「Product Engineer- Hsinchu」的相似工作

The Installation Engineer job is high profile and exciting opportunity for adventurous souls! Works under minimal direction from Management. Completes documented procedures and exercises judgment within defined procedures. Recommends changes to existing process and procedures. Primary responsibility is to strive for predictable Cycle Times and Warranty Starts for new tools installed and upgraded at our customer sites. Includes activities associated with setup, alignment, calibration, troubleshooting, diagnosing, and repairing of highly sophisticated capital equipment. Represents the company to the customer and assumes accountability for customer satisfaction with all installation/upgrade-associated activities. Assures operational quality of system equipment. Works directly with KLA regions and customers to verify new tool performance and transfer tool responsibility. Seeks warranty sign-off on newly installed tools Roles and Responsibilities • Installation of new tools in the field. Follows all procedures and provides a consistent result within specified cycle times. Achieves a predictable warranty start. • Evaluates, analyzes, diagnoses and fixes technical equipment problems related to installation. Can repair issues using standard procedures or innovate to resolve system problems which can have multiple causes. • Solving problems and repairs of sophisticated system level problems are based on Installation Engineer's technical knowledge and training. Installation Engineers seek help from Staff Engineers and Management when problems occur that may exceed knowledge, education and training. • Prepares field service reports and daily passdown on Installation progress and non-conformances. Contributes to post-activity Quality Feedback Report • Hold pre-installation meetings with the customer to scope customer unique requirements then create plans of action to measure and satisfy the unique needs. Execute plans of action and validate deliverables with the customer. • Meet with customer to facilitate warranty signoff after the activity is complete. • Acquires all vital international travel documents and manages their personal lives to be ready for domestic and occasional international travel. • Handles personal finances to prevent disruption to scheduled activities - even when traveling for extended periods. • Travels domestically and internationally by commercial transportation to customer sites. • Assists other engineers as necessary. Provides mentorship and technical assistance at customer sites. Can develop basic POAs. Provides phone and on-site support for junior engineers *Note: Only applications with *English resume* will be considered. *Please also apply through KLA Career page: https://careers.kla.com/

We are seeking a customer-focused, technically adept, and relationship-driven Customer Engagement Application Engineer to join our global team supporting KLA’s industry-leading wafer inspection and metrology solutions. In this front-line, customer-facing role, you will be the trusted technical advisor and strategic partner to our customers, driving product adoption, solving complex challenges, and building long-term relationships that fuel success. You will collaborate across functions to deliver high-impact solutions in the dynamic world of semiconductor manufacturing. Key Responsibilities: • Serve as the primary technical interface between KLA and customer, building trust and credibility through consistent, high-quality support. • Deliver applications support for KLA’s wafer inspection and metrology tools at customer fabrication facilities. • Lead customer engagements including product evaluations, new tool introductions, and drive competitions. • Drive customer success by conducting acceptance tests, recipe development, hands-on training, and pre-sales technical enablement. • Cultivate strong customer relationships by understanding their technical needs, aligning solutions, and ensuring satisfaction through onsite support . • Collaborate with customers and internal teams to co-author technical papers and present at global industry symposiums. • Develop and share Best Known Methods (BKMs), SOP ( Standard Operating Procedures ) materials, and technical documentation to empower global Field Applications teams. • Act as a cross-functional bridge, aligning customer feedback with engineering, sales, and marketing to drive continuous improvement. • Analyze complex technical issues, apply statistical methods, and deliver innovative, data-driven solutions. • Report regional insights and escalate field issues to product divisions, ensuring timely resolution and product evolution. Qualifications: • Master’s degree in Physics, Optics, Engineering, Material Science, or a related field; semiconductor process knowledge is a strong plus. • Proven experience in customer-facing technical roles, with a strong track record of building and maintaining customer relationships. • Demonstrated success in technical problem-solving, project execution, and cross-functional collaboration. • Willingness to work in semiconductor cleanroom environments. • Strong project management, leadership, and organizational skills. • Excellent presentation, communication, and interpersonal abilities. • Fluent in English, with the ability to communicate clearly via email, video calls, and in-person meetings. • Ability to manage multiple priorities in a fast-paced, global environment. Key Competencies: • Strong customer orientation with a passion for delivering value and building trust. • Advanced analytical and statistical thinking for data-driven decision-making. • Effective collaboration and communication across diverse teams and cultures. • High level of initiative, ownership, and accountability in driving results. • Resilience and adaptability in dynamic, high-pressure environments. • A proactive team player with a growth mindset and a drive for excellence.

KLA美商科磊致力於維護身心障礙者就業權益，歡迎領有身心障礙手冊或證明的夥伴投遞履歷，加入KLA！ The future is ours to create. Whether it’s a driverless car, VR experience, or factory robotics, we help turn theory into possibility. We help create technological devices and ideas that transform our future and shape our current life. We’re looking for Customer Service Engineers who contributes the support and provide unique customer value in the global electronics ecosystem. You will be able to learn the advanced mechatronic engineering and collaborate with leading customers across the globe, our expert teams of physicists, engineers, and problem-solvers design solutions that move the world forward. Roles and Responsibilities • Evaluates, analyzes, diagnoses and troubleshoots technical equipment problems via telephone or at customer site. Ensures equipment improves customer production. • Repairs of system level problems (which have multiple causes and for which no standard procedures exist) at customer sites. • Represents the company to the customer and assume accountability for customer happiness with service. • Assures operational quality of system equipment. Coordinates actions with customers to minimize down time. • Provides assistance to Installation Engineer in resolving problems. • Prepares fields service reports on customer support activity and provide documentation to other supporting functions on re-occurring problems. • Build positive relationship with customers and increase customer satisfaction by resolving sophisticated requests and issues. • Contribute to the Capturing, Re-use, Collaboration, and Improvement of knowledge using available systems • Develops and handles return materials authorization (RMA) processes for ensuring customer returns, exchanges, service and repairs are done with speed and accuracy and all client/customer service delivery issues are resolved. • Executes technical critical issues with detailed problem statement and pass-down to work with system engineering technical team in customer site. • Estimated travel is 20% once trained in the classroom as part of on-the-job training program. Although, much of the job responsibilities will be performed in the office or at the customer site supporting various projects and initiatives. In addition to problem diagnosis and resolution, other support duties will include characterization and support of customer demos and field projects. *Please visit and apply on our career website: https://kla.wd1.myworkdayjobs.com/zh-TW/Taiwan/job/Hsinchu-Taiwan/Customer-Service-Engineer-Hsinchu_2102329

KLA美商科磊致力於維護身心障礙者就業權益，歡迎領有身心障礙手冊或證明的夥伴投遞履歷，加入KLA！ Technical Support Engineer (TSE) is Responsible for providing assistance to Customer Support Engineers who are diagnosing, troubleshooting, and debugging complex optical, electro/mechanical, computer systems and/or software problems. TSEs respond to challenging issues where first-line product support has been unable to isolate or fix problems in malfunctioning equipment. Responsibilities include reporting design, reliability and maintenance problems, documenting and providing feedback to HQ Tech Support, and Sustaining Eng on CIP opportunities, preparing service and postmortem reports. TSEs may also be involved in customer installation, and upgrade of equipment as well as training of KLA and non KLA personnel. *Note: Only applications with *English resume* will be considered.

KLA美商科磊致力於維護身心障礙者就業權益，歡迎領有身心障礙手冊或證明的夥伴投遞履歷，加入KLA！ KLA是全球半導體製程控制的市場領導者，致力於提供先進製程控制的解決方案，持續開發和提供檢測、量測和資訊分析的技術服務和設備產品。 每項 KLA的設備產品都需要機械工程相關的人才！在KLA，機械相關科系畢業的你，可以使用問題分析和解決能力、基礎力學知識，和充滿創意的實務操作能力，為世界上最精密及最新的半導體機台提出技術解決方案。同時結合創新與熱情，與頂尖的半導體客戶合作，驅動未來的前瞻科技及突破製程控制的挑戰。 KLA尋找具備以下能力和志向的你： 1.機械工程相關科系包含：機械、動機、航太、 應力、船舶機電、自動化科技、車輛工程等 2.提供機台設備之整體技術支援及問題解決方案 3.具備與跨國團隊、跨部門合作及客戶端協作的中英文溝通能力 適合機械工程人才的熱門職缺包含： 1.客服工程師Customer Service Engineer：為機台設備進行保養、維護和排除機況。客服工程師像是偵探一樣，抽絲剝繭查出問題根源，於第一線支援客戶，持續維護機台運行狀況。 2.設備裝機工程師 Product Installation Engineer：世界各地只要有新機台導入，一定會有裝機工程師！裝機團隊負責設備的安裝及升級，與客服團隊密切合作，排除與解決硬體安裝的相關問題，以滿足客戶端的產能需求。 3.技術支援工程師 Technical Support Engineer：任何機台的技術難題，就交給技術支援團隊吧！技術支援工程師會與全球工程團隊合作，為複雜的機台問題提出進一步的解決方案，提供全球各地客服團隊強力的後援。 職能導向的學習發展資源 1.KLA歡迎無經驗的新鮮人：我們提供專業技術培訓認證課程，積極落實在職訓練(On-the-Job Training)，培育你對先進精密機台的專業知識與技能。 2.你的成長就是KLA的成長：KLA提供你軟實力培訓資源，協助你培養日常工作中需要的溝通、簡報、專案管理和自我領導等能力，以及深化客戶服務的品質。 3.KLA致力營造多元及包容的職場文化：KLA有完整開放的晉升管道，有多元發展和探索的機會，能滿足你不斷成長的職涯規劃。 歡迎機械工程相關科系的應屆畢業生、社會新鮮人或半導體專業人才投遞履歷。收到合適履歷後，我們將會盡快與你聯繫，為你媒合最契合的職缺。

We are seeking a customer-focused, technically adept, and relationship-driven Customer Engagement Application Engineer to join our global team supporting KLA’s industry-leading wafer inspection and metrology solutions. In this front-line, customer-facing role, you will be the trusted technical advisor and strategic partner to our customers, driving product adoption, solving complex challenges, and building long-term relationships that fuel success. You will collaborate across functions to deliver high-impact solutions in the dynamic world of semiconductor manufacturing. Key Responsibilities: • Serve as the primary technical interface between KLA and customer, building trust and credibility through consistent, high-quality support. • Deliver applications support for KLA’s wafer inspection and metrology tools at customer fabrication facilities. • Lead customer engagements including product evaluations, new tool introductions, and drive competitions. • Drive customer success by conducting acceptance tests, recipe development, hands-on training, and pre-sales technical enablement. • Cultivate strong customer relationships by understanding their technical needs, aligning solutions, and ensuring satisfaction through onsite support . • Collaborate with customers and internal teams to co-author technical papers and present at global industry symposiums. • Develop and share Best Known Methods (BKMs), SOP ( Standard Operating Procedures ) materials, and technical documentation to empower global Field Applications teams. • Act as a cross-functional bridge, aligning customer feedback with engineering, sales, and marketing to drive continuous improvement. • Analyze complex technical issues, apply statistical methods, and deliver innovative, data-driven solutions. • Report regional insights and escalate field issues to product divisions, ensuring timely resolution and product evolution. Qualifications: • Master’s degree in Physics, Optics, Engineering, Material Science, or a related field; semiconductor process knowledge is a strong plus. • Proven experience in customer-facing technical roles, with a strong track record of building and maintaining customer relationships. • Demonstrated success in technical problem-solving, project execution, and cross-functional collaboration. • Willingness to work in semiconductor cleanroom environments. • Strong project management, leadership, and organizational skills. • Excellent presentation, communication, and interpersonal abilities. • Fluent in English, with the ability to communicate clearly via email, video calls, and in-person meetings. • Ability to manage multiple priorities in a fast-paced, global environment. Key Competencies: • Strong customer orientation with a passion for delivering value and building trust. • Advanced analytical and statistical thinking for data-driven decision-making. • Effective collaboration and communication across diverse teams and cultures. • High level of initiative, ownership, and accountability in driving results. • Resilience and adaptability in dynamic, high-pressure environments. • A proactive team player with a growth mindset and a drive for excellence. Note: Only applications with *English resume* will be considered. Please also apply through KLA Career page: https://careers.kla.com/

Please apply this role through https://careers.synopsys.com/job/hsinchu/r-and-d-engineering-sr-staff-engineer/44408/84900058096 Synopsys is looking for motivated Product Engineer to help design, develop and test state of the art Static Timing, Characterization and Library modelling tools. The primary focus of the Product Engineer is closely working with R&D team, to influence technologies/solution roadmaps and provide R&D team with accurate input from Field AEs, helping them focus on the most critical design challenges and help define solutions to critical problems. The engineer will work closely with Field AEs, ensuring overall consistency of end-to-end design and analysis flow to meet customer needs. The engineer will also work with Sales and Marketing teams to find and develop new markets, drive new tool evaluations and help customers with the adoption and continuous usage of Static Timing, Characterization and Library Modelling, thus enabling Chip Design customers achieve best Timing, Power and Characterization Goals. Synopsys’ existing and forthcoming tools offer an advanced transistor-level static timing characterization and library modelling solution that addresses the existing and emerging challenges in custom and memory design. They offer predictability and improved productivity to designers. Their concurrent timing, SI features and advanced variation aware analysis enables designers to accurately and quickly identify design issues early-on and avoid expensive late-finding of problems in silicon. Main responsibilities: • Drive new products and new product features that exceed customer needs. • Work with RnD to enable timely implementation of new products and features, and important bug fixes. • Provide consultation to prospective users and/or product capability assessment and validation. • Provide tool trainings to customers and Field AEs. • Provides technical expertise to sales staff through sales presentations and product demonstrations. • Assists the sales staff in assessing potential application of company products to meet customer needs and preparing detailed product specifications for the development and implementation of customer applications/solutions. Requirements: We are looking for an innovative, motivated, and dependable person, with at least BS degree and 8+ years of recent hands-on experience including: · Exceptional expertise in transistor-level analysis and debug circuit level issues for SRAM, RF, ROM memories and Standard Cells. · Good exposure to static timing concepts and CMOS engineering fundamentals. · Good knowledge of TCL and or other scripting languages. · Very good communication, social and leadership skills. Plus: · NanoTime or PrimeLib experience highly desirable.

Responsibilities Process Technician will actively support process development and other R&D work carried out by Lam Research team at Taiwan Technology Center (TTC). The work will be performed in TTC cleanroom and will involve operation of various process and metrology tools used for device manufacturing which may include processes such as sample preparation, plasma etch, wet clean, associated metrology and inspection. 1. Supports Process Engineers in routine preparation for wafer tests, data collection and sample submissions 2. Operates etch, wet clean and metrology processing equipment with use of recipes defined by engineering team 3. Provides technical assistance to process development carried out by R&D team 4. Processes test runs and prepares records, charts, and schematics of results for presentation to engineering

【產品線描述】 Smart TV Solutions：提供TVSoC、MEMC/FRC及面板相關顯示裝置的控制晶片 ASIC Solutions：提供智能手機、智能電視、電競螢幕、AI Server等產品各種ASIC(包含CoWoS/ChipLet平台)解決方案 【工作說明】 先進封裝 Package/substrate 設計工程師，主要規畫 SoC IC 封裝，整合開發驗証的 EVB 設計。 1. 負責IC floor plan, IO pin mux 及 PAD location規劃。 2. 負責 ball map 規畫, Substrate基板設計佈局。 3. 電路板開發 (EVB) 設計與除錯 【必要條件】 1. 須熟悉OrCAD, PADS and Cadence Allegro 等應用軟體。 2. 具備PCB/Substrate design及傳輸線理論等相關知識。 3. 具備電子電路，Power 架構設計， SI/PI概念。 4. 具一年以上BGA封裝設計, 熟悉各種類型之封裝及基板設計, 有 CoWoS 封裝設計經驗尤佳。 5 積極、跨部門溝通協調能力、有責任感 。

【請同時至科林研發官方網站投遞】 此職缺履歷登錄網址 https://reurl.cc/gD31KL Technical 1.Responsible for completion of process support and installation of Lam equipment at customer sites. This includes evaluation and documentation of process outputs of hardware modifications/upgrades to existing systems. 2. Setup and complete experiments, collect data and generate reports for both internal and external distribution. 3. Design and complete DOE (Design of Experiments) evaluations to characterize process window for new installations or Lam recommended field hardware modifications/ upgrades. 4.Develop new processes for small variants to existing customer applications. 5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution. 6. Work with senior engineers and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues/ challenges. 7. May develop new processes for small variants to existing customer applications. 8. May recommend / initiate escalations and quality investigations. 9. Present technical and marketing materials to a high standard. 10. Any other duties as assigned by the immediate supervisor. Customer Relation 1. Develop good customer relations during start-up and trouble-shooting; Work closely with customer to understand customer issues and demands. 2. Professionally represent the company to the customer. 3.Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified. 4. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc.) in good working condition, accounted for and secure. 5. Can support process projects and manage customer and product group to drive to closure. *請檢附英文履歷**請載明多益成績*

The future is ours to create. Whether it’s a driverless car, VR experience, or factory robotics, we help turn theory into possibility. We help create technological devices and ideas that transform our future and shape our current life. We’re looking for Customer Service Engineers who contributes the support and provide unique customer value in the global electronics ecosystem. You will be able to learn the advanced mechatronic engineering and collaborate with leading customers across the globe, our expert teams of physicists, engineers, and problem-solvers design solutions that move the world forward. Roles and Responsibilities • Evaluates, analyzes, diagnoses and troubleshoots technical equipment problems via telephone or at customer site. Ensures equipment improves customer production. • Repairs of system level problems (which have multiple causes and for which no standard procedures exist) at customer sites. • Represents the company to the customer and assume accountability for customer happiness with service. • Assures operational quality of system equipment. Coordinates actions with customers to minimize down time. • Provides assistance to Installation Engineer in resolving problems. • Prepares fields service reports on customer support activity and provide documentation to other supporting functions on re-occurring problems. • Build positive relationship with customers and increase customer satisfaction by resolving sophisticated requests and issues. • Contribute to the Capturing, Re-use, Collaboration, and Improvement of knowledge using available systems • Develops and handles return materials authorization (RMA) processes for ensuring customer returns, exchanges, service and repairs are done with speed and accuracy and all client/customer service delivery issues are resolved. • Executes technical critical issues with detailed problem statement and pass-down to work with system engineering technical team in customer site. • Estimated travel is 20% once trained in the classroom as part of on-the-job training program. Although, much of the job responsibilities will be performed in the office or at the customer site supporting various projects and initiatives. In addition to problem diagnosis and resolution, other support duties will include characterization and support of customer demos and field projects.

1. To improve device yield &CIP in order to meet customer request and customer service. 2. Identify and solve process and device problems. 3. Support for customer visit and audit.

一、【日本滋賀-CAM工程師】 ◆薪資： 月額基本給：25万円~35万円 (年收約400万円~620万円) ◆工作內容： ・使用CAD/CAM系統製作機械零件及零件加工數據 ・使用銑床和NC Router進行切削加工、設計與製作加工治具以及維護管理 ・規劃和執行多部件的組裝工作、負責加工過程中的檢查和品質監控 ・其他主管交辦事項 ◆需求條件： ・日本語N1 ・NC program、CAM的基本知識 ・具備操作MasterCAM的技能尤佳 二、【日本滋賀-品質管理&技術口譯】 ◆薪資： 月額基本給：22.6万円~ (年收約335万円~460万円) ◆工作內容： ・技術相關的日語口譯與文件翻譯 ・新產品開發與導入時的品質檢討與計畫制定 ・製造流程與檢查標準的管理 ・異常或客訴時的原因分析、對策提出與客戶應對 ・技術文件（規格書、作業標準等）的管理 ・與海外據點合作，推動供應商品質改善 ◆需求條件： ・日本語N2以上/商用英文能力 ・具備切削加工圖面的專業知識且進行日語→中文/英文技術翻譯者 三、【泰國-品質管理&技術口譯】 ◆薪資： 月額： 約THB100,000(包含住宿、各項補助在內) ◆工作內容： ・ 負責確認日本及泰國國內客戶的訂單內容（規格）、進行價格協商與交期調整。 ・ 與泰國國內供應商進行談判與協調，並執行品質管理相關業務。 ※ 根據客戶提供的圖面，與供應商協商生產規格，從試產到量產的導入、品質管理與品質保證。 ・ 推動成本降低活動與業務改善活動。 ◆需求條件： ・了解切削加工圖面 ・ 具備機電一體化領域的業務經驗 ・ 具備日文能力N2以上&商用英文能力 ・可接受外派至泰國 四、【日本大阪-供應鏈管理專員<儲備幹部>】 ◆薪資： 月額基本給:35 万円~45 万円(年収:580 万円~700 万円) ◆工作內容： ・確認客戶訂單規格、價格與交期，跟進試作至量產，多數為重複訂單。 ・與國內外供應商確認發注內容，協調價格與交期，掌握整體供應鏈流程。 ・處理各項客戶需求與問題，保持良好聯繫（拜訪、線上會議、郵件、電話）。 ◆需求條件： ・具備日文能力N2以上&商用英文能力 ・具有製造業或商社工作經驗 ・具有海外供應商管理經驗 ・能閱讀切削加工相關圖面 五、【日本大阪-海外業務<儲備幹部>】 ◆薪資： 月額基本給:29万円~40万円(年収:500 万円~630万円) ◆工作內容： ・負責功能性材料的海外銷售（既有客戶維護與新規開發 主要市場涵蓋中國、台灣、東南亞、印度等。 ・與供應商協調價格與交期，執行出口安排及物流成本管理。 ・管理銷售額與利潤，並進行績效報告。 ◆需求條件： ・具備日文能力N2以上&商用英文能力

協助客戶端製程之開發、評價作業，主要之工作內容包括 1. 客戶對應 2. 設備良率的改善與提昇 3. 客戶端現場(無塵室內)製程Trouble shooting 4. 須具備外語溝通能力，與日本總公司窗口聯繫 5. 依工作需求配合支援國外長期/短期出差(如:日本) 6. 需配合加班或輪班(新裝機或專案才會需要短期輪班，常態以加班為主) 7. 公司其他據點支援 8. 遵守客戶端工安規定 9. 具半導體設備製程經驗尤佳

由於先進製程與高整合度晶片需要較長的研發時間及高製造成本，DV (Design Verification) 已成為聯發科技晶片開發流程中不可或缺的一環。 CDG DV部門負責開發與執行最高整合度 Smartphone，TV與ASIC驗證工程。 內容包含:整合型驗證環境開發，大數據分析與效能改善，BUS Fabric / EMI (External memory interface ) / Low power functions 驗證規劃及執行。 工作中需要設計及精進Verification plan/methodology/bench，對SOC系統有整體而深入的了解。 利用最新EDA tool and concept來完成你的驗證計畫。 工作地點:新竹/台北

Overview: Join us as a Process Integration Engineer in MOSFET team! If you’re interested in foundry management, product initiatives, and platform migration, you might be the perfect fit to this position. Applicants should hold an advanced degree, possessing expertise in power devices, quality control acumen, and strong communication skills. Key Responsibilities: • Engage with foundry partners to ensure process stability and adhering to stringent product release criteria. • Direct new tape-outs, oversee mask evaluations, and establish efficient process flows in collaboration with R&D for device and platform advancements. • Conduct pivotal failure analyses, such as PFA and EFA, and make necessary adjustments to optimize process conditions. • Guide and manage the transition of platforms to new foundry sites, balancing process adaptation, risk management, and yield quality. • Response promptly to customer’s feedback, lead root cause investigations, and collaborate with the SQE team to implement corrective measures. • Accomplish additional tasks delegated by the supervisor. Qualifications: • A Master degree in EE, Physics, or a related field. • Solid experience in power devices, especially on UMOS, SGT, LDMOS, MLSJ, GaN, and SiC devices. • Proficiency in quality control methodologies, such as Six Sigma, 8D, control plans, and FMEA. • In-depth knowledge of foundry operations and semiconductor fabrication processes. • Strong communication skills, especially in English. • Familiarity with semiconductor simulation tools is a plus.

As a Photochemical Front-End Supplier Quality Engineering (SQE) Manager, you will be responsible for supporting Material Category Leads in defining the strategy, executing plans, and driving excursion prevention programs to develop suppliers through continuous improvement programs. Your work will play a vital role in mitigating supplier Quality issues and consistently improving the overall Quality of Micron's products. Your role extends beyond individual contributions and involves collaborative efforts with key stakeholders. You will work closely with Global Quality, Global Procurement, Operational Central Team (OCT), Operations, Facility, and Product Engineering, fostering a sense of camaraderie and shared responsibility. You will also significantly impact our supplier relationships. You will support Supplier Performance Reviews, ensure suppliers receive timely and accurate feedback based on consistent metrics, and develop a continuous improvement plan. The following are examples of experiences to help prepare a team member for this position: • 5–10 years of experience in the semiconductor industry or in a high-volume manufacturing environment is highly advantageous. • Foundational understanding of Photochemical materials and their applications in wafer manufacturing processes. • Basic familiarity with ISO 9001 and IATF 16949 quality management system standards. • Proficient in Microsoft Office Suite, including PowerPoint, Word, Excel, and OneNote. • Demonstrated ability to work independently with minimal supervision in a dynamic and fast-paced environment. • Strong analytical capabilities, with hands-on experience in: o Measurement System Analysis (MSA) and calibration o Statistical Process Control and FMEA o Problem-solving methodologies o Quality management systems • Effective communicator with the ability to engage stakeholders at all levels, both internally and externally.

We are seeking a highly skilled Product Engineer (PE) to join our dynamic team. As a Product Engineer, you will be responsible for maintaining the reliability, performance, and scalability of our distributed edge infrastructure. You will ensure the smooth operation of systems and services deployed at edge locations, balancing the unique challenges of low-latency, bandwidth-constrained, and IT environments. The ideal candidate will have expertise in cloud-native technologies, edge computing frameworks, and infrastructure automation, with a strong focus on reliability and security. Responsibilities: • Implement, and maintain scalable, fault-tolerant, and highly available edge infrastructure. • Automate the provisioning and management of edge computing environments using Infrastructure as Code (IaC) tools like Terraform or Ansible. • Ensure edge systems are resilient to node failures, network disruptions, and hardware issues by designing and implementing redundancy, failover, and disaster recovery strategies. • Monitor and troubleshoot performance and reliability issues across distributed edge nodes using tools like Prometheus and Grafana. • Optimize applications for low-latency, bandwidth-constrained environments, working with development teams to ensure efficient resource usage. • Implement and enforce security best practices for edge devices, including device authentication, data encryption, and regular security updates. • Collaborate with software engineers, network engineers, and operations teams to optimize the performance and reliability of the edge network. • Set up robust monitoring and alerting systems for real-time tracking of edge system performance and incidents. • Lead incident response and root cause analysis for failures within the edge network, ensuring continuous improvement through postmortems. • Stay up to date with the latest edge computing technologies, tools, and best practices to continuously enhance system performance.

1. 半導體相關製程實務經驗 2. 與客戶進行研發項目的流程開發 3. 處理演示請求以促進設備銷售 4. 技術介紹的銷售支持 5. 與總部溝通以進行持續改進計劃 6. 其他公司交付任務 7. 需具備良好英文溝通能力 公司參考網頁: www.evgroup.com

工作概覽： 參與CMOS平台製程開發、元件設計與電性優化，支持新產品導入、製程整合與技術創新，為特殊應用產品提供完整的製程與元件解決方案。 主要職責： • 負責0.35um CMOS製程模組與整合開發。 • 參與元件(如MOS、HVLDMOS、電容、電阻等)之設計與TCAD模擬驗證。 • 建立元件模型(SPICE/LPE) 與電性分析，協助PDK開發。 • 協同設計團隊進行元件規格定義與效能驗證。 • 支援新產品導入、製程異常分析與良率改善。 資格條件: • 熟悉0.35um CMOS製程平台。 • 具元件設計、TCAD模擬或SPICE建模經驗者尤佳。 • 具備製程整合、電性量測與數據分析能力。