5/05 電子工程師
- 連銘科技實業股份有限公司
- 其他電子零組件相關業
- 台中市中區
- 2年以上
- 學歷不拘
1.電子應用專業或電器維修類工程相關; 2.有家用電器或電子產品類開發、維修、測試經驗,如電飯煲、電磁爐、飲水機、电风扇等; 3.一年以上工作經驗,能接受派駐印度(三個月回台一次),有出差津贴。
1.電子應用專業或電器維修類工程相關; 2.有家用電器或電子產品類開發、維修、測試經驗,如電飯煲、電磁爐、飲水機、电风扇等; 3.一年以上工作經驗,能接受派駐印度(三個月回台一次),有出差津贴。
1. 依據產品功能進行測試設備開發:包含測試計畫的訂定,測試流程設計及 PCBA頂針治具開發. 2. 新產品試產和量產階段工程問題改善優化 3. PCB/PCBA 代工廠聯繫與製程中問題解決 4. 具使用類似 Labview 的開發方式進行對PCBA的測試設備編程經驗尤佳 Test Rig Design, Implementation, and maintenance: • Coordinate the decision of test strategy for a new PCBA. • Design electronic testing processes, the required rigs and equipment. • Automate testing processes by using LabView tool when required. • Implement the test rigs and equipment at subcontractor or in-house production. • Introduce and maintain the rigs for usability in production. • Update the rigs if required based on approved continuous improvement actions. PCBA Design Review and Manufacture: • Review PCB and PCB Assembly (PCBA) of a new design. • Review PCB and PCB Assembly (PCBA) of design changes. • Propose PCB/PCBA design changes for maximising manufacturability. • Liaise with PCB supplier on manufacture Gerber changes, V-cuts and design artefacts that is required for efficient production of PCB. • Liaise with PCBA subcontractors on special requirements of SMT and DIP processes. • Involve in the revision of the design BoM into the manufacturing BoM. • Communicate requirement and coordinate the creation of rigs required for PCBA production (e.g. stencils and carriers) Standard Work Implementation in Production: • Create new Standard Work Instructions (SWI) for SMT/DIP processes at subcontractors and for in-house manufacture. • Revise existing SWIs, upload to DCOs and follow up approval process to completion. • Create and implement electronic testing SWIs, including power up testing, GP functional testing, burn-in testing if required. • Introduce the standard works into subcontractor or production line, by releasing the documents and offer trainings. • Assist in the continuous improvement process of PFMEA. Sustaining Engineering Support: • Assist in validating alternative components for EOL engineering. Health & Safety: • Maintain a health and safe work environment and work with the Line manager to mitigate and eliminate hazards that put at risk fellow employees. • Conduct routine safety audits and action issues identified promptly and reliably. • Participate in departmental risk assessments, incident reporting and incident investigations.
Support the component suppliers during development and series phase regarding characterization of electrical drives and confirm the relevant KPIs (key performance indicator) such as NVH (Noise vibration harshness), torque and efficiency. Specify, purchase, set-up and operate independent measurement equipment for electrical drives. The use of measurement data analysis tools (Matlab, CANape or similar tools) should be familiar in order to derive the interpretation of the generated measurement data. Experience with common measurement technology for the characterization of electric drives required. (use of oscilloscope desirable) Conceptualization of new and innovative electrical drive unit product designs, working with an international development and design team in Europe and Asia. You will cooperate and represent the electric drive topics about functionality, components, electronics packaging and integration. Detailed product design reviews to ensure a high level of product quality are conducted regularly as part of the project and therefore work closely with the project team, engineering and manufacturing, as an active simultaneous engineering (SE) team member.
- First & central contact for factory and supplier problems in series production, cross-departmental link between development, plant, purchasing, quality & logistics. - You identify deficits in the production chain, create (cost) transparency, identify potential for increasing output, reducing throughput times and cutting costs, propose change packages and support their implementation. - You keep an eye on the entire production chain with regard to production processes and scaling levels, initiate planning and investment activities with those responsible to minimize risks (especially before SOP) - You have a very good overview and insight into the value stream, a strong focus on production, can assess and evaluate the overall situation in the event of problems and derive and communicate comprehensible measures. You control product and process changes, check change management and ensure their implementation. - Support the component suppliers in the specification process of the automated production line to achieve the required production targets (quality, costs, time) - Demonstrate project management skills including planning, prioritizing, monitoring, coordinating, and change & risk management.
1.數位電源程式開發。 2.韌體程式設計、編寫、除錯及功能驗證。 3.韌體設計問題分析與解決並追蹤。 4.其他主管交辦事項。
駐廠維護工程師: 1. 文書作業 2. 廠務系統操作、廠區巡檢及相關設備例行性保養 3. 支援協助工程師操作及維修設備 4. 廠務相關事務、廠務機台保養及故障排除 5. 協助廠務抄表、例行性PM及其他交辦事項 6. 自備機車 7.無經驗可 ----------------------------------------------------------------------- 助理工程師: 1.文書相關資料處理、文件控管等 2.巡視設備,PM表單填寫,異常通報 3.自備機車 4.無經驗可
負責電子產品 OEM/ODM 產品製程安排. 1. 熟悉電子產品生產流程 SMT/PTH/Assembly/Testing/Package...等製程 2. 熟悉 ERP 流程編立 BOM/SOP/ECN..標準文件 3. 熟悉 PCB Layout軟體與底片 REVIEW 軟體. 4. 熟悉電子零件應用,能夠解析電子線路排除產品問題 5. 熟悉相關測試儀器操作,架設產品測試站 6. 具有對電子製造有熱忱且具電子工廠2年以上經歷者尤佳
1.專案規劃執行(訂定開發進度、編寫產品規格書) 2.熟軟硬體設計 3.電子電路開發、設計及測試除錯。 4.解決相關研發問題 5.多年電子開發實務經驗
1. 進行電子產品硬體系統之研發與設計。(有嵌入式系統設計經驗為佳) 2. 產品研發設計、除錯及測試與電路板佈局規劃,並控制設計進度。 3. 申請與取得各國安規或EMC╱EMI的測試認證。 4. 負責產品量產導入工廠計劃。 5. 負責產品技術轉移,並導入量產。 6. 提供其他部門相關技術支援。
!!!!!無誠意工作者,請勿試!!!!! 需弱電相關經驗 1.電信網路/監視架設規劃及維護等 2.解決客戶電信網路/監視需求/查修等 3.跑外勤(提供公務用車,須備駕照)
公司主要致力於汽車電子零組件、汽車安全控制系統及車用工具之產品的研發及生產,不斷研發及生產可提昇能源轉換效率之產品,並致力發展網路行銷通路。集團體系目前具有美國、英國及大陸等子公司,並於全球設立多處服務據點 主要工作內容: 1. 品質管理之SOP建立與優化 2. 推行品質管理系統流程 3. 產品品質持續改善 需求條件: 1. 執行過品質系統建立及維持 2. 具車廠相關工作經驗,需使用過、熟悉IATF 16949 3. 英文能力須能閱讀及回覆信件 4. 電子電機背景尤佳
1.RF類比及數位電路設計開發、電路板佈局及專案執行。 2.負責產品規格測試、除錯、試產導入及法規認證。 3.評估RF相關零件模組特性。
!!!!!無誠意工作者,請勿試!!!!! 無經驗佳,肯學習者,公司會栽培訓練~ 1.電信網路/監視架設規劃及維護等 2.解決客戶電信網路/監視需求/查修等 3.跑外勤(提供公務用車,須備駕照)
1.安裝/設定/維護網路設備/電腦主機 2.維護系統效能,保持系統正常運作並進行除錯。 3. 記錄各系統維護及異動的相關資訊。 4. 負責軟、硬體及其他系統周邊裝置的安裝及維修。 5. 幫用戶端或作業員設定好電腦工作環境(如:應用軟體)。 6. 建立使用手冊及程序,並對使用者進行教育訓練。 7. 與操作員、使用者和管理階層溝通,評估系統修改及建立新系統的需求。
1. 維護現有e-Bike系統通訊協議,依公司策略調整與優化協議架構 2. 評估、整合與測試e-Bike電控系統,與原廠協調合作,有效率的分析、釐清與收斂問題 3. 管控電控零組件的韌體版本與發佈通知 4. 提供業務單位技術支援,產出相關技術文件 5. 協助公司參加國內外展會
1. 負責硬體產品的優化、加工、測試、維護 2. 繪製電路圖和 PCB Layout check 3. 模擬電路、進行零件規格確認 4. 硬體相關文件編寫 5. 硬體相關問題解析 6. 支援系統整合測試驗證 7. 確保產品安規測試符合規範 這個職務需負責公司第一線產品的加工、測試、維護、優化等等,加工(焊接、雷射刻印等等)品質與細心程度要求較高,須具備手工藝等級的技術與態度,歡迎加入馬森團隊。
1.Embedded System新產品線路設計研發及硬體系統整合設計 2.測試新產品功能,相容性 3. 具備數位電路設計能力、PCB佈線指導概念及除錯等能力 4.了解ARM Based架構知識
※有無線充電產品相關經驗為佳 1.負責新產品設計與評估、找尋合適零件供應商 2.負責新產品材料的測試與選用,制定及確認產品開發規格 3.測試、檢測與分析新產品、組件之可行性、設計、操作和性能表現 4.評估及檢驗新產品模具設計、開模、試模,並能評估模具開發效益 5.檢視及協助確認產品外型與包裝設計 6.追蹤及督導新產品開發專案進度及排定開發時程進度表 7.協助新產品生產製程安排、試產過程檢討及設計修正、解決量產及製程中相關問題 8.督導產品說明書及相關技術文件製作 9.建立產品使用售後問題資料庫,並持續協助產品改良 10.與零組件工廠洽談合作、定期檢討產品品質問題 11.其他主管交辦事項