104工作快找APP

面試通知不漏接

立即安裝APP

「Thermal camera 資深高級工程師」的相似工作

大根光學工業股份有限公司
共501筆
精選
台中市梧棲區5年以上專科以上
【Introduction】 Our client is a prominent Japanese company that operates primarily in the field engineering, procurement, and construction (EPC) for various industries. 【Responsibilities】 1. Communicate with the PCC Manager/Engineer and execute tasks safely and efficiently. 2. Perform PCC activities (e.g., air blowing, water flushing, pump/compressor run-in, tightness tests, inerting) as per procedures. 3. Participate in plant start-up and daily operations following operating procedures. 4. Conduct periodic tests and inspections to ensure process and safety equipment are in proper condition. 5. Complete shift logbooks, report anomalies, and generate work orders and shutdown reports. 6. Assist in troubleshooting and recommend improvements for safety and efficiency. 7. Operate and inspect field equipment, perform minor maintenance, and conduct chemical sampling/analysis. 8. Receive and prepare chemical batches required for processes. 9. Monitor and control plant operations via DCS, maintaining radio communication with field staff. 10. Adjust operating parameters, coordinate equipment isolation, and resume operations post-maintenance. 11. Act as the main communication point during emergencies between PCC Manager/Engineer and field operators. 【Requirements】 1. Language Skills: Fluent in Chinese and English 2. Experience: Minimum 5 years of commissioning and operation experience in hydrocarbon gas or oil plant facilities with similar responsibilities. 3. Technical Skills: Strong understanding of plant commissioning processes, troubleshooting, and equipment operation in oil and gas or related industries. 4. Coordination Ability: Ability to collaborate effectively with multidisciplinary teams and maintain accurate operational documentation.
應徵
10/16
台中市西屯區2年以上大學以上
Introduction to the job Do you like challenges and do you want to work in a fast pacing supply chain environment to support some of the biggest semiconductor companies worldwide? Are you familiar with Logistics Operations and like to managing urgent demands on a daily basis?  If this sounds like you and if you have a strong customer oriented mindset, here is your mission. Role and responsibilities For our Global Operations Center in Taiwan we are searching for Supply Chain Professionals. You fulfill the demand of our customers for spare parts and tools for their maintenance activities on some of the most complex machines in the right quantity and at the right time & cost. Time is of the essence to ensure a seamless production of our customers without interruptions on our machines. -Handling of urgent material requests from worldwide customers in a rolling 24/7 shift system with the right customer focus, while meeting all milestones related to communication and execution -Monitoring of worldwide shipments  -Ability to resolve complex issues and drive improvements to further optimize processes -Ability to support escalations and provide communication proposals for review -Constructive and reliable communication with worldwide stakeholders from all departments within ASML -This position requires shift work. Education and Experience Bachelor's Degree in related subject i.e. Supply Chain Management, Information Science, Engineering etc. preferred -Minimum 1 year of relevant experience in an international company, semiconductor industry is preferred -A tactical thinker with strong interpersonal and communication skills -Analytical thinking and ability to organize and prioritize workload Skills Working at the cutting edge of tech, you’ll always have new challenges and new problems to solve – and working together is the only way to do that. You won’t work in a silo. Instead, you’ll be part of a creative, dynamic work environment where you’ll collaborate with supportive colleagues.  There is always space for creative and unique points of view. You’ll have the flexibility and trust to choose how best to tackle tasks and solve problems. To thrive in this job, you’ll need the following skills: -Stress-resistant; act under high pressure -Flexible; willing to go the extra mile for the customer -Excellent professional communication in English, written and oral -Drive for results; does not stop until solution has been found, even when obstacles arise -Team player -Change management competencies -Convincing, pro-active and “can do” mentality -Cultural awareness -Experience with ERP system(s), SAP R/3 knowledge preferred -Ability to prioritize Diversity and inclusion ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions.
應徵
10/13
台中市梧棲區經歷不拘大學
❖ 限定以下學校招聘專區❖ 碩士起薪54K ❖ (需符合相關科系) 【國立臺灣大學】【國立清華大學】 【國立成功大學】【國立交通大學】 【國立中興大學】【國立中央大學】 【國立臺灣科技大學】【國立臺北科技大學】 【光學產業領導品牌】 ★ 薪優福利多!享年終獎金、留任獎金,符合資格可申請交通/租屋補助 ★ 安心好食在!員工自助餐廳補助,多元美食任你挑選 ★ 暖心好照顧!提供員工制服、定期健康檢查及特約幼兒園托嬰 【工作內容】 ◆ 研發機構工程師 1.光學鏡頭產品開發設計 2.新機種試作驗證及量產導入 3.電腦輔助模擬(CAE)、新材料研究與試作 4.問題解析與對策 ◆ 光學設計工程師 1.成像光學設計與分析 2.非成像光學模擬與分析 3.協助試作問題點解析與對策 4.專利研究與申請
應徵
10/15
Molex Taiwan Ltd._台灣莫仕股份有限公司電腦及其週邊設備製造業
台北市信義區8年以上大學
PRIMARY PURPOSE: We are seeking individuals who are proactive, humble, unafraid of learning new things, and have the potential for growth. The R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. You are responsible for designing and optimizing a product or create valuable or quality of product that will scale with Molex continued growth. As a Product Design Engineer, you will design and evaluate product, identify product requirements and contribute to research and project planning. DUTIES AND RESPONSIBILITIES: 1. Apply design, engineering, and technical expertise to influence cross-functionally and deliver reliable mass production components and solve time-sensitive problems. 2. Make significant contributions to design, development, and validation of different solutions (Specifically focused on the cooling solution for the cage and the design of the connectors.) 3. Manage the product design, provide guidance to team members, and communicate progress, and request feedback to prevent/remove roadblocks. 4. Anticipate and address product design issues or risks, analyze data, and validate product design to suggest or implement design improvements. 5. Conducts feasibility studies for new projects leveraging existing designs while also generating new designs and IP, drives consistency and thoroughness across portfolio. EDUCATION Required: Bachelor’s degree in mechanical engineering, Process Engineering, Manufacturing Engineering or equivalent practical experience. Required Experience and Skills:  8~10+ of work experience as a hands-on engineer.  Possesses thorough understanding of the product development process (Design Concept, EVT, DVT, PVT).  Demonstrated experience working with cross functional teams in English.  Engineering Design Software: NX (preferred), Creo, Pro/E, etc.  Knowledge in molding of different kind of materials, stamping, assembly process, product development process.  Ability to independently complete design and manage projects.  Understand thermal and mechanical of liquid cooling system.  Good problem-solving skill and able to deeply analyze testing failure mode.  Tolerance stack-up Analysis, review thermal, and reliability testing report. Desirable Requirements:  Experience in server or switch liquid cooling systems.  Experience in the high-speed connector industry.  Relevant knowledge of seal product design.  Experience with simulation or performance analysis of liquid cooling thermal solutions, precision machining, brazing (furnace, vacuum), molding (plastic & metal), soldering, stamping/assy, welding or sintering processes.  Passionate about design work and innovation, creating new products to address gaps in the industry.
應徵
10/16
台中市南屯區5年以上大學以上
1. 供應商年度稽核與新供應商評鑑。 2. 供應商品質管制與管理輔導。 3. 供應商品質問題部門的溝通、協調解決與追蹤。 4. 進料檢驗規範標準的建立與維護。 5. 管理原物料的進料品質,對來料異常的情況進行確認、處理、改善及成效的確認。 6. 管理來自產線或客訴與來料相關的品質問題,包括異常原因的分析與改善。 7. 監控原物料的良率情況,改善原物料品質管控流程。 8. 原物料品質改善專案的規劃、執行與管理。 9. 主管交辦工作事項。
應徵
10/13
雙餘實業股份有限公司自行車及其零件製造業
台中市北屯區經歷不拘專科以上
1. 產品外觀、機構、設計開發 2. 產品創意發想、提案、專利評估申請 3. 產品零件圖繪製、發行、維護 4. 產品可行性評估、開發研究、制訂產品標準及測試規劃 5. 制定新機型及依客戶需求修改樣式,具繪圖、設計、導入試量產之能力 6. 支援工廠新產導入、順利量產 7. 設計變更、產品優化及維護相關圖檔 8. 新產品開發、功能確認、新開發零件、檢驗、確認、發行部品確認書 *具健身器材開發經驗者尤佳
應徵
10/16
台中市南屯區經歷不拘大學
1. 新產品/新材料/新製程導入,特殊需求產品生產管控 2. 新產品設計審核,失效模式分析,製程改善,產品良率分析與改善,降低成本研究 3. Process flow / Control plan / PFMEA彙總與管理 4. 生產工治具需求彙總 5. 各部門間工作溝通協調 6. 應對客戶製程問題相關事項 7. 主管交辦事項
應徵
10/16
台中市西屯區1年以上大學以上
在這裡,你不只是執行設計,而是從 0 到 1 打造產品的關鍵推手。 我們在尋找:不只想趕稿,更想在設計路上持續成長的你。 【工作內容】 1. Web 產品全方位設計:涵蓋流程規劃、介面設計、互動設計、視覺設計與維護。 2. 設計規範建立:協助制定並維護規範,確保產品設計一致性與可擴展性。 3. 跨團隊溝通協作:依 Scrum 流程與跨職能團隊合作,提升設計完整度與品質。 4. 使用者導向:主動蒐集利益關係人回饋,靈活應對需求變動,兼顧商業價值與使用者體驗。 5. 設計優化:製作提案、追蹤成果並持續改進,必要時支援國內外出差。 【工作佔比】(實際情況視團隊安排而訂) a. 80% UX/UI Design: 包含使用者行為數據分析、產品功能設計、資訊架構規劃、製作 User Flows、Wireframes、Mockups 及 Prototypes 等。 b. 10% Visual design: 包含 Key Visuals 、Banner 設計等。 c. 10% Others: 技能學習、跨部門協作、設計師相關行政支援等 【職務必備條件】 1. 具備後台管理網站規劃與互動介面設計經驗,熟悉 UI/UX 設計流程,重視細節與一致性。 2. 以使用者為中心進行體驗設計,能兼顧實際執行與商業可行性。 3. 具備視覺設計美感,能進行影像處理,並具 HTML5 / CSS3 與跨平台響應式設計基礎。 4. 懷抱熱情,主動學習新知識與技術,勇於挑戰並從成功與失敗中成長。 5. 具備同理心與開放心態,展現責任感與良好團隊合作能力。 6. 具備獨立思考與清晰表達能力,並能提供完整作品集(含設計流程與成果)。 【使用工具】 1. Figma, Photoshop, Illustrator 2. Google Docs, Jira, Confluence, Miro 3. GA4, GTM, Hotjar
應徵
10/14
久鼎金屬實業股份有限公司自行車及其零件製造業
台中市西屯區2年以上大學以上
1. 負責電動滑板車與電動自行車零組件整合設計及整車結構開發設計,包含車架折疊、避震系統、轉向系統相關之機構設計開發與結構評估。 2. 熟悉新產品開發流程,負責產品結構設計、材料選用、開發進度與品質、成本的控制管理至成功試產轉量產。亦負責產品設計變更的執行與追蹤。 3. 負責新產品機構相關之成本分析、估算,以符合相關標準與規範。機構相關新技術開發與專利研究、專利提案。 4. 負責新產品開發中之工程圖面、技術資料建檔、設計檢驗標準文件制定管理,並需熟悉公差設置及圖面標注方式。 5. 負責新產品機構測項測試驗證後問題的改善及優化。
應徵
10/17
台中市大雅區3年以上大學
崗位職責: 1、熟悉3C行業塑膠射出產品新產品開發、結構設計流程,具有結構分析能力; 2、負責塑膠件產品開發、尺寸分析、製程分析; 4、負責模具開模試模檢討, DFM檢討,FA報告編寫; 5、負責塑膠射出製程開發(注塑成型/鐳雕/噴漆/組裝/印刷/CNC/組裝/噴漆等); 6、直接對接客戶,討論注塑件產品技術,參數等; 7、懂得塑膠模具、塑膠射出成型特性者優先。
應徵
10/14
星歐光學股份有限公司醫療器材製造業
台中市南屯區經歷不拘大學
1.自動化設備開發 2.機構設計 3.光機電整合設計 4.具有PLC能力者佳
應徵
10/15
台灣恩傑科技股份有限公司電腦及其週邊設備製造業
新北市板橋區8年以上大學
NZXT is seeking a highly motivated Thermal Engineer to help develop best in class, innovative cooling solutions for Desktop, mobile and wearable systems. The role involves architecture, design, analysis, prototyping and validation of cooling solutions. The position requires working closely with cross-functional teams as well as external suppliers. We need a creative thinker who can solve complex and challenging problems both independently as well as within a team environment. This position involves working in a dynamic and fast-pace environment with tight timing and dynamic constraints. 【Responsibilities】 • Responsible for Desktop and peripheral products thermal design • Design air/air and liquid/air cooling solution for consumer electronics • Define thermal policy and control algorithms and characterize system response • Develop analytical models of conductive and convective thermal systems • Drive component selection (Heat Exchanger, Fan, Pump, TIM etc…) • Optimize cooling solutions for all aspects of their performance and reliability • Develop validation test plans for thermal components to determine if they meet design requirements • Conduct tests, post-processing data, and communicating results to stakeholders • Review and maintain DFMEA, and test standards for the thermal system • Drive development programs with both internal and external engineering teams • Optimize design for cost and system-level reliability
應徵
10/15
新北市土城區經歷不拘大學
1. 主導影像品質分析,針對問題提出解決方案並完成技術報告 2. 設計與開發影像驗證計畫 (Test Plan),並建立產品生命週期各階段的測試標準與規格 3. 分析產線影像數據,監控影像品質表現,並與生產團隊協作解決異常問題 4. 建構影像測試環境,包含測試圖卡(Chart)的設計與導入,並主導相關設備的評估與驗證 5. 其他主管交辦事項
應徵
10/13
大塚資訊科技股份有限公司電腦系統整合服務業
新北市板橋區經歷不拘大學
大塚是一家充滿活力、穩步成長的公司,歡迎在這裡找到屬於自己的舞台! ●2008年10月股票掛牌上櫃 (股票代號3570) ●連續四年營收超越10億元 ●薪資水平在上櫃公司同業中名列前五名 ●擁有最完整的技術能量,每年客戶群超過2000家以上 ●是台灣產業涵蓋最廣的繪圖軟體解決方案代理商 ⭕ 工作內容 1. Siemens / FloTHERM,FloEFD 熱流分析軟體技術服務與對外教育訓練。 2. 協助業務解決 CFD 模擬軟體客戶端的應用分析需求與驗證。 3. 原廠技術資料研究與分析個案報告。 4. 客戶技術問題處理。 5. 其他主管交辦事項。 ⭕ 需求條件 1. 熟悉FloTHERM,FloEFD,軟體或同類型軟體經驗。 2. 具備使用CFD分析軟體處理開發專案,有相關使用經驗者尤佳。 3. 個性樂觀積極、具備團隊合作精神。願意與人接觸分享,能妥處理人際關係。 4. 充滿使命感與勇於挑戰的精神。 ⭕ 其他資訊 1. 薪資福利:依學、經歷面議核薪。 2. 上班時間:固定日班08:30-17:30 (含午休時間,彈性上下班30分)。 3. 依據公司經營狀況發放季獎金、年中分紅、年終獎金及員工酬勞等。
應徵
10/13
美律實業股份有限公司消費性電子產品製造業
台中市南屯區3年以上大學以上
1. NPI專案信賴性實驗規劃,品質/設計/製程問題,與工廠品質系統連接確保量產之品質 2. 客戶前期開發信賴性驗證與相關事宜處理。 3. 新產品RFQ、試產與量產問題點整合追蹤。 4. 設計/製程失效預防與審核(FMEA) 5. 品質管制計畫評估與審核(QCP)
應徵
10/16
台北市內湖區1年以上專科以上
1.負責手機, IOT, Drone及工業用相機模組對應客戶的技術窗口。(英文佳) 2.負責專案對內部研發,工程單位, 對外部合作商的專案統籌,協調與指揮。 3.負責新產品及新技術的開發。
應徵
10/11
群光電子股份有限公司電腦及其週邊設備製造業
新北市三重區5年以上大學
鏡頭光學或機構設計及驗證,建立鏡頭規格及品質規範
應徵
10/13
福碩科技實業股份有限公司電力機械器材製造修配業
台中市大雅區3年以上專科
CNC車床研發設計,自動化上下料機構設計,客訴問題處理及改善
應徵
10/14
維明企業股份有限公司其他電子零組件相關業
台中市大雅區經歷不拘碩士以上
1.類比/數位電子電路設計, 崁入式系統韌體撰寫 2.設計功能驗證規劃與執行 3.新產品技術研發 4.有實務設計經驗可獨立作業佳 5.薪 $40,000以上依能力敍薪
應徵
10/07
新竹縣竹北市2年以上大學
【在華邦,學習不設限,讓AI技術力與你的未來力同步成長!】 我們深信「人才永續」是企業創新的核心動能。華邦持續投資於數據素養與AI應用的培育,支持每一位人才掌握AI與數據應用的核心能力。 .內部學習平台提供超過4,000堂線上課程,其中包含近850堂資料科學、人工智慧、數據思維與程式技術等多元主題,支援彈性自主學習 .建立跨部門的 AI實作班與技術社群,定期舉辦研習與交流活動,讓知識轉化為實戰力 .完善數據應用學習資源,結合資料呈現(Power BI、Tableau)、資料處理(Python、JMP)、流程自動化(Power Automate、UiPath)、AI助手(Copilot),協助同仁有效以數據驅動決策與創新。 .搭配專業語言學習平台,提供學習補助與資源,鼓勵同仁持續進修,拓展國際視野 無論你是技術新秀還是資深專才,華邦鼓勵所有領域都能與AI結合,與國際接軌。持續精進、突破自我! 【邀請您將104履歷同步上傳至華邦官方網站,將使您的履歷優先被主管看見】此職缺履歷登錄網址:https://bit.ly/4mmbZ92 [工作內容] 1. Develop and maintain DRC related Calibre SVRF/TVF rule deck and tech file. 2. Develop and maintain dummy-fill utility to enlarge margin of processes. 3. Support designer/layout to fix design rule related issue. 4. Maintain Laker GUI for layout users. 5. Build and optimize automation flows (Python/TCL/Perl).
應徵
10/16
台中市神岡區1年以上大學
速聯(SRAM)創立於美國芝加哥,台灣分公司也在2025年慶祝開業三十四年,我們擁有包含自行車傳動系統品牌速聯(SRAM)、ROCKSHOX(避震器)、ZIPP(輪圈)與QUARQ(功率計)、TIME(踏板)在內八個世界知名自行車關鍵零組件品牌。本公司研發、測試與生產世界各地職業選手、自行車騎士熱愛的的電輔自行車動力系統、無線電子變速系統、功率計、及無線控制電子座管等產品,透過SRAM、ROCKSHOX與ZIPP等品牌,組成自行車高階關鍵零組件的生態系。 自行車產業在新冠病毒席捲全球期間起迎來強勁的成長,疫情過後高階自行車需求依然強勁,本公司目前正積極擴編團隊,為無線電子變速系統、功率計單位招募「製造工程師」。 我們歡迎來自機械工程、機構設計、產品組裝專業領域的專業人才加入。 工作內容主要負責用於無線電子變速系統、功率計的零件製程開發,包含: 1. 制訂製造、組裝程序與產品標準 2. 主導產品開發專案 3. 評估製程專案計劃,訂出最適化的製造流程 4. 定期檢測製程設備的重點參數 5. 持續改善現有生產製程 6. 調查並處理生產製程的異常狀況 7. 異常分析與改善 8. 治工具設計與組裝用機台開發 9. 制定標準工時與SOP 10.負責每日產量及良率的分析、監控及改善 11.執行主管交付任務 歡迎具備相關專長、經驗的您應徵。
應徵