「半導體製程工程師(新竹)」的相似工作

1. 半導體設備機台的維修保養與售後服務 2. 客戶端現場(無塵室內)設備裝機、Trouble shooting、改造 3. 協助設備機台良率的改善與提昇 4. 需配合加班、輪班、ON CALL對應。公司其他據點支援(國內出差/國外出差)。 5. 需具備報告及與客戶溝通對應的能力 6. 需具備良好外語溝通能力(英文或日文) *與客戶維持良好關係 *遵守客戶端工安規定 *具半導體設備經驗尤佳

The Installation Engineer job is high profile and exciting opportunity for adventurous souls! Works under minimal direction from Management. Completes documented procedures and exercises judgment within defined procedures. Recommends changes to existing process and procedures. Primary responsibility is to strive for predictable Cycle Times and Warranty Starts for new tools installed and upgraded at our customer sites. Includes activities associated with setup, alignment, calibration, troubleshooting, diagnosing, and repairing of highly sophisticated capital equipment. Represents the company to the customer and assumes accountability for customer satisfaction with all installation/upgrade-associated activities. Assures operational quality of system equipment. Works directly with KLA regions and customers to verify new tool performance and transfer tool responsibility. Seeks warranty sign-off on newly installed tools Roles and Responsibilities • Installation of new tools in the field. Follows all procedures and provides a consistent result within specified cycle times. Achieves a predictable warranty start. • Evaluates, analyzes, diagnoses and fixes technical equipment problems related to installation. Can repair issues using standard procedures or innovate to resolve system problems which can have multiple causes. • Solving problems and repairs of sophisticated system level problems are based on Installation Engineer's technical knowledge and training. Installation Engineers seek help from Staff Engineers and Management when problems occur that may exceed knowledge, education and training. • Prepares field service reports and daily passdown on Installation progress and non-conformances. Contributes to post-activity Quality Feedback Report • Hold pre-installation meetings with the customer to scope customer unique requirements then create plans of action to measure and satisfy the unique needs. Execute plans of action and validate deliverables with the customer. • Meet with customer to facilitate warranty signoff after the activity is complete. • Acquires all vital international travel documents and manages their personal lives to be ready for domestic and occasional international travel. • Handles personal finances to prevent disruption to scheduled activities - even when traveling for extended periods. • Travels domestically and internationally by commercial transportation to customer sites. • Assists other engineers as necessary. Provides mentorship and technical assistance at customer sites. Can develop basic POAs. Provides phone and on-site support for junior engineers *Note: Only applications with *English resume* will be considered. *Please also apply through KLA Career page: https://careers.kla.com/

* In charge of customer account * To implement problem-solving processes in the Taiwan organization, and work with the Sales and Service organization on the improvement of product reliability at customer sites, and reduce Cost Of Ownership to our customers * Deliver technical presentation to customers, particularly on details of product design, technology, applications and safety * Regional authority for product selection * Promote new product and coordinate the local resources to manage Loan & Evaluation programmes * Resolve technical and applications issues

1.參與半導體製造前段製程中蝕刻液（Etchant）的開發與優化。 2.改良並調整蝕刻液的化學組成。 3.計畫並執行實驗，收集與分析實驗數據以進行組成配方的優化調整。 4.與台灣與日本的研發團隊討論實驗結果與改良方向。 ------------------------------------------------------------------- 1.半導体製造プロセス前工程のエッチャント開発業務。 2.エッチャント組成の改善、チューニング。 3.実験を計画して実行し、取得したデータをまとめ、組成改善のチューニングを行う。 4.実験結果や改良方針について、台湾/日本のRDチームと議論を行う。

一、【日本滋賀-CAM工程師】 ◆薪資： 月額基本給：25万円~35万円 (年收約400万円~620万円) ◆工作內容： ・使用CAD/CAM系統製作機械零件及零件加工數據 ・使用銑床和NC Router進行切削加工、設計與製作加工治具以及維護管理 ・規劃和執行多部件的組裝工作、負責加工過程中的檢查和品質監控 ・其他主管交辦事項 ◆需求條件： ・日本語N1 ・NC program、CAM的基本知識 ・具備操作MasterCAM的技能尤佳 二、【日本滋賀-品質管理&技術口譯】 ◆薪資： 月額基本給：22.6万円~ (年收約335万円~460万円) ◆工作內容： ・技術相關的日語口譯與文件翻譯 ・新產品開發與導入時的品質檢討與計畫制定 ・製造流程與檢查標準的管理 ・異常或客訴時的原因分析、對策提出與客戶應對 ・技術文件（規格書、作業標準等）的管理 ・與海外據點合作，推動供應商品質改善 ◆需求條件： ・日本語N2以上/商用英文能力 ・具備切削加工圖面的專業知識且進行日語→中文/英文技術翻譯者 三、【泰國-品質管理&技術口譯】 ◆薪資： 月額： 約THB100,000(包含住宿、各項補助在內) ◆工作內容： ・ 負責確認日本及泰國國內客戶的訂單內容（規格）、進行價格協商與交期調整。 ・ 與泰國國內供應商進行談判與協調，並執行品質管理相關業務。 ※ 根據客戶提供的圖面，與供應商協商生產規格，從試產到量產的導入、品質管理與品質保證。 ・ 推動成本降低活動與業務改善活動。 ◆需求條件： ・了解切削加工圖面 ・ 具備機電一體化領域的業務經驗 ・ 具備日文能力N2以上&商用英文能力 ・可接受外派至泰國 四、【日本大阪-供應鏈管理專員<儲備幹部>】 ◆薪資： 月額基本給:35 万円~45 万円(年収:580 万円~700 万円) ◆工作內容： ・確認客戶訂單規格、價格與交期，跟進試作至量產，多數為重複訂單。 ・與國內外供應商確認發注內容，協調價格與交期，掌握整體供應鏈流程。 ・處理各項客戶需求與問題，保持良好聯繫（拜訪、線上會議、郵件、電話）。 ◆需求條件： ・具備日文能力N2以上&商用英文能力 ・具有製造業或商社工作經驗 ・具有海外供應商管理經驗 ・能閱讀切削加工相關圖面 五、【日本大阪-海外業務<儲備幹部>】 ◆薪資： 月額基本給:29万円~40万円(年収:500 万円~630万円) ◆工作內容： ・負責功能性材料的海外銷售（既有客戶維護與新規開發 主要市場涵蓋中國、台灣、東南亞、印度等。 ・與供應商協調價格與交期，執行出口安排及物流成本管理。 ・管理銷售額與利潤，並進行績效報告。 ◆需求條件： ・具備日文能力N2以上&商用英文能力

1. 光學鄰近效應修正（Optical Proximity Correction, OPC）以及電子鄰近效應修正(Electron Proximity Effect Correction) 模型建立。 2. Layout 自動化系統建立。 3. 其他主管交辦事項。

透過ASM官網投遞此職缺，將優先安排履歷審核 【English resume is required】 Please apply for this position ONLY through ASM website : https://www.asm.com/open-vacancies/snr-field-service-engineer-2?gh_jid=4592238101 ASM is recruiting for multiple FRESH GRADUATE headcount of Field Service Engineers in our ALD/EPI/PEALD/CVD business function across Taiwan include Hsinchu, Tainan and Kaohsiung. As an Field Service Engineer at ASM, you’ll have the opportunities to get involved in a wider scope of work compared to our larger competitors. While the workload is challenging, you are given the independence and autonomy to perform at your peak. This work requires thinking “outside of the box” in an innovative manner, so you must have the ability to collaborate with others to deliver creative solutions, work well under pressure and pay great attention to small details. Responsibilities: • Maintain tool uptime and ensure excellent execution of installation and support of hardware issues. • Develop, maintain, and ensure the relevance of technical information used by internal and external stakeholders. • Understand and build long-term innovative global technology systems that enable enhanced customer relationships. • Ensure communication vehicles, e.g. telephone, email, and presentation, etc. are able to facilitate efficient and consistent customer follow-up. • Drive continuous improvement of the customer experience through team, hardware, software, and support tool development. • Drive and manage new product installs and subsequent hardware development. • Projects manage new evaluations and ensure the success of the project. • Additional assigned tasks when necessary. • Business travel when necessary. • Provide end-users with training on equipment operation, best practices, and preventive maintenance to ensure proper and efficient use. • Adhere to safety guidelines and industry standards while working on-site, ensuring all activities are compliant with company and regulatory requirements. • Collect and communicate field data, customer feedback, and equipment performance insights to internal teams for continuous product and service improvement. ASM is a leading, global supplier of semiconductor wafer processing equipment. Our ambitious team is dedicated to delivering innovative technology solutions to the world’s leading semiconductor manufacturers. We have over 2,200 employees based in 16 countries, including Belgium, Japan, Netherlands, South Korea, Singapore, Taiwan and United States. Together we work to develop Epitaxy, ALD, PEALD, Vertical Furnaces and PECVD thin-film deposition technologies for our customers. Our goal is to remain an industry leader by being ahead of what’s next. We accomplish this by focusing on finding collaborative solutions to make integrated circuits, or chips, smaller, faster and even more powerful. ASM, an inclusive workplace We at ASM are a truly global organization that works diligently with an open-mind in all areas of our business. We strive for a culture and work style that fosters trust and transparency. We put our people first, and that is how we will continue to succeed. We are an equal opportunity employer and value diversity. We recognize and value the differences between individuals, including gender, ethnicity, religious beliefs, sexual orientation, knowledge and experience, work background, age, skills, amongst others. Recruiting and developing a diverse workforce provides a wide range of perspectives. This enables a culture of continuously exploring and adopting new technological ideas and innovations, and it also enables us to deliver excellent products and service to our clients.

1. To improve device yield &CIP in order to meet customer request and customer service. 2. Identify and solve process and device problems. 3. Support for customer visit and audit.

*此專案簽約一年，到期視情況另有其他方式留下，為長期職務。 ●享有福委會福利●期滿另有獎金 *資訊相關背景優先安排 1. BPM系統表單開發與維護 2. 依據企業流程變動，協助開發SAP ERP程式與外端程式對接ERP之功能 3. 公司內部其他應用系統開發與維護工作 4. 開發自動化程式 5. 完成主管交辦之任務

新竹縣竹北市環科一路1號(昌益園區) 1.半導體後段製程設備之技術支援 (以研磨技術設備為主) 2.設備安裝/維修 3.提供客戶研磨技術上的支援 4.客戶問題電話或現場對應 5.與日本原廠技師接洽並對應客戶問題

KLA美商科磊致力於維護身心障礙者就業權益，歡迎領有身心障礙手冊或證明的夥伴投遞履歷，加入KLA！ The future is ours to create. Whether it’s a driverless car, VR experience, or factory robotics, we help turn theory into possibility. We help create technological devices and ideas that transform our future and shape our current life. We’re looking for Customer Service Engineers who contributes the support and provide unique customer value in the global electronics ecosystem. You will be able to learn the advanced mechatronic engineering and collaborate with leading customers across the globe, our expert teams of physicists, engineers, and problem-solvers design solutions that move the world forward. Roles and Responsibilities • Evaluates, analyzes, diagnoses and troubleshoots technical equipment problems via telephone or at customer site. Ensures equipment improves customer production. • Repairs of system level problems (which have multiple causes and for which no standard procedures exist) at customer sites. • Represents the company to the customer and assume accountability for customer happiness with service. • Assures operational quality of system equipment. Coordinates actions with customers to minimize down time. • Provides assistance to Installation Engineer in resolving problems. • Prepares fields service reports on customer support activity and provide documentation to other supporting functions on re-occurring problems. • Build positive relationship with customers and increase customer satisfaction by resolving sophisticated requests and issues. • Contribute to the Capturing, Re-use, Collaboration, and Improvement of knowledge using available systems • Develops and handles return materials authorization (RMA) processes for ensuring customer returns, exchanges, service and repairs are done with speed and accuracy and all client/customer service delivery issues are resolved. • Executes technical critical issues with detailed problem statement and pass-down to work with system engineering technical team in customer site. • Estimated travel is 20% once trained in the classroom as part of on-the-job training program. Although, much of the job responsibilities will be performed in the office or at the customer site supporting various projects and initiatives. In addition to problem diagnosis and resolution, other support duties will include characterization and support of customer demos and field projects. *Please visit and apply on our career website: https://kla.wd1.myworkdayjobs.com/zh-TW/Taiwan/job/Hsinchu-Taiwan/Customer-Service-Engineer-Hsinchu_2102329

【部門說明】 本部門在新產品開發階段負責製程設計與驗證(Process Design & Validation), 透過DFM評估以及跨部門討論來改善產品設計, 規劃生產流程並導入大量生產。 在這裡工作可以學習到： - 縱向開發與研究先進製程技術及橫向跨部門溝通協調，會應用到設備整合的知識、產線規劃與數據分析的技巧。 - 了解SMT與機構組裝未來趨勢，研究微型化與先進製程應用。 - 運用自身工程經驗，配合DFM、PFMEA等方法，評估產品的可製造性與潛在風險，並研究新的製程、材料與設備應用。 - 垂直整合完整的工廠流程，熟悉新產品從研發到量產的所有工作，深度了解設計端與製造端的連結。 - 該職位是多面向整合的要角，需統整產品開發時的問題，透過跨部門溝通協調與整合能力，解決生產線上的品質、製程、材料相關問題。 - 研發與製造團隊間的橋樑，並與國外工程師共同合作，拓展國際視野 。 【工作內容】 - New product design review for manufacturing - Introduction of new product prototype/pilot run, verification and mass production -Evaluation, development and introduction of new materials, processes and advanced production technologies. -Abnormal quality and failure analysis and improvement. (PFMEA) -To coordinate cross function team and do risk assessment for making (consolidating) the decision of production/manufacturing -To communicate production status, issues with cross function team and lead / drive cross function team on issue solving -To handle the regular PID (Product In Development) meetings and coordinate follow-ups

1. 半導體製程維護、異常處理與改善及新製程開發。 2. 產品良率提昇、製造流程簡化及產品失敗分析。 3. 建立、改善製程條件，並監控製程結果。 4. 評估、引進、驗收新製程、技術設備及材料。 5. 執行部門計畫及規劃執行更新部門內相關製程文件。

1. 保養日常設備，維持設備正常運作並維持產能狀況及減少停機時間。 2. 判斷設備異常的原因，並排除問題。提出潛在設備問題，並提供相關預防措施方案 3. 協助日本原廠工程師在客戶現場作業或通過電話或客戶端現場評估、分析、診斷和排除技術設備問題。 4. 提供客戶正確的產品規格與應用相關資訊及產品技術諮詢，以作為客戶設計產品時的參考依據。 5. 工作需進無塵室，駐點固定為竹科，並可配合公司國內外短期出差。 6. 極具競爭力之公司薪資福利，公司薪資半導體業界前5%強，為高速成長期公司，升遷管道暢通。 7. 特休規定優於勞基法、健檢補助、年節獎金、穩定年度分紅調薪...等等

【本職缺僅接受科林研發官方網站投遞】 請至科林研發官方網站投遞個人履歷表，此職缺履歷登錄網址: https://opportunities.lamresearch.com/job-invite/189501/ The intent of this position is to support space planning and management activities for the Taiwan campus portfolio. The Occupancy Planner is part of our on-site Global Occupancy and Space Planning team and will be responsible for space planning, programming, and supporting the team in developing occupancy plans. Also, processing new hire requests, terminations, and weekly move requests, with opportunities in helping to shape and launch space management policies, standards, and processes. Responsibilities: • Build and maintain strong relationships with BU customers to provide excellent customer service • Gather programming requirements to develop project scope, schedule, and budget on office reconfigurations, move, and tenant improvement projects • Provide design layouts of new and existing office space and furniture as needed for move and tenant improvement projects • Working furniture vendors to develop move plans with space assignments, occupancy plans, and furniture reconfiguration requirements • Conduct building audits to verify that employee locations, furniture layout and room configurations are correctly noted on floor plans • Manages relocations including the development and execution of project planning activities, timing of group moves/relocations, and final relocations • Participates in the development and integration of space management tools, processes, standards, and policies to improve efficiencies • Present and negotiate with business units to implement plans aligned with corporate guidelines, including scenarios to optimize use of space while meeting business requirements

1. 機台問題現象掌握及資料收集 2. 機台問題分析與解決 3. 報告作成及整理、仕樣書交涉、Demo支援 4.社內一般事務處理 5.國內、海外設備業務支援

KLA美商科磊致力於維護身心障礙者就業權益，歡迎領有身心障礙手冊或證明的夥伴投遞履歷，加入KLA！ Technical Support Engineer (TSE) is Responsible for providing assistance to Customer Support Engineers who are diagnosing, troubleshooting, and debugging complex optical, electro/mechanical, computer systems and/or software problems. TSEs respond to challenging issues where first-line product support has been unable to isolate or fix problems in malfunctioning equipment. Responsibilities include reporting design, reliability and maintenance problems, documenting and providing feedback to HQ Tech Support, and Sustaining Eng on CIP opportunities, preparing service and postmortem reports. TSEs may also be involved in customer installation, and upgrade of equipment as well as training of KLA and non KLA personnel. *Note: Only applications with *English resume* will be considered.

What we are looking for We’re looking for a self-motivated, result-driven Application specialist who will be responsible for TW application support, reporting to Nova’s Application Team Lead. The Application specialist is a field role responsible for supporting customer’s application development on-site/remotely. The job of the position involves supplying metrology solutions, bridging the gap between field and HQ, supporting pre-sales activities, and being sensitive to technology roadmap change, joint work with HQ divisions to win key demo/evaluation activities. The role should be working closely with account team to support pre-sales activities to ensure Nova has a winning strategy. Role & Responsibilities • Supply/sustain on-site Nova tools metrology solution (OCD / XPS / Raman / SIMS etc…) supporting multiple modules, i.e., Litho/CMP/Etch/Dep. • Communicate and establish good relationship with customers for process & issue understanding. • Involve up-to-date new metrology technics / products / applications and perform pre-sales demo / presentations to customers. • Co-work with HQ or other subsidiaries (i.e., IL/US/CN/JP/SG) to develop new application solutions, able to support / work abroad. • Pro-actively maintain semiconductor knowledge from industry and international academic conferences. • Be highly sensitive in collecting market information. • Own presales activities for tools adoption/utilization. • Be flexible to cross-divisional activities per company’s requirements.

如欲投遞履歷,請上Amkor官網 https://careers.amkor.com.tw/ 1. NPI related 2.Technique support to customer 3.Process development with customer 4.Customer quality issue handling 5.Customer Audit handling

1. 半導體相關製程實務經驗 2. 與客戶進行研發項目的流程開發 3. 處理演示請求以促進設備銷售 4. 技術介紹的銷售支持 5. 與總部溝通以進行持續改進計劃 6. 其他公司交付任務 7. 需具備良好英文溝通能力 公司參考網頁: www.evgroup.com