5/20 IC設計工程師 (數位/類比)
- LRS_英屬維京群島商杰恒國際有限公司台灣分公司
- 人力仲介代徵
- 台北市信義區
- 經歷不拘
- 碩士
協助台灣知名半導體公司徵才，有興趣者歡迎連繫: [email protected]
5/20 類比IC設計工程師
- 聯合聚晶股份有限公司
- 半導體製造業
- 台北市內湖區
- 1年以上
- 碩士
※實際任用職稱依個人相關經歷敘薪。 1.大中小屏各類平面顯示器驅動晶片類比ˋ電源相關電路設計. 2.參與各類新產品開發規格定義ˋ區塊規劃ˋ設計模擬和驗證. 3.與邏輯ˋ系統和佈局設計工程師溝通合作,共同研發最具競爭力的產品. 4.工作經驗1年以上，具大尺寸 TFT Driver 相關類比設計經驗, 或是 Display Driver high-speed IO (ex. MIPI, LVDS, ) 設計經驗
待遇面議
員工30人
5/20 RFIC設計工程師(台北)
- 雷捷電子股份有限公司
- IC設計相關業
- 新北市新店區
- 經歷不拘
- 碩士
1. 開發RF收發機。 2. 開發LNA、Mixer、PA、Modulator。
待遇面議
距捷運大坪林站約370公尺
5/20 【研發替代役】Analog Design Engineer(台北)
- 英屬蓋曼群島商譜瑞科技股份有限公司台灣分公司
- IC設計相關業
- 台北市內湖區
- 經歷不拘
- 碩士
-Solid integrated circuit and solid state devices knowledge -Familiar with circuit design EDA tools -Knowledges in the following areas are a plus: PLL, high speed circuit design, I/O design, LVDS, ESD, ADC/DAC, switching regulator, low noise design
5/20 類比IC設計工程師0501(台北)
- 新北市板橋區
- 1年以上
- 碩士
1. High Speed IO/transceiver circuit designs on DDR4/5 PHY, flash PHY. 2. Power analog circuit designs on PMIC, DC2DC converter, LDO. 3. Analog circuit design on various functional analog IPs like ADC, PLL, DAC
5/20 Sr. High speed analog design engineer-Communication mixed signal(台北)
- 英屬蓋曼群島商譜瑞科技股份有限公司台灣分公司
- IC設計相關業
- 台北市內湖區
- 5年以上
- 碩士
1. 5+ years experiences with MS in EE 2. Hands on experiences on the design and validation of wireline high speed silicon 3. Experiences with strong design capability for the 10Gbps+ wireline data transfer 4. Experience with USB 3.1, or PCIe 3.0 and PCIe 4.0 is a plus
5/20 Analog Design Engineer-High Speed(台北)
- 英屬蓋曼群島商譜瑞科技股份有限公司台灣分公司
- IC設計相關業
- 台北市內湖區
- 1年以上
- 碩士
1. Analog circuit design and verification, such as OPAMP, Bandgap, ADC/DAC, PLL, and etc. 2. Power management circuit design and verification, such as LDOs, Charge Pumps, Switching Regulators, Gamma reference, and etc. 3. Whole chip integration with mixed-signal circuit. 4. HV I/O and ESD design.
5/20 Communication algorithm design engineer
- 富宇翔科技股份有限公司
- 通訊機械器材相關業
- 台北市內湖區
- 經歷不拘
- 碩士
1、Develop communication algorithm for •3GPP 4G/5G •WiFi •Bluetooth •Others 2、Study related specification. 3、Study technical document for signal processing. 4、Develop in Matlab environment.
待遇面議
距捷運港墘站約390公尺
5/20 類比IC設計工程師 (台北)
- 盛微先進科技股份有限公司
- IC設計相關業
- 新北市新店區
- 1年以上
- 碩士
1. Knowledge of micro-electronic engineering such as MOS I-V curve, op-amp operation point definition, semiconductor physics 2. Knowledge of audio application such as amplifier, DAC, ADC, etc. 3. Green hand of graduate school student who is major in electronic engineering is welcome
待遇面議
5/20 Sr. Engineer, Analog(台北)
- 英屬蓋曼群島商譜瑞科技股份有限公司台灣分公司
- IC設計相關業
- 台北市內湖區
- 1年以上
- 碩士
1. 5+ years’ experience with MS or PHD in EE. 2. Familiar with BJT circuit design. 3. Experience in these areas is preferred: BiCMOS, CMOS or SiGe high-speed (>10Gb/s) circuit, Linear electrical amplifier & equalizer, limiting amplifier, and CML/SST driver.
5/20 IC Architect -Cybersecurity (新竹/內湖)
- 鴻軒科技股份有限公司
- 電腦軟體服務業
- 台北市內湖區
- 3年以上
- 大學
1. 研究V2X與人機介面可能面臨之安全攻擊 2. 研究底層實體網路可能面臨之安全攻擊 3. 研究重要資料與軟體/韌體之可能安全漏洞 4. 針對車用所需網路安全提出防護機制 5. 實作關鍵防護機制之軟硬體
待遇面議
5/20 IC產品應用分析工程師
- 億光電子工業股份有限公司
- 光電產業
- 新北市樹林區
- 經歷不拘
- 碩士
1.IC LED產品設計、驗證及製作相關文件 2.負責設計產品改善工作，確保量產品符合品質要求 3.依據產品開發技術規格，執行產品細部設計研發工作，以確保產品符合技術規格 4.製程改善與新設計量產導入 Job Description 1.Responsible for IC LED product design, validation, and the creation of related documentation. 2.Manage product improvement initiatives to ensure mass-produced products meet quality requirements. 3.Execute detailed design and development work according to product development technical specifications to ensure product compliance with technical standards. 4.Implement process improvements and introduce new designs into mass production.
5/20 (研發替代役)類比IC設計工程師(台北)
- 雷捷電子股份有限公司
- IC設計相關業
- 新北市新店區
- 經歷不拘
- 碩士
1. 開發偏壓電路，如Bandgap等偏壓參考電路。 2. 開發運算放大器、濾波器等信號處理模塊。 3. 開發ADC、DAC、PLL等系統。
待遇面議
距捷運大坪林站約370公尺
5/19 [板橋]AC/DC類比IC設計工程師
- 通嘉科技股份有限公司
- IC設計相關業
- 新北市板橋區
- 經歷不拘
- 碩士
通嘉致力打造工作/生活/健康兼具的職場環境，歡迎你加入展開「通嘉就是你家」旅程! 本職務負責工作如下： 1. 負責類比電源IC之設計/模擬/驗證/除錯 2. 管控類比電源IC之設計/模擬/驗證/除錯..等流程，追蹤相關流程進度 3. 撰寫各設計流程之設計/除錯分析報告 【必要條件】 1. 熟悉電源類比IC設計or Switching power converter 2. 熟悉電子電路 3. 熟悉HSPICE Simulation and Design Flow 4. 對電源IC設計有熱忱者，能團隊作業，具當責態度
5/17 【2024研發替代役/預聘｜校園徵才】RD Team_Analog Design Engineer_類比IC設計工程師 (台北/新竹)
- MPS_芯源系統有限公司
- IC設計相關業
- 新北市汐止區
- 經歷不拘
- 碩士
Job Summary: Designing analog and mixed-signal ICs for Power Management Products utilizing leading edge sub-micron BiCMOS /DMOS technologies. Products to be designed may include, switching regulators, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, PDAs, notebooks, cell phones, telecom, fiber optics, digital camera, network equipment, and automotive. Essential Functions: • Works on product definition, circuit synthesis from the transistor/resistor level up to the system level, simulation, layout supervision • Participates in the entire product development cycle, from product definition through product release. Qualifications: • MSEE / PhD of electronic engineering, analog or digital IC design topics • For analog, familiar to power converter (buck/boost/buck-boost/LDO) analog design will be the plus • Self-motivated, could have strong team work/collaboration with overseas colleges.
5/17 類比IC設計工程師
- 鯨鏈科技股份有限公司
- IC設計相關業
- 台北市信義區
- 6年以上
- 碩士
1. 高速介面電路設計 2. 負責Serdes PHY Ex. MIPI/PCIE PHY的開發與維護工作 3. 類比IP設計(EQ, CDR, OP, OSC, Regulator, BandGap, ...)
待遇面議
5/17 【2024研發替代役/預聘｜校園徵才】RD Team_Analog Layout Engineer_類比IC佈局工程師 (台北)
- MPS_芯源系統有限公司
- IC設計相關業
- 新北市汐止區
- 經歷不拘
- 大學
Job Summary: Layout Engineer will work directly and indirectly with Design / CAD / Layout Manager in development of Mixed-Signal and Analog Integrated Circuits. Individual will perform job professionally and independently. The following are the requirements for this job function. Essential Functions: • Layout Schedule Estimation • Device Placement on block level according to matching requirements • Block implementations on Top Level • Signal matching / sensitive nets shielding technique • Pad / ESD rule and routing / connection • Database DRC & LVS verifications • Chip Tapeout in accordance with company's Tapeout Procedure • Positive Attitude Qualifications: • Layout experience in Analog and/or Mixed-Signal Circuit Design • Ability to do chip plan, estimate die size and project schedule • Ability to resolve DRC & LVS data verification and tape out chip independently • Familiarity with fundamentals of analog processes • Experience with Cadence and/or VIRTUOSO tools preferable
5/17 CAD Engineer
- Kaiku_開酷科技股份有限公司
- 電子通訊／電腦週邊零售業
- 台北市南港區
- 2年以上
- 大學
Job Descriptions: -To establish and manage central libraries, and validate simulation flows. -To work with different technology nodes and provide flows/methodologies. -To guide and assist designers to solve tool issues. -To develop in-house EDA/CAD flow solutions. KaiKuTek is the world's leading provider for 3D gesture sensor using mmWave Radar with embedded AI accelerator. We possess key technologies in areas such as Antenna-in-Package (AiP), ML algorithm, AI accelerator, as well as 60 GHz radar transceiver design. With recent merger by JMicron, founded in 2001 and located in Hsinchu Science Park, our product portfolio expands to high speed SerDes bridge controller SOC's mainly in storage application utilizing USB, PCIe, and SATA. This new sensing technology will change and redefine human-machine interface as we know today, and mmWave technology combined with high speed SerDes will open door to many new possibilities and application frontiers. KaiKuTek is looking for enthusiastic CAD developers willing to take upon new challenges of working closely with cross functional teams, including MMIC/RFIC designers, digital IC designers, antenna/packaging engineers, hardware engineers, software and firmware engineers, production and testing as well as marketing and FAE, to optimize the overall SoC performance in terms of power, area, functionality, testability as well as to create proof-of-concept for new customer engagement.
待遇面議
距捷運南港展覽館站約420公尺