「R0013 - Hardware engineer(Console/Radios/Workstation)」的相似工作

Ubiquiti Taipei office is looking for a Hardware Engineer who shares our passion for innovation and technology and desire to do something extraordinary. This position will enable you to participate in hardware design for Ethernet products, like Ethernet Switches and Gateway routers with worldwide impact. You will be in touch with our R&D labs from different countries around the globe. We expect you to bring your experience, enthusiasm, and creativity wherever you go and put them in the work you do. You should be able to think out of the box when finding solutions to new problems and make things work. Responsibilities: - Hardware circuit design, PCB layout review, design verification testing. BOM maintenance, production and RMA failure analysis - Survey and evaluate new solutions/platforms - Involved product life phase from NPI, MP, to EOL - Co-work with function teams, PCB layout, component engineering, firmware, mechanical engineering, electrical power engineering, thermal engineering, QA, software engineering, project management, ID, compliance engineering, etc.

Overview: At Ubiquiti, our mission is to rethink IT—not just by making powerful networking technology more accessible, but by delivering frictionless product experiences tailored to our users. This pursuit begins at our R&D Center in Taiwan, where we not only build innovative products, but a culture of trust, transparency, and collaboration. Responsibilities - 5~8 years’ work experience as a Key EE designer for VoIP, Conference, Mobile, or Tablet products. - Mainly focus on system schematic review and mechanical stacking review with mechanical engineers and PCB layout review with layout engineers. - Work with Audio, ME teams to figure out performance issues of radios and work with SI and DQA engineers to qualify features and make sure product quality is ready to move further. - Review design derating and suggest design update due to DFM (design for manufacturing), DFA(design for assembly), and DFC (Design For Cost). - Schematic and BOM maintenance and review. - Write test plans for testing coverage, execute tests, and document test results for projects. - Report projects’ status and issue tracking to the internal team. - Teardown and review new products in the market. - Participate in the hardware design and system architecture of VoIP products, including ATA devices, IP Phones, and voice-enabled access control systems. - Design and implement audio circuits including CODEC, I2S, SLIC/SLAC, analog amplification, echo cancellation (AEC), and noise reduction (NR). - Integrate Ethernet/PoE, USB, SPI, UART, I2S, TDM, and other communication/audio interfaces. - Collaborate with the software team to implement and debug Android/Linux audio drivers, HAL layers, and power control strategies. - Support low-power design techniques such as Dynamic Voltage and Frequency Scaling (DVFS). Minimum Qualifications - Have the MP experience with VoIP, Conference, Mobile, or Tablet products. - Solid knowledge of audio hardware design and VoIP communication protocols (SIP, RTP). - Experience with Android and/or Linux system integration for embedded hardware platforms. - Familiarity with high-speed signal design. - Solid knowledge of audio hardware design and VoIP communication protocols (SIP, RTP). - Experience with Android and/or Linux system integration for embedded hardware platforms. - Proficiency in using OrCAD Capture CIS, Power PCB viewer, and Allegro viewer - Knowledge of electronic components (Ex, R/L/C/Diode/MOS/BJT/Logic ICs/Sensors) - Strong knowledge of ESD, EMI, and Surge. - Debug skills with the basic operation of oscilloscopes and logical analyzers. - Strong knowledge to support the thermal solution. Preferred Qualifications - Experience with DVFS implementation and system-level power optimization. - Background in developing products such as SIP intercoms, IP Phones, VoIP gateways, or voice-enabled control terminals. - Proficient in diagnosing audio issues such as echo, feedback, and electrical noise. - Experience integrating ALSA, PulseAudio, or Android Audio HAL layers. - Leadership in projects - Aggressive, open-minded, and positive attitude - Familiarity with the network configuration - Familiarity with test equipment like TDR, Network Analyzers

About Ubiquiti At Ubiquiti Inc., we create technology platforms for Businesses, Smart Homes, and Internet Service Providers, driven by our goal to connect everyone, everywhere. To date, Ubiquiti has shipped over 100 million devices worldwide, from ISP networking products to the next generation of IT solutions. Our growth is made possible by the dedicated team of hundreds behind the scenes. From software developers and product managers to designers and strategists, Team UI is driven to achieve our common goal: Rethinking IT. At Ubiquiti, you’ll heighten your potential and broaden your horizons, all while shaping the future of connectivity. Role Summary As a Hardware Engineer at UI, you will be responsible for the electrical design of consumer electronic products. We are looking for candidates who thrive in a fast-paced start-up-like environment. In this role, you will be the owner of all aspects of EE hardware design, including circuit/board design and validation. To be successful, you need to be highly motivated and detail-oriented while showing the highest standards of responsibility. Responsibilities - Design UI’s future products by owning architecture selection, electrical design, and validation. - Direct and review PCB layout and electrical simulation teams. - Design validation: complete functional verification, signal characterization, power modeling/test, and system coexistence testing. - Troubleshoot, debug, and resolve issues during development, including factory prototype builds. - Bring your design to mass production by setting factory test requirements and assisting in software bring-up. Minimum Qualifications - BS degree in electrical engineering or related field - 5+ years of hands-on experience in consumer electronics/embedded systems design, prototyping, bringing up, debugging, functional verification, and NPI support, DFx (Design for cost, test, manufacturing) experience - Experience with Cadence OrCAD, Allegro, PADS, or equivalent. - Electrical engineering or design experience in one or more of these areas: SOCs/MCUs, -- Power Management, Signal Integrity, and/or Analog/RF. - Knowledge of PoE converters, DC/DC converters, power management methods, audio circuit design, high-speed, and analog circuit design - Knowledge of processor architecture, digital circuit design, and various communications protocols such as I2C, UART, SPI, Ethernet, and USB, etc. - Knowledge of developing robust designs for ESD, EMI immunity, and RF Desense. - Ability to be hands-on in the lab and want to be in the details (soldering, oscilloscopes, data acquisition). - Team player with good communication skills Preferred Qualifications - Master's degree in electrical engineering or related field. - Knowledge of high-speed digital interfaces such as PCIe, DDR3/4, MIPI, LVDS, etc. - Experience with analog design, low power design, audio acoustics, various RF technologies (such as WiFi/BLE/ Zigbee/NFC) - Experience with physical characterization of sensors such as light sensors, ToF sensors, Temperature sensors, Radar sensors, G-sensors, etc.

About Ubiquiti At Ubiquiti Inc., we create technology platforms for Businesses, Smart Homes, and Internet Service Providers, driven by our goal to connect everyone, everywhere. To date, Ubiquiti has shipped over 100 million devices worldwide, from ISP networking products to the next generation of IT solutions. Our growth is made possible by the dedicated team of hundreds behind the scenes. From software developers and product managers to designers and strategists, Team UI is driven to achieve our common goal: Rethinking IT. At Ubiquiti, you’ll heighten your potential and broaden your horizons, all while shaping the future of connectivity. Responsibilities - Perform electrical validation of high-speed interfaces such as PCIe Gen3~Gen5, Ethernet (802.3 10G/25G/100G/400G), DDR4/5, SATA, and USB3 - Perform electrical validation of low-speed interface, including I2C, SPI, MDIO, eMMC, and RGMII. - Perform chip-to-chip SerDes signal validation, including SGMII+, UXSGMII interfaces. - Plan and execute power testing strategies for multiphase power stages and DC buck converters. - Perform power integrity validations, including ripple noise analysis, power sequencing verification, electronic load (E-load) operation, and power supply unit (PSU) evaluation. - Develop and execute test scripts under Linux environments, familiar with shell commands and automation scripting. - Collaborate with the HW team and chip vendor to define and document SI/PI validation plans and requirements. - Analyze and identify SI/PI issues, and work closely with HW, FW, layout teams, and chip vendors to develop improvement solutions that enhance electrical performance and signal integrity quality. Requirement - Solid experience with SI test equipment (oscilloscope, BERT, VNA, TDR). - 3+ years of hands-on experience in Signal Integrity, and SerDes/PCIe/USB/DDR validation. - Solid understanding of compliance testing methodologies, eye diagram, and litter analysis. - Strong understanding of low-speed interface protocols and comprehensive experience in AC/DC characteristic validation. - Bachelor’s/Master’s degree in Electrical Engineering, Electronics, or related fields. - Excellent problem-solving skills, ability to debug SI/PI issues, and strong cross-functional communication with HW design and layout teams. Preferred Qualifications - Experience working on system-level signal validation in server, networking, or storage platforms with high-speed interfaces. - Familiarity with Power Integrity validation, including power sequence, ripple noise, OCP, and SCP testing. Benefits - International work environment and collaboration with global development teams - Excellent work conditions - Competitive package: great pay, perks, and benefits - Group insurance and health coverage - Flexible working hours and patterns - Complimentary drinks and snacks at the office

At Ubiquiti, our mission is to rethink IT—not just by making powerful networking technology more accessible, but by delivering frictionless product experiences tailored to our users. This pursuit begins at our R&D Center in Taiwan, where we not only build innovative products, but a culture of trust, transparency, and collaboration. Responsibilities (What he/she will do after join UI): - 5~8 years’ work experience as a Key EE designer for Mobile, Tablet or AP products. - Mainly focus for system schematic review and mechanical stacking review with mechanical engineers and PCB layout review with layout engineers. - Work with RF engineers to figure out performance issues of radios and work with SI and DQA engineers to qualify features and make sure product quality is ready to move further. - Review design derating and suggest design update due to DFM (design for manufacturing), DFA(design for assembly) and DFC (Design For Cost.) - Schematic and BOM maintenance and review. - Write test plans for testing coverage, execute tests, and document test results for projects. - Report projects’ status and issue tracking to internal. - Teardown and review new products in the market. Minimum Qualifications (MUST-haves) : - Have the MP experience with Mobile, Tablet or AP products.. - Familiarity with high-speed signal design. - Proficiency on using OrCad Capture CIS, Power PCB viewer and Allegro viewer - Knowledge of electronic components (Ex. R/L/C/Diode/MOS/BJT/Logic ICs/Sensors) - Strong knowledge of ESD, EMI and Surge. - Debug skills with the basic operation with oscilloscopes, Logical Analyzers. - Strong knowledge to support the thermal solution.

1. In-depth knowledge of PCB layout, OrCAD/Allegro tools, circuit design, and PCB structure. 2. Prepare technical documentation including product specifications, layout instructions, test procedures, etc. 3. Transfer products to manufacturing with clear documentation and help C.M. and technical support to solve problems. 4. Hardware engineer need co-working with PM, BIOS, IPMI, EMI, Thermal, ME RD friendly. Need have good team work. Need to have the concept of project ownership. 5. Need have power VR and component design knowledge 6. Resolve complicated issues and drive to root cause on critical engineering problems

The Sr. Staff/Staff Engineer, Power PSU/BBU/ESS will be based in Taiwan Taipei Wugu Site. These roles perform the responsibility for system design in Tier 1 customer's BBU/ESS Projects request. What a typical day looks like: • Design high power density AC/DC and DC/DC BBU (Battery Backup Unit) system for server, telecom, datacenter and industrial application. • Support RFI and RFQ and provide design proposal. • Provide BBU design solution to implement design review with customer • Experience in leading R&D team is preferred • Component standardization, optimize design and deep drive on cost reduction • Overall project responsibility in all aspects on EE design related- from project kick off to end of M.P. • Tolerance analysis & simulation and Issue solving The experience we are looking to add to our team: • Bachelor or above degree in electronics or electrical • 8+ years' experience for PSU, UPS, BBU or EV charger design • Be highly passionate and interested in BBU development and capability of team work in multi-task environment • Solid understanding of software implementation/design experience is required. • Capability of independent research and working with new technologies is required. • Excellent written and verbal communications skills (in Mandarin and English) is required. • With strong sense of responsibility (be able to go on business trips, dispatch overseas is preferred) The information we collect: We may collect personal information that you choose to submit to us through the Website or otherwise provide to us. This may include your contact details; information provided in online questionnaires, feedback forms, or applications for employment; and information you provide such as CV/Resume. We will use your information for legitimate business purposes such as responding to comments or queries or answering questions; progressing applications for employment; allowing you to choose to share web content with others or; where you represent one of our customers or suppliers, administering the business relationship with that customer or supplier.

1. Product hardware platform evaluation/design/verification and optimization. 2. RFI/RFP/RFQ specification confirmation and feasibility assessment. 3. Analysis design issue and debug. 4. Factory manufacturing issue analysis.

About Ubiquiti At Ubiquiti Inc., we create technology platforms for Businesses, Smart Homes, and Internet Service Providers, driven by our goal to connect everyone, everywhere. To date, Ubiquiti has shipped over 100 million devices worldwide, from ISP networking products to the next generation of IT solutions. Our growth is made possible by the dedicated team of hundreds behind the scenes. From software developers and product managers to designers and strategists, Team UI is driven to achieve our common goal: Rethinking IT. At Ubiquiti, you’ll heighten your potential and broaden your horizons, all while shaping the future of connectivity. Responsibilities - System quality assurance to ensure on-time delivery and maintain high quality. - Set testing cases and standards for reliability and design qualifications. - Set compatibility of IP CAM / Doorbell / Camera security Products - Set standards for ORT labs regarding temperature, thermal, reliability, ESD, surge, etc. - Proficient in using oscilloscopes, electronic loads, LCR meters, power meters, and safety testing equipment (Hi-Pot, insulation resistance testers). - Capable of writing test plans and conducting failure analysis (FA, Failure Analysis). - Proficiency in MTBF (Mean Time Between Failures) and FMEA (Failure Mode and Effects Analysis). - Experience in environmental stress testing, especially thermal and reliability systems, and IK Impact and IPXX tests. - Understanding of UL, CE, FCC, IEC60068, MIL-STD-810G, ISTA, ASTM, ISO/TS16949 standards. - Understand the requirements for ESD (Electrostatic Discharge), Surge Test, EMI/EMC (Electromagnetic Interference / Compatibility), and safety testing. Minimum Qualifications (MUST-haves) : - Bachelor's degree & Good English communication skills - An EE / IE degree is better, with knowledge of Networking / Radio / Linux operation - Proficiency in using a multimeter, thermal chamber, data log, and EMC compliance relative - 5+ years of working experience in the hardware test or design quality test field - Love to try and play with new technology and learn the ropes to be the lead test engineer - Familiar with multimeter, Oscilloscope, spectrum analyzer, thermal chamber, power supply, Ethernet traffic analyzer, and electronic load - Good knowledge of setting wireless and Ethernet testing cases. - Experience in hardware testing on POE or battery-powered devices is a plus. - Experience in PoE testing, ESD, thermal testing, power consumption testing, RMA failure analysis and tracking, reliability testing, 2nd Source verification, mechanical inspection, etc. - Enjoy hands-on installation of electronic and consumer tech products, and analyzing their weaknesses from a user’s perspective. - Possesses good emotional intelligence and excellent cross-departmental communication skills. Preferred Qualifications (Nice-to-haves / Plus) : - Basic knowledge of MTBF calculation/test - Familiar with multimeter, Oscilloscope, spectrum analyzer, thermal chamber, power supply, Ethernet traffic analyzer, and electronic load - Good knowledge of setting wireless and Ethernet testing cases. - Experience in Hardware/Firmware testing on Camera, IP CAM, Wireless related enterprise products, is a plus - Experience in RMA failure analysis and tracking, DOE(Design of Experiments), 2nd Source verification, mechanical inspection, etc. - Creative and passionate about exploring new technology applications, unafraid to break conventions and embrace challenges. - Proficient in using tools such as Python, Raspberry Pi, and Arduino. Benefits - International work environment and collaboration with global development teams - Excellent work conditions - Competitive package: great pay, perks, and benefits - Group insurance and health coverage - Flexible working hours and patterns - Complimentary drinks and snacks at the office

Responsibilities include: 1. Act the staff/sr. role to develop shelf controller module inside OCP ORV3 21 " or 19" rack to monitor and control Power and BBU shelf for data center. 2. Familiar with ARM Cortex A7 BMC AST2600/2620 chip or Intel x86 CPU design. 3. Experiences for Linux embedded board bring up and debugging. 4. Good knowledge of protocol for IPMI, I2C, UART, SPI RS485, Redfish. 5. Lead for schematic circuit design and PCB layout review. 6. Familiar with, CanBus, Modbus communication, ethernet, PoE, eMMC, security feature 7. Familiar with DC/DC converter circuit design, buck-bust converter and flyback . 8. Signal integrity and power integrity measurement and verification. 9. Support RFI and RFQ activities and provide technical proposal. 10. Good communication in English, both oral and written. Capable to talk and discuss technical topic in front of customer. Requirements: • BS in Electrical Engineering or related field. Prefer MS degree or above • 8+ years of related experience in consumer PC/Industrial PC, laptop, RISC and networking related products; for Team Lead prefer least 3 years for people manager role. • Demonstrated strong leadership for product design in multiple-disciplinary environment. • Competence in customer focus innovation and able to drive technology growth • Good communication skills, people management, self-motivation and the ability to successfully deal with ambiguity are a must. • Cadence Orcad capture or Mentor PADS capture. The information we collect: We may collect personal information that you choose to submit to us through the Website or otherwise provide to us. This may include your contact details; information provided in online questionnaires, feedback forms, or applications for employment; and information you provide such as CV/Resume. We will use your information for legitimate business purposes such as responding to comments or queries or answering questions; progressing applications for employment; allowing you to choose to share web content with others or; where you represent one of our customers or suppliers, administering the business relationship with that customer or supplier.

本職位專注於工業級乙太網路交換器及相關產品的硬體設計與開發。 您將參與從前期規格定義、設計實作、原型測試到產品量產的完整流程，並確保產品能滿足嚴苛的工規需求（可靠度、環境適應性與電磁相容性）。此角色需要結合理論基礎與實務經驗，並透過跨部門合作推動產品成功上市。 This position focuses on the hardware design and development of industrial Ethernet switches and related products. You will be involved in the full product lifecycle—from specification definition, circuit design, prototype validation, to mass production readiness. The role emphasizes ensuring compliance with industrial-grade requirements, including reliability, environmental robustness, and EMC standards. Success requires both solid engineering expertise and effective collaboration across functions. [主要職責 / Key Responsibilities] - 規劃與設計電路圖，包含架構評估、元件選型及電性分析 Plan and design schematics, including architecture evaluation, component selection, and electrical analysis - 定義與審核PCB設計，涵蓋層疊結構、佈局規劃及訊號完整性考量 Define and review PCB design, covering stack-up structure, layout planning, and signal integrity requirements - 執行系統功能測試、環境與壽命可靠度驗證 Conduct system-level testing, environmental and reliability validation - 建立並解決原型階段的設計問題，追蹤並持續優化設計品質 Troubleshoot and resolve design issues in the prototype stage, with continuous quality improvement - 熟悉電磁相容/抗擾度測試，具備問題分析與除錯能力 Perform EMI/EMS compliance testing and debugging - 與PM、軟體、機構、驗證、熱設計等團隊合作，確保產品整合順利 Collaborate with PM, software, mechanical, validation, and thermal teams for smooth product integration - 支援量產導入及後續維護改善 Support NPI (New Product Introduction) and post-launch product improvement [任職資格 / Qualifications] - 電機、電子或相關領域學士以上學歷 Bachelor’s degree or above in Electrical Engineering, Electronics, or related fields - 三年以上硬體開發經驗，具網通設備或交換器設計經驗者尤佳 3+ years of hardware development experience; networking or switch design background is a plus - 具備電路設計、PCB佈局審查及相關EDA工具操作能力 Proficiency in circuit design, PCB layout review, and EDA tools - 熟悉Ethernet PHY、Switch IC，具PoE（IEEE 802.3af/at/bt）經驗尤佳 Knowledge of Ethernet PHY, switch ICs, and experience with PoE design is a strong advantage - 了解工規產品認證（IEC/EN/IEEE）及可靠度測試方法 Familiar with industrial standards (IEC/EN/IEEE) and reliability testing methodology - 良好的問題解決能力、跨部門溝通與團隊合作精神 Strong problem-solving, cross-functional communication, and teamwork skills

1. SSD及相關產品開發 2. 高速訊號完整性模擬 3. 驗證及量產測試設備開發 *熟悉並擅長運用ANSYS SIWAVE尤佳

你將在高速成長的網通產品事業單位中，扮演關鍵技術領導角色，負責Server主機板的核心設計與研發，推動創新並打造高效能解決方案。 職務內容: 1. Server主機板電路設計：主導高效能主機板的電路架構設計、原理圖繪製與Layout指導，確保設計品質與效能。 2. 技術領導與設計審查：擔任專案技術負責人，引領設計方向、進行技術審查與風險控管，確保專案技術決策正確。 3. 產品驗證與技術問題解決：負責產品功能驗證、測試與故障排除，持續提升產品穩定性與可靠度。 4. 商品化與設計優化：推動產品從設計到量產的轉化，並持續優化設計以提升品質、降低成本。 5. 專案管理與預算控管：掌握專案進度與資源分配，有效控管開發成本與預算，確保專案如期達標。 【我們在找的人】 一位對技術充滿熱情、具備深厚硬體設計經驗的工程師，渴望在Server領域發揮影響力。這個職務不只是執行者，更是技術的引領者，能夠在複雜挑戰中找到創新解法 ＊彈性工作時間，薪優福利佳，並備有新店/中和線交通車＊

To support our extraordinary teams who build great products and contribute to our growth, we're looking to add an EE/HW Director located in Taipei Design Site. Reporting to the Site Managing Director, The EE/HW Design Director performs the responsibility for leading an Electrical Engineering team that will design and build exciting, innovative products with a world class team. What a typical day looks like: • Successfully manage an Electrical Engineering team for PSU/BBU/ESS. • Manage team to design high power density AC/DC and DC/DC BBU (Battery Backup Unit) system for server, telecom, datacenter and industrial application. • Support to review RFI and RFQ and provide design proposal suggestion. • Provide PSU/BBU/ESS design solution to implement design review with customer • Experience in leading R&D team is Required. • Component standardization, optimize design and deep drive on cost reduction • Overall project responsibility in all aspects on EE design related- from project kick off to end of M.P. • Tolerance analysis & simulation and Issue solving The experience we are looking to add to our team: • Bachelor or above degree in electronics or electrical • 15+ years' experience for PSU, UPS, BBU design • Be highly passionate and interested in BBU development and capability of team work in multi-task environment • Solid understanding of software implementation/design experience is required. • Capability of independent research and working with new technologies is required. • Excellent written and verbal communications skills (in Mandarin and English) is required. • With strong sense of responsibility (be able to go on business trips, dispatch overseas is preferred) The information we collect: We may collect personal information that you choose to submit to us through the Website or otherwise provide to us. This may include your contact details; information provided in online questionnaires, feedback forms, or applications for employment; and information you provide such as CV/Resume. We will use your information for legitimate business purposes such as responding to comments or queries or answering questions; progressing applications for employment; allowing you to choose to share web content with others or; where you represent one of our customers or suppliers, administering the business relationship with that customer or supplier.

Supermicro is seeking an experienced system or product engineer for ethernet switch products. This role requires a strong switch product and factory knowledge, excellent communication skills between engineer and factory, and the ability to manage projects effectively. With program management experience is a plus. 1. Product Engineer Role – To coordinating production and building networking products. 2. Support and manage development stage system assembly and testing. Need to make sure and well know product each angel detail including manufacture process. 3. Collaborate cross-functionally with software/firmware, BMC/BIOS, HW, ME designers, and production team, to review product status and quality. 4. Lead and coordinate with cross-functional teams for technical issues resolution. 5. Control schedule and on time delivery 6. Improve system process for better quality and customer satisfaction. 7. Come out support document to make sure product successful.

1. 主動式電子掃描陣列 (相控陣列) 雷達系統之硬體電路設計。 2. 熟悉RF PCB Layout Guideline與PCBA廠商管理。 3. 理解SI/PI的觀念。

1.執行電路理論分析與驗證 2.電路建模與模擬分析驗證 3.製作設計工具與相關指引 4.電源轉換器(AC/DC, DC/DC )拓樸應用、設計與測試 5.磁性元件設計、評估與驗證 6.新產品平台開案及技術移轉

職務介紹： 做為一名硬體研發工程師，您將負責產品評估、硬體規劃及設計，Layout佈局及走線檢查，電子電路訊號量測及除錯系統設計，零件料號申請、BOM表建立與修改，以及專案技轉量產，品質分析等。主要產品為Intel /AMD Server, x86 Motherboard, ODM專案等產品開發。 職務匯報： 此職務會匯報於研發主管 主要工作內容： 1. 電子電路之研發，新產品設計，硬體除錯，良率提升等工作 2. 硬體線路及工程樣品製作 3. 研發新產品，改善現有產品，改善作業流程 4. 與客戶或公司的硬體部門的同仁共同研發或解決問題 5. 舊專案維護或改良，BOM變更與維護 人才需具備： 1.工作經驗：3年以上Server/PC/Notebook相關產業x86硬體研發經驗為佳 2.學歷要求：大學、碩士 3.科系要求：電機電子工程相關為佳 4.語文條件：英文(讀:中等、寫:中等) 5.擅長工具：擅長OrCAD, Allegro 等EDA軟體、Microsoft Office 軟體和示波器、電表等儀器之操作 6.工作技能：電子零件及電子線路解析能力 7.其他條件：細心、思考靈活，積極主動，良好的溝通能力，富有團隊合作精 神以及強烈的學習意願也是我們重視的條件。

從事無線通訊模組硬體開發、設計等工作 主要技能需求為擁有電子電路或通訊電子相關學能，對於高速訊號完整性處理與有線/無線通訊介面設計有經驗者

About Ubiquiti At Ubiquiti Inc., we create technology platforms for Businesses, Smart Homes, and Internet Service Providers, driven by our goal to connect everyone, everywhere. To date, Ubiquiti has shipped over 100 million devices worldwide, from ISP networking products to the next generation of IT solutions. Our growth is made possible by the dedicated team of hundreds behind the scenes. From software developers and product managers to designers and strategists, Team UI is driven to achieve our common goal: Rethinking IT. At Ubiquiti, you’ll heighten your potential and broaden your horizons, all while shaping the future of connectivity. Role Summary As a Design Quality Engineer, you will work within the Hardware & Firmware Design team. This will be a hands-on position to support all design validation and reliability aspects of design, development, and transfer to manufacturing. You will drive system validation activities for new product development, to implement design changes for sustaining products, to resolve technical issues for the manufacturing process, and to perform failure analysis for field returned products. In this role, you will: Responsibilities - Execute tests according to test plans and generate test reports during EVT/DVT builds. - SI & PI measurement during NPI phase or issue analysis. - Try to reproduce the customer’s issues and record the results for RD analysis - Develop an automatic test bench for long-term stress tests - Develop and maintain test environments to ensure enough test coverage and speed up testing. Minimum Qualifications - BS or MS in Engineering or related field - Over 3 years of working experience - Experience in hardware design or testing experience on power(PoE, Battery, Adapter), sensors(Touch LCM, ALS, Proximity, ToF, IR or mmWave) or wireless(WIFI, BT). - Familiar with test equipment, e.g., DC/AC power source, Multi-meter, Oscilloscope, DC loader, Power meter, Environment chamber, etc. - Knowing the Signal Integrity of low-speed interfaces such as I2C, SPI, UART, MIPI-LP, Ethernet MDI, etc. - Knowing Power Integrity, such as power sequence, ripple, efficiency, accuracy, line regulation, load regulation, dynamic response, etc. - Familiar with shell scripts and the command line on Linux or Android. - Good communication skills, Ex. Negotiation with PM/EE/FW engineers - Good documentation skills. Preferred Qualifications - Knowing the PCB layout for power, high-speed signal, analog signal, and RF signal. - Knowing the SI of high-speed signals such as ARM/MIPS CPU, DDR memory, USB, MIPI-HS, PCIE, SFI - Love to try and play new technology