美商瑞伍德供應鏈股份有限公司台灣分公司

The Hardware Test Engineer provides crucial hands-on technical support for production test systems. This role is responsible for independent execution of issue triage and in-depth troubleshooting of production fallouts. This engineer will also actively contribute to yield improvement initiatives and assist with the development, validation, and maintenance of tester stations and fixtures. Minimum Qualifications: ● BS or MS degree in Electrical Engineering, Electronics Engineering, or a related field. ● 1-3 years of practical experience in electronic manufacturing or related hardware testing environments. ● Proficiency in digital and analog circuit analysis, PCBA bring-up, and systematic troubleshooting of test failures. ● Solid command of EE lab instruments (e.g., oscilloscopes, DMMs, power supplies) and proven ability to apply these skills to solve production problems. ● Demonstrated ability to work independently on assigned tasks and communicate technical findings clearly. Preferred Qualifications: ● Foundational experience with PCBA and module failure analysis (FA) techniques. ● Familiarity with production data analysis and simple process improvement methodologies. ● Experience with Linux operating systems in a testing or manufacturing environment. Responsibilities: ● Execute and own the PCBA and module troubleshooting, bring-up, and rework processes from start to finish. ● Maintain and update product troubleshooting procedures and guides as needed. ● Analyze failure data to provide detailed failure analysis findings and clear root cause hypotheses to the test development team. ● Serve as the primary on-site technical contact for manufacturing partners, rapidly triaging production line issues and driving immediate containment actions. ● Collaborate with cross-functional teams (e.g., HW Design, Manufacturing) to ensure test integrity and high product yield.

Responsibilities • Responsible for overall PCB process development and readiness within the supply chain • Drive Design-for-Manufacturability (DFM) activities with vendors and provide technical support in enhancing process capability and solving technical issues • Identify equipment, fixture, and tooling needs and drive implementation efforts to qualify and optimize the manufacturing process • Establish quality and process control plans at vendors for early detection of issues and to ensure the highest level of quality and reliability is consistently delivered • Responsible for conducting Design/Process FMEA, Failure analysis, PPAP, and Statistical Process Control • Knowledgeable in conducting DOEs, Line qualification, Machine Buy-off, Cycle Time & UPH studies, and Automation • The SQE will work closely with the engineering team to understand product design intent and then be a major part of supplier identification and selection • Develop and institutionalize our vendor and supplier selection process • Evaluate prospective vendors for process capability based on project needs • Publish concise reports on module yield performance, specification convergence status; drive Failure analysis, Corrective Action implementation plan, and yield bridge to mass production • Responsible for supplier quality management with a focus on assessing supplier production and quality controls, evaluating supplier readiness, and adherence to module quality plan • Partner with Engineering to define product acceptance plans based on PRD • Collaborate with Suppliers and Engineering teams in assessing, proposing, and developing process technologies based on project requirements Requirements • PCB experience with mSAP, HDI / Laser Microvia, Blind / Buried Via, Via-In-Pad, and commonly used Surface Finish in the industry • Strong knowledge of the PCB manufacturing processes with an understanding of equipment, chemistries, and methodologies commonly used in the industry • 8+ years of experience in supplier quality engineering in consumer electronics with relevant work experience; some process engineering experience is preferred • Hands-on experience with PCB electrical performance and reliability testing • BS degree in Chemical, Electrical, or Mechanical Engineering is required • Experience developing process & quality plans, supplier quality audits, and driving corrective actions/failure analysis efforts for PCB • Experience with quality tools such as SPC, FMEA, GR&R, DoE, metrology, GD&T, and Correlation studies • Experience with doing data analysis using Excel, Minitab, or JMP • Experience in developing and qualifying tooling, jigs, and fixtures • Good at identifying risk and developing solid plans to mitigate • Good communication, problem-solving, and collaboration skills • Familiar with FPC and Rigid flex module manufacturing process and quality control • Project management experience and proven track record of creative problem-solving in an unambiguous environment • Have Ownership/Leadership mindset with an ability to be in a leadership position and achieve results with minimal supervision Location: Taipei or Taoyuan

Looking for a solid Materials Program Manager to support an autonomous vehicle companies Supply Chain department. This person should have a background in materials planning and understand the key vendors involved in electronics components, mechanical components, automotive components, etc. The key responsibility for this job will be manual demand planning (Manual MRP experience). There is no SAP, ERP, or SW suite that will be utilized, this is all manual production planning/Manual MRP’s through Excel/GSheets, so advanced Excel or GSheet’s experience is a must have. Scope: • Strong understanding of the “ Clear To Build ” report AKA CTB. Some companies call it a shortage report or build status report. This is the MPM's primary task which will be focused on. Note: CTB “Clear to Build” is essentially an MRP. Building stuff in batches/batch building aka Batch Production, job production, lot production, etc. are all additional terms associated with CTB/MRP’s. • Experience with Manual Demand Planning, Manual Production Planning, Manual MRP is the key requirement. • Degree in Supply Chain or similar is ideal. • Analyze manufacturing build plans against inventory/supply chain data in order to determine demand for materials replenishment. • Retrieve quotes from suppliers & submit PO’s. • Manage delivery schedules in order to ensure materials arrive ahead of required dates. • Track/Mitigate Excess and Obsolescence. Required: • Strong understanding of the “ Clear To Build ” report AKA CTB. Some companies call it a shortage report or build status report. Note: CTB “Clear to Build” is essentially an MRP. Building stuff in batches/batch building aka Batch Production, job production, lot production, etc. are all additional terms associated with CTB/MRP’s. • Experience with Manual Demand Planning, Manual Production Planning, Manual MRP is the key requirement. • Advanced spreadsheet / Excel skills; Ability to generate complex dashboards, tools, and reports. Experience with excel formulas like - VLOOKUP, SUMIF, COUNTIF, IFERROR, INDEX, MATCH, MIN, etc. • Solid experience working as a Materials PM, Buyer/Planner, Materials Planners, or similar. • Understand how to read and understand bill of materials (BOM’s) and manage inventory accuracy. • Strong knowledge of MRP (Materials Requirements Planning) system functionality. Remote