「Lead Engineer (Power Solutions)」的相似工作

The Product Design Engineer for overpass solutions is mainly focusing on developing high speed cable solutions for front IO, near chip and Co-package chip applications. This position will highly engage with customer in early design stage, providing technical expertise on mechanical, cable route, and application hardware. Role and Responsibilities - Work closely with customer and their contract manufacturers to understand their design requirements, evaluate the challenging, and provide full workable interconnection solutions including connector interference, connector fitting structural, cable management, and application hardware. - Mechanical design and concepting in 3D model:  Front IO cage overpass solution.  Custom design for cage mechanism.  Work with thermal engineer to optimize thermal solution for customer.  Near chip overpass solutions:  Provide technical guidance to customer on product selection.  Design for different pairs configuration, connector fitting mechanism, cable output and management, and application hardware if needed.  Co-package copper overpass solutions:  Work with customer to complete the design that our connector can fit into customer’s package, including optimize connector layout in substrate, alignment feature and fitting mechanism, application hardware. - Verify if the design if it meets design objectives by varies engineering tools such as tolerance analysis, FEA, failure mode effect analysis… - Create complete cable assembly drawing including two ends solutions, wiring chart, cable pre-bending geometry(if needed). - Work with cross function team(mechanical, signal integrity, manufacturing) to ensure the design can be transited to mass production. - Create test plan and strategy for product in NPI status to verify the reliability, robustness in application before shipment.

The Application Development Engineer will participate in the design and development of unique and/or proprietary high-speed custom cable assemblies which will integrate into the customer’s system. These products are developed in response to specific customer application needs. Role & Responsibilities • Customer Engagement & Product Selection: o Work closely with customers to ensure they select the best cable solutions from our portfolio for their application. o Provide technical guidance on product selection, system architecture, and integration best practices. o Push back on customer design decisions when necessary to maintain optimal cable performance. o Share lessons learned, highlighting potential problem areas and best practices. • Custom Design & Engineering Documentation: o Mechanical design of custom cable configurations with detailed engineering drawings. o Develop and validate mockup systems with mock cables to demonstrate the best architecture. • System Architecture & Cable Management: o Help customers architect their compute trays for optimal hardware layout and cable routing. o Design cable management systems to ensure proper routing and performance. o Develop tools for cable installation and removal. • Technical Support & Knowledge Sharing: o Provide onsite support at customer and ODM locations during early build phases. o Conduct technical presentations and training sessions to coach customers on correct product usage. o Provide technical support to Sales and marketing personnel including technical training, presentations and customer visits. o Stay abreast of technological developments in the connector and interconnection industries. o Apply patent request when applicable to protect intellectual property. • Project Management & Collaboration: o Participate in multiple weekly conference calls with customers, ODMs, and internal teams throughout the development process (typically lasting a few months per project). o Manage 10-12 concurrent projects, ensuring timely support and execution. o Draw on the global engineering capabilities of other divisions for collaborative interconnect product development initiatives to serve a total interconnect solution to the customer. o Report regular project updates

Our customer’s success depends on our ability to solve their design challenges and provide interconnect solutions. We value our relationships with these companies and depend on our Field Application Engineers – FAE, to foster this ongoing technical partnership. As an Field Application Engineer, you will engage with the design teams at our key customers to provide technical expertise and solutions to meet their needs. This position combines design, engineering knowledge, and business techniques to drive the growth strategy. • Provide world class technical support to our customers (engineer to engineer) • Build technical relationships with our customer’s engineering teams • Engage customers early in design stage to achieve design win • Understand customers technical requirements and create concepts to solve customer’s interconnect challenges. • Differentiate our products and services above our competitors. • Provide design guidance to customers on innovative interconnect applications against their design requirements. • Understand our customers technical roadmaps to co-work with various business unit development activities to customer needs. • Some travel will be required to meet with customers within different China region.

• As a senior SI engineer you will lead the SI team to work with our customers, internal product development, product marketing, and sales teams. • Provide technical support to sales team for ACS high speed products and help customers to solve their interconnect challenges. • Assist in developing strategies to distinguish our products and solutions from those of our competitors. • Provide guidance and training to junior team members to enable them to effectively handle channel simulation across PCIe and Ethernet BUS, as well as optimize customers’ PCB layouts within the system budget. • Develop SI strategies for customer pinouts and routing challenges. • Design and evaluate next generation production test platforms. • Design, build, and measure circuit boards for measurement and verification of products. • Conduct research on the latest specifications of the committee's next-generation platform and provide integrated solutions for customers.

This role is responsible for supporting connector installation, inspection, and related application processes at customer sites and their contract manufacturers (CMs). This position requires technical understanding of the mechanical and electrical functions of the connector components and the related impact of installation variables. This position will interface closely with customers and their CM sites to develop an understanding of their application process and will work collaboratively to improve application quality and consistency. Strong communication, technical understanding, and interpersonal skills are critical in this role. • Work closely with customers and their contract manufacturers to evaluate and address connector challenges/concerns as they relate to the production process and functional integrity of the connector • Assist customers and CMs with new process development related to the connector and establishing proper connector application and handling processes • Observe and assess customer/CM processes and provide constructive feedback • Function as the “first responder” for customer/CM quality concerns, with ability to provide initial containment feedback and collect relevant data for distribution to the internal team • Work closely with internal development, NPI, and quality engineering teams to provide feedback for continuous improvement of connector quality • Receive feedback from customer/CMs on potential product and packaging improvements and evaluate improvement feasibility with internal team • Develop and evaluate custom application tooling as specified by the customer/CM • Update customer-accessible documentation related to connector application and inspection • Monitor CM production yields related to the connector and provide feedback/assistance for process improvement as needed • Perform quantitative analysis of quality concerns at customer/CM site • Coordinate procurement of necessary application tooling in preparation of initial customer system

1. Network products on board DC-DC power design, debug, evaluation, and verification 2. Responsible for circuit schematics design, PCB layout review, DC-DC DVT test and 2nd source verification...etc 3. Study new tools & instruments for design & validation

• As a SI engineer you will work with our internal Sr. SI and product development engineers of different Bus for customers’ inquiries. • Assist in optimizing customers’ pcb footprint and generate SI report of channel simulation. • Provide SI strategies for customer pinouts and routing challenges. • Help to measure customers’ circuit boards or in-house test fixtures for verification or debugging of our products.

• Interact / Interface w/Amphenol Commercial and High-Speed BU teams on material supply, buffer inventory, manage aging inventory, etc. requirements. • Interface/communicate via e-mails, F2F, phone conversations with key account customer on expedites, COS, part number shipment details, RFQ activities. • Integrate with Sales and BU Product Managers on key Design opportunities. • Integration w/Direct and ODM account teams on key metrics that will deliver growth. • Develop a successful Business Continuity Plan. • Integrate with all BUs to develop an annual cost down plan. • Support Business Management Meetings (QBR), and strategic annual business plans. • Integration with all Bus on key metrics • Market share monitor w/BU and Sales team • Align businesses to deliver customer forecasts. • Integrate and manage PCNs internally and externally w/customers • Manage customers’ Key Initiatives by working with Sales/FAE and BU’s. • Integrate with Amphenol’s BU team to support RBA, Resilinc, plant quals., etc

PRIMARY PURPOSE: We are seeking individuals who are proactive, humble, unafraid of learning new things, and have the potential for growth. The R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. You are responsible for designing and optimizing a product or create valuable or quality of product that will scale with Molex continued growth. As a Product Design Engineer, you will design and evaluate product, identify product requirements and contribute to research and project planning. DUTIES AND RESPONSIBILITIES: 1. Apply design, engineering, and technical expertise to influence cross-functionally and deliver reliable mass production components and solve time-sensitive problems. 2. Make significant contributions to design, development, and validation of different solutions (Specifically focused on the cooling solution for the cage and the design of the connectors.) 3. Manage the product design, provide guidance to team members, and communicate progress, and request feedback to prevent/remove roadblocks. 4. Anticipate and address product design issues or risks, analyze data, and validate product design to suggest or implement design improvements. 5. Conducts feasibility studies for new projects leveraging existing designs while also generating new designs and IP, drives consistency and thoroughness across portfolio. EDUCATION Required: Bachelor’s degree in mechanical engineering, Process Engineering, Manufacturing Engineering or equivalent practical experience. Required Experience and Skills:  8~10+ of work experience as a hands-on engineer.  Possesses thorough understanding of the product development process (Design Concept, EVT, DVT, PVT).  Demonstrated experience working with cross functional teams in English.  Engineering Design Software: NX (preferred), Creo, Pro/E, etc.  Knowledge in molding of different kind of materials, stamping, assembly process, product development process.  Ability to independently complete design and manage projects.  Understand thermal and mechanical of liquid cooling system.  Good problem-solving skill and able to deeply analyze testing failure mode.  Tolerance stack-up Analysis, review thermal, and reliability testing report. Desirable Requirements:  Experience in server or switch liquid cooling systems.  Experience in the high-speed connector industry.  Relevant knowledge of seal product design.  Experience with simulation or performance analysis of liquid cooling thermal solutions, precision machining, brazing (furnace, vacuum), molding (plastic & metal), soldering, stamping/assy, welding or sintering processes.  Passionate about design work and innovation, creating new products to address gaps in the industry.

網通產品電源開發設計 1. 負責AC/DC、DC/DC、PoE等相關電路的設計與應用 2. 電源電路的分析、調整及優化與相關測試驗證 3. 新方案及新元件導入的研究評估及測試 4. PCB佈線概念指導，電路除錯及量測...等

1.物料採購，負責與工廠、供應商協商、訂購、跟進交期和確保所需物料的及時供應。 2. 熟悉MRP流程，依 MRP 審核料況 。 3.庫存管理，監控和管理庫存水平，以確保所需物料的及時供應，同時最小化庫存成本。 4.物料分配和配送，確保物料按照不同客戶需要分配和配送到達到的相應的。 5.根據VMI備料，並配合客戶計畫及時跟進物料交貨 6.不良品的跟進與處理。 7.貨物跟蹤，安排物流運輸，並監督Forwarder派送進度。 8. 跨部門工作協調與問題處理

1. 執行新產品開發可行性評估及產品設計審查。 2. 問題分析與追蹤、工程樣品製作與工程/設計變更評估。 3. 產品零件材料選用BOM 手稿提供與確認的執行。 4. 解決產品之EMC 及surge 以及UL 安規等驗證問 5. 須有獨立開發電源經驗

1. 系統電源研發及測試 2. 電源電路設計、分析與改良 3. 新零件之尋找、測試 4. 熟悉Intel and AMD電源開發流程具獨立作業能力者佳

- Product development and promotion - Manage the program launch - Cost, pricing and margin management - Capacity planning management - Closely collaborate with customers, development/design/production team

Your Job Molex is seeking a Senior Mechanical Engineer to join our RF segment. In this role the successful candidate will be part of a world-class engineering team, contributing to the development of the RF connector and RF cable assembly. The successful candidate will be responsible for designing, implementing, and validating RF products that ensure the functionality, performance, and reliability of our RF product. The Senior Mechanical Engineer will use the lab. equipment, and hardware/software integration while collaborating closely with global, cross-functional teams to develop high-performance product solutions. Our Team - RF Product design What You Will Do - Create new products and modify old product based on customer request. - Work with QA and manufacturing engineers to solve quality issues - Perform EWR because of manufacturing improvement, functioning improvement, design change, and so on . - Work with manufacturing engineers to proceed cost reduction actions - Provides technical support to customers, suppliers, and inside product marketing personnel. - Support product test by coordinating with reliability lab (write test request, gather test sample, board etc. Who You Are (Basic Qualifications) - Bachelor’s degree in Mechanical engineering, or related field - 5+ years of experience in RF connector or general connector – components and assemblies. - Good verbal and written communication skills that demonstrate the ability to express complex technical concepts clearly and concisely –Mandarin and English. - Good interpersonal skills to work effectively with others and in a team. - Travel will be required as necessary. - Proficiency in solid modeling experience to generate 3D models & 2D drawings as well as Microsoft Word, Excel, and power point .

1.Cable related product line set up into assigned location 2.Drive the cost reduction to be competitive for expanding into new business 3.Develop and implement product business plan with market, industries and customers targets. 4.Gain new opportunities for industrial cable market , especially on ESS and Robot application , create the USD 20M revenue 5.Promote the CMIO product for industrial market segment

職務影響力 Gogoro 電池交換站結合了電池交換、人機介面、電池充放電、資訊整合及能源管理等功能，在這些功能的底層，需要各種不同規格的電源供應電路，支持各種功能運作。身為電源工程師，你將成為此電源電路開發的關鍵推手，運用不斷更新的電力電子材料、零件、電源拓樸、數位控制等資源及技術，在設計開端的制定規格階段起，考量應用最佳化，兼顧性能與量產性的目標進行設計，如期、如質、如預算完成電源相關專案開發，使能源網路性能與穩定性持續提升，在技術面創新，提供符合品牌精神的使用者體驗。 職務內容 1. 運用電子電機相關知識與原理，以電池交換站在能源網路為考量，設計各式AC-DC (交流-直流轉換器)、DC-DC (直流-直流轉換器)、DC-AC (直流-交流轉換器)、bidirectional converter (雙向轉換器) 等的完整電源架構。 2. 撰寫各種電源電路相關設計規格書，描述具體效能及設計細節、條件及測試規範，並考量系統面的規格影響，明確定義規格。 3. 擔任ODM (原廠委託設計代工)、JDM (共同開發)、OEM (代工生產) 專案之技術審查及技術支援窗口，充分分析外部合作廠商的設計能力，掌握開發時程，搭配文件審核，輔以必要的廠內測試，確保合作夥伴在產品開發技術面之品質及可靠度，建立共同成長的合作關係，引導外部夥伴在產品開發上取得與公司品牌精神、營運方針間的一致性。 4. 運用電子電機專業及分析解構能力處理技術相關問題，進行解析、追蹤，並提出改善建議，優化產品功能與使用體驗。 5. 研究能源相關領域技術面趨勢，探尋可強化品牌願景與精神之新技術及知識，構思應用及評估導入至現行商業模式。 需求條件 1. 電子電機或電力電子相關領域學歷，且具備電力系統與電子元件理論及應用相關知識。 2. 具備量測儀器設備基礎，如示波器、交流或直流電源供應器 (AC & DC Source)、電子負載、量測設備 (電表、資料紀錄器data recorder) 等。 3. 良好溝通技巧與協作能力，以分析性思維解決問題並提供結構性解決方案之能力。 4. 面對複雜或不明確情境，可化繁為簡，具備判斷事情優先次序的敏銳度及變革的行動力。 5. 對於工作與任務安排有彈性、可適應組織變化。 6. 具備中等的英文聽說讀寫能力。 7. 具備電源設計開發經驗、通訊介面技術如USB (通用序列匯流排 Universal Serial Bus)、CAN (控制器區域網路 Controller Area Network)、RS-485、乙太網路 (Ethernet) 等相關開發或應用技能與數位控制理論相關知識者優先安排面談。 8. 熟悉使用 PSIM 模擬軟體者，優先安排面談。

【職務內容】 1.NB相關電源應用 2.協助客戶產品相關設計、開發應用及生產 【需求條件】 1. 3年以上工作經驗 2.熟悉NB相關電源應用 3.熟悉Intel, AMD CPU相關測試 4.DC/DC Buck Converter相關經驗 5.積極認真，學習意願高，電子電機科系畢業，有RD經驗，有意往電源FAE職涯發展者，歡迎加入 【成為詮鼎的工作夥伴】 您將有機會參與集團的各項專案中，並與我們的專業團隊一起工作共同成長；我們提供具有競爭力的薪資和福利，良好的職場環境和發展機會，全心期待您的加入

1.承接專案電路設計/layout review/設計分析/問題分析 2.新電源技術評估可行性與技術導入 3.技術文件與驗證文件撰寫完成電源測試驗證 4.新電源技術調查與應用導入 5.產品研發時程及成本管理 6.部門團隊管理與培訓

Job Summary: This position's responsibilities include enhancing and debugging analog and digital IC products, developing reference circuits, writing datasheets and application/design notes, and providing application support for computing customers. Essential Functions: • Work with design engineers, field applications team, and marketing to enhance and debug analog and digital IC products. • Develop application reference circuits. • Write datasheets, application notes, design notes. • Provide application support for key customers and field application engineers Qualifications: • 4+ years of hands-on experience in switch mode power designs including DC/DC, AC/DC, or inverters. • MSEE or higher required • Fluent communication skills in English • Excellent writing and presentation skills • Previous experience in SI/PI analysis, computing system power design, power supply manufacturer, or power management IC company desired