「產品工程師」的相似工作

1. MP Management (50%) 1-1. Yield improvement and cost reduction activities. 1-2. Abnormal Lot disposition, diagnose problems and offering a solution with the balance of efficiency and quality control. 1-3. Foundries/OSATs capacity expansion planning and executing. 2. NPI(New product introduction) Management (35%) 2-1. Coordinate new Tape-out schedule and release to MP activities. 2-2. Perform and consolidate product reliability qualification. 3. Cross-department support, consolidate specific activities. (10%) 4. Advanced foundry process technology survey and implementation. (5%)

1. Foundry Tapeout Account 申請。 2. Foundry 製程能力評估和Tapeout 與良率提升。 負責評估Foundry製程能力，Tapeout 作業，持續推動製程優化，進而提升產品良率。 3. 跨單位工程問題協調 代表公司與客戶、Foundry、封裝廠及光罩公司協同解決各項工程相關問題。 4. 產品流程管理與分析 負責從Tape Out、Mask Job Review到產品量產的全流程管理，並進行與協力商處理ESD與Latch Up分析。 5. 封裝評估與導入,與測試數據分析. 6. HTOL QUAL 和 Package QUAL可靠度測試,與RMA分析. 7. 異常問題查證與製程改善 當產品異常發生時，運用EFA/PFA找出低良率原因，並與RD、Fab及Assembly部門協作解決，持續推動製程改善。 8. 熟悉Packaging(WLCSP、wire bond、Molding...)與Testing(CP、FT...)各階段等，知道如何與Test Engineer/外包討論ATE平台、測試coverage、bin split 等議題 9. PDK及相關文件管控 主導PDK及相關文件的申請作業，並與PM/RD團隊密切合作，嚴格控管文件版本，確保資料一致性與最新狀態。 10. 主管交辦事項.

1. 熟悉FAB 8”wafer Driver、Power IC/MOS/CSP Module等產品製程相關經驗 2. 具備量產WAT/CP/FT driver與MOS產品良率分析與異常處置 3. 熟悉電性分析、FA失效分析工具、Yield Hub 等良率分析軟體操作經驗 4. 良率改進、供應商管理 5. 協助QA客訴異常分析/驗證與root cause問題查找分析處置經驗 6. 其他主管交辦事項 【工作待遇依工作經歷敘薪】

1.協助客戶與原廠產品對接 2.協助原廠開發新材料應用 3.協調公司內部資源及客戶需求 4.開發潛在客戶，拓展市場 5.客戶拜訪，維繫客戶關係

MaxLinear is seeking a Staff Product Engineer to join our growing team in Taiwan. In this role, you will be responsible and focus on the following: • Full product life cycle ownership • Co-define ATE test, characterization, qualification, manufacturing plans • Co-define test spec and control limit • Co-work on CRAs analysis • COGS analysis and reduction • Data and yield analysis and improvement • Co-work with internal cross-functional teams and OSATs

Please apply this role through https://careers.synopsys.com/job/hsinchu/r-and-d-engineering-sr-staff-engineer/44408/84900058096 Synopsys is looking for motivated Product Engineer to help design, develop and test state of the art Static Timing, Characterization and Library modelling tools. The primary focus of the Product Engineer is closely working with R&D team, to influence technologies/solution roadmaps and provide R&D team with accurate input from Field AEs, helping them focus on the most critical design challenges and help define solutions to critical problems. The engineer will work closely with Field AEs, ensuring overall consistency of end-to-end design and analysis flow to meet customer needs. The engineer will also work with Sales and Marketing teams to find and develop new markets, drive new tool evaluations and help customers with the adoption and continuous usage of Static Timing, Characterization and Library Modelling, thus enabling Chip Design customers achieve best Timing, Power and Characterization Goals. Synopsys’ existing and forthcoming tools offer an advanced transistor-level static timing characterization and library modelling solution that addresses the existing and emerging challenges in custom and memory design. They offer predictability and improved productivity to designers. Their concurrent timing, SI features and advanced variation aware analysis enables designers to accurately and quickly identify design issues early-on and avoid expensive late-finding of problems in silicon. Main responsibilities: • Drive new products and new product features that exceed customer needs. • Work with RnD to enable timely implementation of new products and features, and important bug fixes. • Provide consultation to prospective users and/or product capability assessment and validation. • Provide tool trainings to customers and Field AEs. • Provides technical expertise to sales staff through sales presentations and product demonstrations. • Assists the sales staff in assessing potential application of company products to meet customer needs and preparing detailed product specifications for the development and implementation of customer applications/solutions. Requirements: We are looking for an innovative, motivated, and dependable person, with at least BS degree and 8+ years of recent hands-on experience including: · Exceptional expertise in transistor-level analysis and debug circuit level issues for SRAM, RF, ROM memories and Standard Cells. · Good exposure to static timing concepts and CMOS engineering fundamentals. · Good knowledge of TCL and or other scripting languages. · Very good communication, social and leadership skills. Plus: · NanoTime or PrimeLib experience highly desirable.

1. 新產品開發驗證以及量產條件的決定 2. 量產品管理及良率改善，量產品產品特性分析，客退品分析報告 3. 新技術開發平台開發

1.Chip level IR drop 分析 2.Chip power estimation/calculation 3.IR drop flow 建構 4.IR drop tool 維護 5.撰寫程式

1. 國內出差處理客訴問題 2. 國內出差解決客戶的產品安裝問題 3. 維修不良產品 4. 主管交辦事項

1.客訴分析處理與協助廠內改善跟催 2.處理客戶生產加工上所遭遇的問題, 解決並提供協助與對策 3.協助集團公司處理產品可靠度驗證與客訴問題 4.產品可靠度驗證暨產品可靠度監控 5.協助改善可靠度作業流程 6.HTOL/bHAST/PTC burn-in board規劃 7.ISO文件/表單制定及修改 8.其它主管交辦事項

1.記憶體晶片CP/FT測試程式開發維護(Advantest ) 2.新產品開發驗證 3.測試程式開發與良率、穩定性改善 4.量產產品測試良率分析處理

【Position Overview】 We are seeking a highly motivated and experienced Foundry Engineer to join our team. In this critical role, you will be responsible for driving product yield, performance, and reliability by collaborating closely with internal teams and external silicon foundries. You will identify the root cause of process, device, and defect-related issues, propose and execute improvement plans, and ensure to meet our yield KPIs and product timelines. This position requires a strong technical background in semiconductor manufacturing, excellent problem-solving skills, and the ability to work effectively in a collaborative environment. 【Responsibilities】 1. Lead foundry engineering activities to drive product yield, performance, and reliability/quality to fulfill product needs. 2. Collaborate with cross-functional teams to ensure timely new product introduction and proactively address potential issues. 3. Develop and execute yield improvement plans by collaborating with internal teams or external foundries. 4. Ensure high production quality control through in-depth analysis, inline and WAT monitoring, and investigation of customer returns. 5. Manage projects effectively to meet deadlines and achieve objectives. 6.Other tasks assigned by supervisors.

1. 專案管理 / 執行 2. 需出差(北中南) 3. 繪圖:3視圖經驗

Focus areas: Delivery, cycle time, and line yield. 1. Handover from RD and maintain mass production product 2. Line Yield enhancement and monitor 3. 有在MOS CP/FT廠，或BGBM 廠，孰悉運作等相關經驗者尤佳。 4. 擴產驗證評估 5. Back-end process monitor and maintain

1. 負責產品組裝試產 2. 負責產品導入產線量產 3.PE(測試)工程 4.PE(組裝)工程

【成為円星人】 円星科技由一群專業與充滿熱情的夥伴創立於2011年，為積體電路矽智財設計服務業之新秀，秉持著『成為半導體業最值得信賴之IP公司』的願景，追求永續經營與成長。 誠摯歡迎您成為円星人，加入我們，站上國際舞台！ 一起共同打拚，以精品文化之精神，創造價值，追求卓越！ 【職務簡介】 M31主要業務為向 IC 設計業者和晶圓代工廠授權 IP，此職務為負責High Speed interface相關PHY IP進行電氣特性驗證(測試), 功能驗證(測試)之職缺。 【將負責的工作內容】 1. USB, SATA , PCI-e , MIPI PHY 高速I/O介面之電氣特性量測 2. PCB board design for High-Speed I/O interface 3. FPGA board design for High-Speed I/O platform 4. USB, SATA, PCI-e, MIPI C/D/M-PHY高速I/O介面之認證測試 5. 協助Analog/Digital RD進行testchip測試 6. 與合作廠商之Controller進行系統整合驗證與測試 7. 協助客戶進行 FPGA驗證 與 客戶產品之初期驗證 【條件與特質】 1. 擅長工具： -EMC/EMI -FPGA -OrCAD -PowerPCB -USB技術 2. 熟悉USB, SATA, PCI-e, MIPI等高速I/O介面之電氣特性與認證流程 3. 熟悉高速示波器,BERT, ENA & AWG 4. 測試自動化程式(Labview)之規劃與撰寫(option) 5. 認真負責、配合度高 6. Any of following experience are plus -PCB Layout -PCB焊接 7. 有 TV Engineer 相關工作經歷 5 年以上 8. 電機電子相關科系碩士畢業 如果您有以上相關經驗且對此職缺有興趣，歡迎投遞您的履歷！

1.PCB測試板工程變更/Debug/Maintain(需要焊接) 2.PCB測試板上機驗証(需PCB維修相關經驗，維修過LB、PC、BIB尤佳) 3.面對客戶、與客戶溝通工程內容

You will be responsible for manage and control shopfloor related to ensure quality / delivery / cost and safety meet company standard setting and meet government requirement. Coordinating related department to let production running smoothly. You will also join operation module team activity to ensure projects continue progress. 管理並掌握生產線相關事宜並確認可滿足品質/交期/成本及安全之相關需求可合乎公司標準規範或政府相關法規規定。協調支援單位提供必要支援以利產線運行。並加入營運處相關專案，以利專案推展順利。 What you will be doing: • To lead production line meet quality / delivery and cost standard 帶領生產線產出合乎品質交期成本的產品。 • To lead production line meet company policy and government requirement 帶領生產線符合公司政策及政府法規需求 • To coordinate related department let production line running smoothly. 協調其他相關部門提供必要支援以利產線順利生產。 • To support operation teams’ activity to ensure projects continue progress. 支援營運團隊相關活動並確認相關專案可順利推展。

1. 建立封裝圖 2. 建立測試規格及測試程式 3. 測試低良率分析與處理 4. 新封裝製程評估 5. 新外包封裝廠評估 6. 設備及材料變更評估

工作概覽： 參與CMOS平台製程開發、元件設計與電性優化，支持新產品導入、製程整合與技術創新，為特殊應用產品提供完整的製程與元件解決方案。 主要職責： • 負責0.35um CMOS製程模組與整合開發。 • 參與元件(如MOS、HVLDMOS、電容、電阻等)之設計與TCAD模擬驗證。 • 建立元件模型(SPICE/LPE) 與電性分析，協助PDK開發。 • 協同設計團隊進行元件規格定義與效能驗證。 • 支援新產品導入、製程異常分析與良率改善。 資格條件: • 熟悉0.35um CMOS製程平台。 • 具元件設計、TCAD模擬或SPICE建模經驗者尤佳。 • 具備製程整合、電性量測與數據分析能力。