller, faster and even more powerful. ASM, an inclusive workplace We at ASM are a truly global organization that works diligently with an open-mind in all areas of our business. We strive for a culture and work style that fosters trust and transparency. We put our people first, and that is how we will continue to succeed. We are an equal opportunity employer and value diversity. We recognize and value the differences between individuals, including gender, ethnicity, religious beliefs, sexual orientation, knowledge and experience, work background, age, skills, amongst others. Recruiting and developing a diverse workforce provides a wide range of perspectives. This enables a culture of continuously exploring and adopting new technological ideas and innovations, and it also enables us to deliver excellent products and service to our clients.

* Proficient in Mandarin Chinese(native level) and English. * In charge of customer account * To implement problem-solving processes in the Taiwan organization, and work with the Sales and Service organization on the improvement of product reliability at customer sites, and reduce Cost Of Ownership to our customers * Deliver technical presentation to customers, particularly on details of product design, technology, applications and safety * Regional authority for product selection * Promote new product and coordinate the local resources to manage Loan & Evaluation programmes * Resolve technical and applications issues

因應半導體產業成長，公司目前擴大招募各項職務專業人才！！！ 歡迎查看104所有職缺，請針對有興趣的職缺【主動應徵】讓主管看到您的履歷， 通過書面審核會主動與您聯絡邀約面試。 不管在生產製程、品質技術、自動化設備、職安環保...等 只要跟化學材料相關的，都可以找到發光發熱的舞台！ 對高階電子材料、生產製程有熱情的你，歡迎加入關東鑫林，一起為世界打造下一顆晶片的力量！ **各項職務上班時段、地點、薪資皆不相同，詳細請查看各項職務內容，或於面試時說明** **請針對有興趣的職缺【主動應徵】讓主管看到您的履歷，通過書面審核會主動與您聯絡邀約面試，勿直接投遞此職缺，謝謝您**

【請同時至科林研發官方網站投遞】 此職缺履歷登錄網址 https://reurl.cc/gD31KL Technical 1.Responsible for completion of process support and installation of Lam equipment at customer sites. This includes evaluation and documentation of process outputs of hardware modifications/upgrades to existing systems. 2. Setup and complete experiments, collect data and generate reports for both internal and external distribution. 3. Design and complete DOE (Design of Experiments) evaluations to characterize process window for new installations or Lam recommended field hardware modifications/ upgrades. 4.Develop new processes for small variants to existing customer applications. 5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution. 6. Work with senior engineers and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues/ challenges. 7. May develop new processes for small variants to existing customer applications. 8. May recommend / initiate escalations and quality investigations. 9. Present technical and marketing materials to a high standard. 10. Any other duties as assigned by the immediate supervisor. Customer Relation 1. Develop good customer relations during start-up and trouble-shooting; Work closely with customer to understand customer issues and demands. 2. Professionally represent the company to the customer. 3.Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified. 4. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc.) in good working condition, accounted for and secure. 5. Can support process projects and manage customer and product group to drive to closure. *請檢附英文履歷**請載明多益成績*

This vacancy is open for talent pool collection. We will contact you if we have proper vacancies that fit with your profile. Job Mission Represent manufacturing and act as gatekeeper from manufacturing to D&E function Add value in overall manufacturing processes such as forming, machining, joining, and assembling Job Description Contribute to the solution of faults and takes the necessary initiatives and practical decisions to ensure zero repeat Identify gaps and drive assigned process improvement projects and successful delivery Initiate and drive new procedure changes and projects Develop and maintain networks across several functional stakeholders Prioritize works and projects based on business situation Transfer knowledge and train colleagues on existing and newly introduced products Education Master degree in technical domain (e.g. electrical engineering, mechanical engineering, mechatronics) Experience 3-5 years working experience in design engineering Personal skills Show responsibility for the result of work Show proactive attitude and willing to take initiative Drive for continuous improvement Able to think outside of standard processes Able to work independently Able to co-work with different functional stakeholders Able to demonstrate leadership skills Able to work in a multi-disciplinary team within a high tech(proto) environment Able to think and act within general policies across department levels Diversity and inclusion ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions.

一、【日本滋賀-CAM工程師】 ◆薪資： 月額基本給：25万円~35万円 (年收約400万円~620万円) ◆工作內容： ・使用CAD/CAM系統製作機械零件及零件加工數據 ・使用銑床和NC Router進行切削加工、設計與製作加工治具以及維護管理 ・規劃和執行多部件的組裝工作、負責加工過程中的檢查和品質監控 ・其他主管交辦事項 ◆需求條件： ・日本語N1 ・NC program、CAM的基本知識 ・具備操作MasterCAM的技能尤佳 二、【日本滋賀-品質管理&技術口譯】 ◆薪資： 月額基本給：22.6万円~ (年收約335万円~460万円) ◆工作內容： ・技術相關的日語口譯與文件翻譯 ・新產品開發與導入時的品質檢討與計畫制定 ・製造流程與檢查標準的管理 ・異常或客訴時的原因分析、對策提出與客戶應對 ・技術文件（規格書、作業標準等）的管理 ・與海外據點合作，推動供應商品質改善 ◆需求條件： ・日本語N2以上/商用英文能力 ・具備切削加工圖面的專業知識且進行日語→中文/英文技術翻譯者 三、【泰國-品質管理&技術口譯】 ◆薪資： 月額： 約THB100,000(包含住宿、各項補助在內) ◆工作內容： ・ 負責確認日本及泰國國內客戶的訂單內容（規格）、進行價格協商與交期調整。 ・ 與泰國國內供應商進行談判與協調，並執行品質管理相關業務。 ※ 根據客戶提供的圖面，與供應商協商生產規格，從試產到量產的導入、品質管理與品質保證。 ・ 推動成本降低活動與業務改善活動。 ◆需求條件： ・了解切削加工圖面 ・ 具備機電一體化領域的業務經驗 ・ 具備日文能力N2以上&商用英文能力 ・可接受外派至泰國 四、【日本大阪-供應鏈管理專員<儲備幹部>】 ◆薪資： 月額基本給:35 万円~45 万円(年収:580 万円~700 万円) ◆工作內容： ・確認客戶訂單規格、價格與交期，跟進試作至量產，多數為重複訂單。 ・與國內外供應商確認發注內容，協調價格與交期，掌握整體供應鏈流程。 ・處理各項客戶需求與問題，保持良好聯繫（拜訪、線上會議、郵件、電話）。 ◆需求條件： ・具備日文能力N2以上&商用英文能力 ・具有製造業或商社工作經驗 ・具有海外供應商管理經驗 ・能閱讀切削加工相關圖面 五、【日本大阪-海外業務<儲備幹部>】 ◆薪資： 月額基本給:29万円~40万円(年収:500 万円~630万円) ◆工作內容： ・負責功能性材料的海外銷售（既有客戶維護與新規開發 主要市場涵蓋中國、台灣、東南亞、印度等。 ・與供應商協調價格與交期，執行出口安排及物流成本管理。 ・管理銷售額與利潤，並進行績效報告。 ◆需求條件： ・具備日文能力N2以上&商用英文能力

【部門說明】 本部門在新產品開發階段負責製程設計與驗證(Process Design & Validation), 透過DFM評估以及跨部門討論來改善產品設計, 規劃生產流程並導入大量生產。 在這裡工作可以學習到： - 縱向開發與研究先進製程技術及橫向跨部門溝通協調，會應用到設備整合的知識、產線規劃與數據分析的技巧。 - 了解SMT與機構組裝未來趨勢，研究微型化與先進製程應用。 - 運用自身工程經驗，配合DFM、PFMEA等方法，評估產品的可製造性與潛在風險，並研究新的製程、材料與設備應用。 - 垂直整合完整的工廠流程，熟悉新產品從研發到量產的所有工作，深度了解設計端與製造端的連結。 - 該職位是多面向整合的要角，需統整產品開發時的問題，透過跨部門溝通協調與整合能力，解決生產線上的品質、製程、材料相關問題。 - 研發與製造團隊間的橋樑，並與國外工程師共同合作，拓展國際視野 。 【工作內容】 - New product design review for manufacturing - Introduction of new product prototype/pilot run, verification and mass production -Evaluation, development and introduction of new materials, processes and advanced production technologies. -Abnormal quality and failure analysis and improvement. (PFMEA) -To coordinate cross function team and do risk assessment for making (consolidating) the decision of production/manufacturing -To communicate production status, issues with cross function team and lead / drive cross function team on issue solving -To handle the regular PID (Product In Development) meetings and coordinate follow-ups

Job Description: • Develop next generation conductive ink or adhesive for smart phone display or automotive display or other applications • Explore new adhesive platforms through patent landscape analysis, fundamental understanding, experiment design, data analysis, and result interpretation • Establish new methodology development and improvement to simulate customer in line test results/ issue, formulate products to solve customer technical challenges and communicate with customers • This role is responsible for collaborating with different functions including Application/Quality/scale-up Engineering/Manufacturing/EHS, etc., to deliver new products Job Qualifications: • PhD degree in Polymer chemistry/Chemical Engineering/Chemistry/Material Science is required • Experience in process, dispersant and filler selection for adhesive containing inorganic or organic fillers is prefered • Experience in acrylic, polyurethane, epoxy or silicone type UV or moisture curing adhesive is plus • Experience in formulation development, DOE experience and industrial working experience is a plus • Independent researcher as well as team player • Strong interpersonal and communication skills • Fluent in English & Mandarin. • Be able to travel to US and within Asia.

透過ASM官網投遞此職缺，將優先安排履歷審核 【English resume is required】 Please apply for this position ONLY through ASM website : https://www.asm.com/open-vacancies/snr-field-process-engineer?gh_jid=4608395101 ASM is recruiting for multiple FRESH GRADUATE headcount of Field Process Engineer in our ALD/EPI/PEALD/CVD business function located in South Taiwan. As part of a team, you'll provide process support / trouble shooting at client site. As a key driver of business success, you will play a vital role in strengthening and enabling business success through developing and improving processes run on our tool sets at customer sites. As a Field Process Engineer you will be responsible to understand our customers’ needs, and provide process support and subsequent implementation with alignment with BUs to ensure we deliver service and value to meet even exceed customers’ expectation. As an engineer at ASM, you’ll have the opportunities to get involved in a wider scope of work compared to our larger competitors. While the workload is challenging, you are given the independence and autonomy to perform at your peak. This work requires thinking “outside of the box” in an innovative manner, so you must have the ability to collaborate with others to deliver creative solutions, work well under pressure and pay great attention to small details. Responsibilities: • Assist in the installation, operation, and maintenance of process equipment at client sites. • Monitor and analyze field processes to identify opportunities for efficiency improvement, yield enhancement, and cost reduction. • Dig into problem and resolve technical issues, collaborating with multidisciplinary teams to ensure minimal downtime. • Gather and interpret operational data, providing insights and recommendations for process improvements. • Maintain accurate records of processes, equipment performance, and troubleshooting activities. Prepare detailed technical reports. • Ensure all field activities adhere to company safety standards and regulatory requirements. • Contribute to the development of new processes and improvement of existing operations • Drive continuous improvement of the customer experience through team, process and support tool development. • Define project scope and resource planning together with BU, escalate to Manager for resource gap. • Support CS EE /Sales/BU as one team to success site base operation/service. ASM is a leading, global supplier of semiconductor wafer processing equipment. Our ambitious team is dedicated to delivering innovative technology solutions to the world’s leading semiconductor manufacturers. We have over 2,200 employees based in 16 countries, including Belgium, Japan, Netherlands, South Korea, Singapore, Taiwan and United States. Together we work to develop Epitaxy, ALD, PEALD, Vertical Furnaces and PECVD thin-film deposition technologies for our customers. Our goal is to remain an industry leader by being ahead of what’s next. We accomplish this by focusing on finding collaborative solutions to make integrated circuits, or chips, smaller, faster and even more powerful. --- ASM, an inclusive workplace We at ASM are a truly global organization that works diligently with an open-mind in all areas of our business. We strive for a culture and work style that fosters trust and transparency. We put our people first, and that is how we will continue to succeed. We are an equal opportunity employer and value diversity. We recognize and value the differences between individuals, including gender, ethnicity, religious beliefs, sexual orientation, knowledge and experience, work background, age, skills, amongst others. Recruiting and developing a diverse workforce provides a wide range of perspectives. This enables a culture of continuously exploring and adopting new technological ideas and innovations, and it also enables us to deliver excellent products and service to our clients.

【主要工作內容】 1.TEM/FIB客戶案件整合分析 2.對外客戶報告回饋，提供問題討論服務 【附加工作內容】 1.TEM專案管理與執行 2.TEM品質改善 3.TEM技術研發與產品研究 4.TEM技術推廣

【本職缺接受科林研發官方網站投遞】 請至科林研發官方網站投遞個人履歷表，此職缺履歷登錄網址: https://careers.lamresearch.com//job-invite/184029/ Technical 1 Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites. 2 Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions. 3 Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification. 4 Maintain records and reports to coordinate activities between Lam and the customer. 5 Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction. 6 Transparently discuss opportunities and challenges with customer to increase trust. 7 Update customer on status of Lam tools as needed. Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2. Shadow more experienced engineer at customer site

1. 半導體相關製程實務經驗 2. 與客戶進行研發項目的流程開發 3. 處理演示請求以促進設備銷售 4. 技術介紹的銷售支持 5. 與總部溝通以進行持續改進計劃 6. 其他公司交付任務 7. 需具備良好英文溝通能力 公司參考網頁: www.evgroup.com

1. To improve device yield &CIP in order to meet customer request and customer service. 2. Identify and solve process and device problems. 3. Support for customer visit and audit.

1. 新材料評估、測試及導入。 2. 2'nd source取代。 3. 供應商管理及材料規格書制定。 4. 新產品開發設計。 5. 產品分析及小量生產、經時驗證。 6. 黃光機台操作(TEL、塗佈機、曝光機、顯影機) 7. 檢驗機台操作(OM、SEM、KLA、UV等) 8. 主管交辦其他事項。

【The Role】 The Product development engineer will provide technical solution in Microenvironment mainly focus on FOUP (Front Opening Unified Pod) products through product testing in laboratory and simulation software. This role is ideal for someone who is passionate about mechanical design, problem-solving, and working closely with cross-functional teams to deliver high-quality solutions for the semiconductor industry. 【In this role you will】 • Design and simulate mechanical components using SolidWorks • Develop and test mechanical structures and systems • Develop and test FOUP functions per internal and external requirement • Collaborate with customers to troubleshoot issues, build models, and identify root causes • Work closely with the Sales and MTS teams to align on product requirements and solutions • Support the design team in refining and improving product specifications • Contribute to continuous improvement efforts across product development 【Traits we believe make a strong candidate】 • Bachelor's degree or above in Mechanical Engineering or a related field • 3~5 years of relevant engineering experience • Proficient in SolidWorks, including both design and simulation tools • Hands-on experience with injection molding (required) • Strong mechanical design and testing background • Knowledge or practical experience in CFD (Computational Fluid Dynamics) • Excellent problem-solving and analytical thinking skills • Fluent in English, both written and spoken, with the ability to communicate technical concepts clearly • Strong team collaboration skills; able to work effectively with others, share ideas, and contribute to team success • Self-motivated, detail-oriented, and eager to learn and grow • Experience in the semiconductor industry is a plus • Familiarity with FOUP (Front Opening Unified Pod) systems is a plus 【Your success will be measured by】 • Quality, reliability, and innovation in mechanical design and simulation • Effectiveness in identifying and resolving customer issues • Contribution to cross-functional collaboration with Sales, MTS, and design teams • Timely delivery of project milestones and technical solutions • Impact on product improvement and alignment with customer needs

1.制訂製造程序與產品標準。 2.評估製程專案計劃，訂出最適化的製造流程。 3.負責新產品製程的導入，並進行製程的檢測，以使新產品能夠穩定生產且符合相關標準。 4.定期檢測製程設備的重點參數。 5.持續改善現有生產製程。 Job Descriptions 1. Establish manufacturing procedures and product standards. 2. Evaluate the manufacturing process project plan and establish the optimal manufacturing process. 3. Be responsible for the introduction of new product manufacturing processes and testing of the manufacturing processes in order that new products will be produced stably and comply with relevant standards. 4. Regularly check up the key parameters of the equipment in the manufacturing processes. 5. Continuously improve existing production processes.

The future is ours to create. Whether it’s a driverless car, VR experience, or factory robotics, we help turn theory into possibility. We help create technological devices and ideas that transform our future and shape our current life. We’re looking for Customer Service Engineers who contributes the support and provide unique customer value in the global electronics ecosystem. You will be able to learn the advanced mechatronic engineering and collaborate with leading customers across the globe, our expert teams of physicists, engineers, and problem-solvers design solutions that move the world forward. Roles and Responsibilities • Evaluates, analyzes, diagnoses and troubleshoots technical equipment problems via telephone or at customer site. Ensures equipment improves customer production. • Repairs of system level problems (which have multiple causes and for which no standard procedures exist) at customer sites. • Represents the company to the customer and assume accountability for customer happiness with service. • Assures operational quality of system equipment. Coordinates actions with customers to minimize down time. • Provides assistance to Installation Engineer in resolving problems. • Prepares fields service reports on customer support activity and provide documentation to other supporting functions on re-occurring problems. • Build positive relationship with customers and increase customer satisfaction by resolving sophisticated requests and issues. • Contribute to the Capturing, Re-use, Collaboration, and Improvement of knowledge using available systems • Develops and handles return materials authorization (RMA) processes for ensuring customer returns, exchanges, service and repairs are done with speed and accuracy and all client/customer service delivery issues are resolved. • Executes technical critical issues with detailed problem statement and pass-down to work with system engineering technical team in customer site. • Estimated travel is 20% once trained in the classroom as part of on-the-job training program. Although, much of the job responsibilities will be performed in the office or at the customer site supporting various projects and initiatives. In addition to problem diagnosis and resolution, other support duties will include characterization and support of customer demos and field projects.