「半導體製程工程師(新竹)」的相似工作

1.製程改善專案執行、追蹤 2.提升產品製程能力及問題處理 3.製程/設備異常排除、分析改善 4.其他主管交辦事項

The Installation Engineer job is high profile and exciting opportunity for adventurous souls! Works under minimal direction from Management. Completes documented procedures and exercises judgment within defined procedures. Recommends changes to existing process and procedures. Primary responsibility is to strive for predictable Cycle Times and Warranty Starts for new tools installed and upgraded at our customer sites. Includes activities associated with setup, alignment, calibration, troubleshooting, diagnosing, and repairing of highly sophisticated capital equipment. Represents the company to the customer and assumes accountability for customer satisfaction with all installation/upgrade-associated activities. Assures operational quality of system equipment. Works directly with KLA regions and customers to verify new tool performance and transfer tool responsibility. Seeks warranty sign-off on newly installed tools Roles and Responsibilities • Installation of new tools in the field. Follows all procedures and provides a consistent result within specified cycle times. Achieves a predictable warranty start. • Evaluates, analyzes, diagnoses and fixes technical equipment problems related to installation. Can repair issues using standard procedures or innovate to resolve system problems which can have multiple causes. • Solving problems and repairs of sophisticated system level problems are based on Installation Engineer's technical knowledge and training. Installation Engineers seek help from Staff Engineers and Management when problems occur that may exceed knowledge, education and training. • Prepares field service reports and daily passdown on Installation progress and non-conformances. Contributes to post-activity Quality Feedback Report • Hold pre-installation meetings with the customer to scope customer unique requirements then create plans of action to measure and satisfy the unique needs. Execute plans of action and validate deliverables with the customer. • Meet with customer to facilitate warranty signoff after the activity is complete. • Acquires all vital international travel documents and manages their personal lives to be ready for domestic and occasional international travel. • Handles personal finances to prevent disruption to scheduled activities - even when traveling for extended periods. • Travels domestically and internationally by commercial transportation to customer sites. • Assists other engineers as necessary. Provides mentorship and technical assistance at customer sites. Can develop basic POAs. Provides phone and on-site support for junior engineers *Note: Only applications with *English resume* will be considered. *Please also apply through KLA Career page: https://careers.kla.com/

*此專案簽約一年，到期視情況另有其他方式留下，為長期職務。 ●享有福委會福利●期滿另有獎金 ※歡迎對半導體業有興趣的優秀人才加入我們的行列※ 1.設備裝機 2.客戶端現場(無塵室內)設備保養、修繕等 3.公司其他據點支援 4.需配合加班或輪班 5.與客戶維持良好關係 6.遵守客戶端工安規定

*此專案簽約一年，到期視情況另有其他方式留下，為長期職務。 ●享有福委會福利●期滿另有獎金 *此職務為部品販賣部的零件銷售窗口。 *此職務會與客戶對應，等達足夠經驗能力，同仁需配合on call(排班制)。 1. 與半導體客戶進行零件販售之對應(含出貨行政流程)。 2. 處理客戶訂單並查詢部品資訊、進行報價。 3. 報告整理與分析(使用Excel)，並完成帳目結算。

*此專案簽約一年，到期視情況另有其他方式留下，為長期職務。 ●享有福委會福利●期滿另有獎金 *資訊相關背景優先安排 1. BPM系統表單開發與維護 2. 依據企業流程變動，協助開發SAP ERP程式與外端程式對接ERP之功能 3. 公司內部其他應用系統開發與維護工作 4. 開發自動化程式 5. 完成主管交辦之任務

透過ASM官網投遞此職缺，將優先安排履歷審核 【English resume is required】 Please apply for this position ONLY through ASM website : https://www.asm.com/open-vacancies/snr-field-service-engineer-2?gh_jid=4592238101 ASM is recruiting for multiple FRESH GRADUATE headcount of Field Service Engineers in our ALD/EPI/PEALD/CVD business function across Taiwan include Hsinchu, Tainan and Kaohsiung. As an Field Service Engineer at ASM, you’ll have the opportunities to get involved in a wider scope of work compared to our larger competitors. While the workload is challenging, you are given the independence and autonomy to perform at your peak. This work requires thinking “outside of the box” in an innovative manner, so you must have the ability to collaborate with others to deliver creative solutions, work well under pressure and pay great attention to small details. Responsibilities: • Maintain tool uptime and ensure excellent execution of installation and support of hardware issues. • Develop, maintain, and ensure the relevance of technical information used by internal and external stakeholders. • Understand and build long-term innovative global technology systems that enable enhanced customer relationships. • Ensure communication vehicles, e.g. telephone, email, and presentation, etc. are able to facilitate efficient and consistent customer follow-up. • Drive continuous improvement of the customer experience through team, hardware, software, and support tool development. • Drive and manage new product installs and subsequent hardware development. • Projects manage new evaluations and ensure the success of the project. • Additional assigned tasks when necessary. • Business travel when necessary. • Provide end-users with training on equipment operation, best practices, and preventive maintenance to ensure proper and efficient use. • Adhere to safety guidelines and industry standards while working on-site, ensuring all activities are compliant with company and regulatory requirements. • Collect and communicate field data, customer feedback, and equipment performance insights to internal teams for continuous product and service improvement. ASM is a leading, global supplier of semiconductor wafer processing equipment. Our ambitious team is dedicated to delivering innovative technology solutions to the world’s leading semiconductor manufacturers. We have over 2,200 employees based in 16 countries, including Belgium, Japan, Netherlands, South Korea, Singapore, Taiwan and United States. Together we work to develop Epitaxy, ALD, PEALD, Vertical Furnaces and PECVD thin-film deposition technologies for our customers. Our goal is to remain an industry leader by being ahead of what’s next. We accomplish this by focusing on finding collaborative solutions to make integrated circuits, or chips, smaller, faster and even more powerful. ASM, an inclusive workplace We at ASM are a truly global organization that works diligently with an open-mind in all areas of our business. We strive for a culture and work style that fosters trust and transparency. We put our people first, and that is how we will continue to succeed. We are an equal opportunity employer and value diversity. We recognize and value the differences between individuals, including gender, ethnicity, religious beliefs, sexual orientation, knowledge and experience, work background, age, skills, amongst others. Recruiting and developing a diverse workforce provides a wide range of perspectives. This enables a culture of continuously exploring and adopting new technological ideas and innovations, and it also enables us to deliver excellent products and service to our clients.

1. 負責光罩前段或後段製程。 2. 良率提升改善/CPK Monitor 3. Recipe Fine tuning。 4. 相關CIP專案計劃執行。

1. To improve device yield &CIP in order to meet customer request and customer service. 2. Identify and solve process and device problems. 3. Support for customer visit and audit.

Job description ・Technical support of customer Contact to project owner and discuss about technical issue Update of evaluation results ・Development of chemical solution for Semiconductor manufacturing process Leading of product development Technical discussion with Taiwan/Japan site RD members Career Over 2-3 years experienced of RD field in chemical supplier for Semiconductor Or fresh graduates from graduate school (Experience of formulation design of CMP products(slurry and post clean) and functional clean products preferred) Chemical company preferred Having experience both development and technical support preferred 主要為半導體製程之研磨劑、洗淨劑相關配方研發及客戶端技術支援

We are seeking a customer-focused, technically adept, and relationship-driven Customer Engagement Application Engineer to join our global team supporting KLA’s industry-leading wafer inspection and metrology solutions. In this front-line, customer-facing role, you will be the trusted technical advisor and strategic partner to our customers, driving product adoption, solving complex challenges, and building long-term relationships that fuel success. You will collaborate across functions to deliver high-impact solutions in the dynamic world of semiconductor manufacturing. Key Responsibilities: • Serve as the primary technical interface between KLA and customer, building trust and credibility through consistent, high-quality support. • Deliver applications support for KLA’s wafer inspection and metrology tools at customer fabrication facilities. • Lead customer engagements including product evaluations, new tool introductions, and drive competitions. • Drive customer success by conducting acceptance tests, recipe development, hands-on training, and pre-sales technical enablement. • Cultivate strong customer relationships by understanding their technical needs, aligning solutions, and ensuring satisfaction through onsite support . • Collaborate with customers and internal teams to co-author technical papers and present at global industry symposiums. • Develop and share Best Known Methods (BKMs), SOP ( Standard Operating Procedures ) materials, and technical documentation to empower global Field Applications teams. • Act as a cross-functional bridge, aligning customer feedback with engineering, sales, and marketing to drive continuous improvement. • Analyze complex technical issues, apply statistical methods, and deliver innovative, data-driven solutions. • Report regional insights and escalate field issues to product divisions, ensuring timely resolution and product evolution. Qualifications: • Master’s degree in Physics, Optics, Engineering, Material Science, or a related field; semiconductor process knowledge is a strong plus. • Proven experience in customer-facing technical roles, with a strong track record of building and maintaining customer relationships. • Demonstrated success in technical problem-solving, project execution, and cross-functional collaboration. • Willingness to work in semiconductor cleanroom environments. • Strong project management, leadership, and organizational skills. • Excellent presentation, communication, and interpersonal abilities. • Fluent in English, with the ability to communicate clearly via email, video calls, and in-person meetings. • Ability to manage multiple priorities in a fast-paced, global environment. Key Competencies: • Strong customer orientation with a passion for delivering value and building trust. • Advanced analytical and statistical thinking for data-driven decision-making. • Effective collaboration and communication across diverse teams and cultures. • High level of initiative, ownership, and accountability in driving results. • Resilience and adaptability in dynamic, high-pressure environments. • A proactive team player with a growth mindset and a drive for excellence.

新竹縣竹北市環科一路1號(昌益園區) 1.半導體後段製程設備之技術支援 (以研磨技術設備為主) 2.設備安裝/維修 3.提供客戶研磨技術上的支援 4.客戶問題電話或現場對應 5.與日本原廠技師接洽並對應客戶問題

KLA美商科磊致力於維護身心障礙者就業權益，歡迎領有身心障礙手冊或證明的夥伴投遞履歷，加入KLA！ The future is ours to create. Whether it’s a driverless car, VR experience, or factory robotics, we help turn theory into possibility. We help create technological devices and ideas that transform our future and shape our current life. We’re looking for Customer Service Engineers who contributes the support and provide unique customer value in the global electronics ecosystem. You will be able to learn the advanced mechatronic engineering and collaborate with leading customers across the globe, our expert teams of physicists, engineers, and problem-solvers design solutions that move the world forward. Roles and Responsibilities • Evaluates, analyzes, diagnoses and troubleshoots technical equipment problems via telephone or at customer site. Ensures equipment improves customer production. • Repairs of system level problems (which have multiple causes and for which no standard procedures exist) at customer sites. • Represents the company to the customer and assume accountability for customer happiness with service. • Assures operational quality of system equipment. Coordinates actions with customers to minimize down time. • Provides assistance to Installation Engineer in resolving problems. • Prepares fields service reports on customer support activity and provide documentation to other supporting functions on re-occurring problems. • Build positive relationship with customers and increase customer satisfaction by resolving sophisticated requests and issues. • Contribute to the Capturing, Re-use, Collaboration, and Improvement of knowledge using available systems • Develops and handles return materials authorization (RMA) processes for ensuring customer returns, exchanges, service and repairs are done with speed and accuracy and all client/customer service delivery issues are resolved. • Executes technical critical issues with detailed problem statement and pass-down to work with system engineering technical team in customer site. • Estimated travel is 20% once trained in the classroom as part of on-the-job training program. Although, much of the job responsibilities will be performed in the office or at the customer site supporting various projects and initiatives. In addition to problem diagnosis and resolution, other support duties will include characterization and support of customer demos and field projects. *Please visit and apply on our career website: https://kla.wd1.myworkdayjobs.com/zh-TW/Taiwan/job/Hsinchu-Taiwan/Customer-Service-Engineer-Hsinchu_2102329

*此專案簽約一年，到期視情況另有其他方式留下，為長期職務。 ●享有福委會福利●期滿另有獎金 1.無塵室作業安全及環境巡檢稽核 2.配合客戶廠區規定申請特殊作業或召開工具箱會議等 3.公司內部相關職業安全衛生規定的執行 4.需配合加班或輪班 5.公司其他據點支援

What we are looking for We’re looking for a self-motivated, result-driven Application specialist who will be responsible for TW application support, reporting to Nova’s Application Team Lead. The Application specialist is a field role responsible for supporting customer’s application development on-site/remotely. The job of the position involves supplying metrology solutions, bridging the gap between field and HQ, supporting pre-sales activities, and being sensitive to technology roadmap change, joint work with HQ divisions to win key demo/evaluation activities. The role should be working closely with account team to support pre-sales activities to ensure Nova has a winning strategy. Role & Responsibilities • Supply/sustain on-site Nova tools metrology solution (OCD / XPS / Raman / SIMS etc…) supporting multiple modules, i.e., Litho/CMP/Etch/Dep. • Communicate and establish good relationship with customers for process & issue understanding. • Involve up-to-date new metrology technics / products / applications and perform pre-sales demo / presentations to customers. • Co-work with HQ or other subsidiaries (i.e., IL/US/CN/JP/SG) to develop new application solutions, able to support / work abroad. • Pro-actively maintain semiconductor knowledge from industry and international academic conferences. • Be highly sensitive in collecting market information. • Own presales activities for tools adoption/utilization. • Be flexible to cross-divisional activities per company’s requirements.

如欲投遞履歷,請上Amkor官網 https://careers.amkor.com.tw/ 1. NPI related 2.Technique support to customer 3.Process development with customer 4.Customer quality issue handling 5.Customer Audit handling

【部門說明】 本部門在新產品開發階段負責製程設計與驗證(Process Design & Validation), 透過DFM評估以及跨部門討論來改善產品設計, 規劃生產流程並導入大量生產。 在這裡工作可以學習到： - 縱向開發與研究先進製程技術及橫向跨部門溝通協調，會應用到設備整合的知識、產線規劃與數據分析的技巧。 - 了解SMT與機構組裝未來趨勢，研究微型化與先進製程應用。 - 運用自身工程經驗，配合DFM、PFMEA等方法，評估產品的可製造性與潛在風險，並研究新的製程、材料與設備應用。 - 垂直整合完整的工廠流程，熟悉新產品從研發到量產的所有工作，深度了解設計端與製造端的連結。 - 該職位是多面向整合的要角，需統整產品開發時的問題，透過跨部門溝通協調與整合能力，解決生產線上的品質、製程、材料相關問題。 - 研發與製造團隊間的橋樑，並與國外工程師共同合作，拓展國際視野 。 【工作內容】 - New product design review for manufacturing - Introduction of new product prototype/pilot run, verification and mass production -Evaluation, development and introduction of new materials, processes and advanced production technologies. -Abnormal quality and failure analysis and improvement. (PFMEA) -To coordinate cross function team and do risk assessment for making (consolidating) the decision of production/manufacturing -To communicate production status, issues with cross function team and lead / drive cross function team on issue solving -To handle the regular PID (Product In Development) meetings and coordinate follow-ups

1. 保養日常設備，維持設備正常運作並維持產能狀況及減少停機時間。 2. 判斷設備異常的原因，並排除問題。提出潛在設備問題，並提供相關預防措施方案 3. 協助日本原廠工程師在客戶現場作業或通過電話或客戶端現場評估、分析、診斷和排除技術設備問題。 4. 提供客戶正確的產品規格與應用相關資訊及產品技術諮詢，以作為客戶設計產品時的參考依據。 5. 工作需進無塵室，駐點固定為竹科，並可配合公司國內外短期出差。 6. 極具競爭力之公司薪資福利，公司薪資半導體業界前5%強，為高速成長期公司，升遷管道暢通。 7. 特休規定優於勞基法、健檢補助、年節獎金、穩定年度分紅調薪...等等

【The Role】 This role will work closely with sales teams, customer technology engineers in the field, R&D scientists, and manufacturing teams to develop and transfer creative and robust CMP solutions to address customers' needs. This role is in Hsinchu(Zhudong), Taiwan. 【In this role you will】 • Utilize knowledge of semiconductor CMP process to interpret the voice of the customer (VoC) and critical to quality (CTQs) for problem definition • Propose CMP product (slurry, pad, conditioner, PCMP clean etc.) and process to solve customer problems or meet new market needs • Work with multi-functional teams to develop hypotheses and lead product design space assessment based on cleanroom experiments • Plan, execute and summarize cleanroom experiments systematically designed with multi-functional teams • Analyze experiments with statistical analysis tool (JMP) and derive conclusions with confidence • Communicate key learning and conclusions to various partners clearly and timely • Develop practical methods and creative engineering solutions to accelerate customer product adoption progress • Prepare data package that defines the solution and then promote the solution both internally and to the customer • Grow expert knowledge about leading-edge Entegris technology and products. 【Traits we believe make a strong candidate】 • In-depth understanding of CMP process and impact of CMP consumables (slurry, pads, conditioning disk, etc.) on CMP performance • Proven ability to work on complex projects in a team environment and lead the development of engineering solutions • Demonstrated project management skill and knowledge of semiconductor device and integration scheme • Knowledge of Six Sigma methodology and ability to use the design of experiment (DOE) to solve engineering problems • Demonstrated data analysis skills using statistical data analysis software – JMP, Minitab • Critical and systematic thinking in developing solutions to a complex problem, upbeat and capable of contributing both as an individual and part of a highly interdependent team • Excellent written and oral communication skills • Passion for knowing “how things work” and tenacious in finding answers • Ability to rapidly switch focus and be adaptable to change • Highly motivated and committed to continuous learning • Working experience in CMP-related manufacturing or semiconductor fabrication is required. • A bachelor's degree in a technical subject area (e.g., chemistry, material science, chemical engineering, or related field) is required. An advanced degree is a plus. 【Your success will be measured by】 To be successful in this role, this role will be a results-oriented, hands-on, and committed problem solver, with the ability to communicate effectively and work multi-functionally with minimal direction.

1.新評估項目導入，稽核及品質相關會議安排與執行，有品質管理經驗佳。 2.具有客戶服務意識和了解客戶需求能力，能夠主動回應客戶並提供有效的解決方案。 3.廠商客戶品質問題的處理與回覆、後續的分析追蹤與執行。 4.撰寫與審核8D Report，具備英文撰寫能力及良好跨部門溝通能力，針對品質問題進行追蹤處理。 5.協同維護氣體鋼瓶及化學品更換，氣體及化學產品出貨與倉儲管理。 6.異常排除，緊急應變處理，需多元性發展以協助其他專案報告及設備相關維護活動。 7.主管交辦事務執行。

1. 具蝕刻(ICP、RIBE)、塗佈、ALD等製程材料開發經驗 2. 熟悉車用產品開發流程，且具備FACA能力 3. 可對應工廠、供應鏈建立等工作，建置可製造方案 4. 具光波導、車用元件等經驗為佳

【The Role】 This position involves daily on-wafer testing to support Entegris applications and R&D requests, including analyses for WEC/Litho applications. The candidate will also develop and apply advanced on-wafer testing methods, focusing on Filtration/Purification products. 【In this role you will】 • Conduct day to day operation using on-wafer tools as well as maintain up-time of the on-wafer tool. • Work closely with other metrology team members and combine organic, metal, and particle results to understand whole picture of product performance. • Ensure safety while handling some of the most hazardous chemistries such as HF, H2SO4 used in semi-industry • Deliver accurate, repeatable and reproducible on wafer testing results to global R&D and Apps team to expedite new product development cycle, improve product stability/performance, and improve productivity. • Survey new on wafer testing techniques to ensure long term competitiveness. • Hands-on management of chemical and waste inventories, including material handling, status monitoring, and ensuring compliance with safety and environmental regulations; actively contribute to continuous improvement of lab systems such as 6S and EHS. 【Traits we believe make a strong candidate】 • MS Degree of Chemistry, Chemical Engineering, Material Science. • Over 3 year working experience as an Equipment engineer, process engineer, FSE/FAE/RD engineer. • Experiences in lab/fab environment is a must. • Willing to learn 300mm wafer wet/lithography process and hardware is a must. • Experiences handling highly hazardous chemicals, such as HF, H2SO4 is highly preferred. • Proficient English conversation skill is highly preferred. • Experiences as a fab Equipment/Process engineer is highly preferred. • Experiences in wet clean tool is a plus. • Experiences in lithography track tool is a plus. • Experiences in defect inspection/review tool is a plus. • Experiences in various 300mm wafer process tool is a plus. • Knowledge in various metrology techniques is a plus. 【Your success will be measured by】 • The results delivered for day to day operations. • The results derived from project team collaboration.