「Assistant Engineer- Kaohsiung/Tainan (1-year-temp)」的相似工作

1.協助現場主管交辦事宜 2.維護現場環境秩序及協助調機／製程工程進行 3.需著無塵服於廠內進行工作 4.可配合輪班制 5.需配合外派出差.時間/地點依公司規定

1. 半導體設備機台的維修保養與售後服務 2. 客戶端現場(無塵室內)設備裝機、Trouble shooting、改造 3. 協助設備機台良率的改善與提升 4. 需配合加班、輪班、ON CALL對應。公司其他據點支援(國內出差/國外出差)。 5. 需具備報告及與客戶溝通對應的能力 6. 需具備良好外語溝通能力(英文或日文) *與客戶維持良好關係 *遵守客戶端工安規定 *具半導體設備經驗尤佳

We are looking for a talented Senior Engineer (with EOS, DV, DVP or Sabre3D experience will be great) to become a part of our Global Flexible Workforce Team. 1. High travel rate: 75% of the time, including international travel (could over 50%). 2. Comply with all safety procedures and demonstrate safety consistently as a value. 3. Complete the installation by consistent result with specified cycle times. Control the spending within budget. Train the local engineer to have same knowledge and skills. 4. Perform all standard installation activities from system move-in (Tier0), hardware setup (Tier1), process tuning (Tier2) independently. 5. Be able to run upon shift model as needed and perform routine preventative maintenance within established timeframes. Complete quality repairs. 6. Plan assimilation & Training: Train ramping operations (SOP, EHS), product knowledge assimilation, and conduct cross-product training during off-ramping. 7. Organize startup lesson learn with overall account team. 8. Work with site management to drive the MFG (manufacturing) quality improvement plan. 9. Diagnose and resolve technical problems. Use training and experience to identify process and software or hardware related system problems. 10. Assume responsibility to follow customer ground rules, regulations, and for complete customer satisfaction within work area. Assist in planning, communicating, and coordinating the installation plans with customer. 11. Respond to fab issues by communicating with other engineers and participating in escalation conference calls. Apply diagnostic techniques, using of documentation, and test equipment with assistance from senior engineer. May participate in projects to reduce costs and increase uptime.

1. Support for mass production test launch for semiconductor products 2. Support evaluation and analysis of semiconductor products 3. Support for troubleshooting of products produced at ASEKH 4. Maintenance of in-vehicle SLT systems 5. Supporting technical discussions between ASEKH and our engineers in Japan 6. Monitoring mass production flow and early detection of problems 7. Discussing technical issues with local OSAT members.

We are seeking a customer-focused, technically adept, and relationship-driven Customer Engagement Application Engineer to join our global team supporting KLA’s industry-leading wafer inspection and metrology solutions. In this front-line, customer-facing role, you will be the trusted technical advisor and strategic partner to our customers, driving product adoption, solving complex challenges, and building long-term relationships that fuel success. You will collaborate across functions to deliver high-impact solutions in the dynamic world of semiconductor manufacturing. Key Responsibilities: • Serve as the primary technical interface between KLA and customer, building trust and credibility through consistent, high-quality support. • Deliver applications support for KLA’s wafer inspection and metrology tools at customer fabrication facilities. • Lead customer engagements including product evaluations, new tool introductions, and drive competitions. • Drive customer success by conducting acceptance tests, recipe development, hands-on training, and pre-sales technical enablement. • Cultivate strong customer relationships by understanding their technical needs, aligning solutions, and ensuring satisfaction through onsite support . • Collaborate with customers and internal teams to co-author technical papers and present at global industry symposiums. • Develop and share Best Known Methods (BKMs), SOP ( Standard Operating Procedures ) materials, and technical documentation to empower global Field Applications teams. • Act as a cross-functional bridge, aligning customer feedback with engineering, sales, and marketing to drive continuous improvement. • Analyze complex technical issues, apply statistical methods, and deliver innovative, data-driven solutions. • Report regional insights and escalate field issues to product divisions, ensuring timely resolution and product evolution. Qualifications: • Master’s degree in Physics, Optics, Engineering, Material Science, or a related field; semiconductor process knowledge is a strong plus. • Proven experience in customer-facing technical roles, with a strong track record of building and maintaining customer relationships. • Demonstrated success in technical problem-solving, project execution, and cross-functional collaboration. • Willingness to work in semiconductor cleanroom environments. • Strong project management, leadership, and organizational skills. • Excellent presentation, communication, and interpersonal abilities. • Fluent in English, with the ability to communicate clearly via email, video calls, and in-person meetings. • Ability to manage multiple priorities in a fast-paced, global environment. Key Competencies: • Strong customer orientation with a passion for delivering value and building trust. • Advanced analytical and statistical thinking for data-driven decision-making. • Effective collaboration and communication across diverse teams and cultures. • High level of initiative, ownership, and accountability in driving results. • Resilience and adaptability in dynamic, high-pressure environments. • A proactive team player with a growth mindset and a drive for excellence. Note: Only applications with *English resume* will be considered. Please also apply through KLA Career page: https://careers.kla.com/

1. High travel rate: 70~75% of the time, including international travels. 2. Comply with all safety procedures and demonstrate safety consistently as a value. 3. Complete the installation by consistent result with specified cycle times. Control the spending within budget. Train the local engineer to have same knowledge and skills. 4. Perform all standard installation activities from system move-in (Tier0), hardware setup (Tier1), process tuning (Tier2) independently. 5. Be able to run upon shift model as needed and perform routine preventative maintenance within established timeframes. Complete quality repairs. 6. Plan assimilation & Training: Train ramping operations (SOP, EHS), product knowledge assimilation, and conduct cross-product training during off-ramping. 7. Organize startup lesson learn with overall account team. 8. Work with site management to drive the MFG (manufacturing) quality improvement plan. 9. Diagnose and resolve technical problems. Use training and experience to identify process and software or hardware related system problems. 10. Assume responsibility to follow customer ground rules, regulations, and for complete customer satisfaction within work area. Assist in planning, communicating, and coordinating the installation plans with customer. 11. Respond to fab issues by communicating with other engineers and participating in escalation conference calls. Apply diagnostic techniques, using of documentation, and test equipment with assistance from senior engineer. May participate in projects to reduce costs and increase uptime.

Your Role: -Sufficient capacity of team management to leading onsite team for daily operation. -Carry out tasks in conjunction with Edwards Best Operating Practice. -Good communication skill to cooperate with functional team internaly. -Customer relationship build up, work cloesly with customer in customer site. -Understand customers' requests and feedback to Service Manager. -Provide regular reports and status of activities. -Required to actively participate in ongoing improvement in the standard of our health, safety and loss control management systems. -Provide feed back on safety issues affecting your place of work or with Edwards’ equipment. -Required to work both as part of a team and on your own, self motivated and self disciplined and a customer sensitive approach to work is required. To succeed, you will need: Skills and experience -Experience in field service activities also familiar product knowledge. -Experience of working with Computers with specific knowledge of Microsoft Office software. -Good command of both written and spoken English is an advantage. -Understanding of engineering drawings, both electrical and mechanical, and schematic layouts is essential. -Working in the areas of electro-mechanical assembly and fitting, electrical/PLC controls and electronics will be required. -Key competence required for the role. -Soft skill is required for team leading and communications. -Inter-personal and communication skills are required in order to build sound relationships with customers. -A good understanding in a relevant engineering discipline.

★大豐環保為全台大型環保產業，專業車隊近百台規模，制度健全! ★勞健保依法依薪資提撥，保障您的退休生活！ ★每月均薪58,000(含加班費，安全作業獎金）、年終獎金、證照津貼另計！ ★每月提供大量零食飲料，容易發胖，請小心肚肚！ ★免費員工制服（冬季、夏季）/外套/背心/安全鞋，保障員工真正的安全。 ★公司全額負擔完整車輛保險，保障員工出車在外的安全!!! 1.站區資收物載運作業 2.客戶資收物載運服務 3.配合主管交辦事項 4.工作態度配合度高 【福利制度】 1.年終獎金及利潤分享之獎金制度 2.結婚、生育、新居落成、住院及喪葬等各項獎補助 3.生日禮金及年節禮金(品) 4.家庭日、節慶活動及員工旅遊 5.員工年度健康檢查 6.完整的教育訓練及職涯規劃 7.補助職能所需證照考照及輔導流程

1. Familiarized with final testing process optimization.熟悉final testing的作業。 2. Modified machine capability/function to meet planning schedule for any conversion of part number or package change根據生產計畫需求，針對品號轉換或封裝變更，調整機台功能與性能。 3.Debug owner machine problems routinely & review machine troubleshooting record daily and provide immediate action to meet production output負責機台日常除錯作業，每日檢視機台故障紀錄，並即時採取對應措施，以確保生產達成。 4.Efficiently produce/control spare parts to sustain machine smooth running through tool life span evaluation, overhaul, PM & calibration. 有效控管備品管理，透過工具壽命評估、大修、預防保養（PM）與校正，確保機台穩定運行。 5.Testing the machines: POWERTECH 4100A, TESEC 4324-KT, and Agilent 4284A.操作測試機台設備，包括 POWERTECH 4100A、TESEC 4324-KT 以及 Agilent 4284A機型 5.Install and buy off new equipment to expend package capacity and sustain new process/product implementation 安裝並完成新設備的驗收流程，以擴充封裝產能並支援新製程與新產品的導入。 6.Familiarized with COHU NX-16/ NY-20/NY-20 machine conversion and problem solving熟悉 COHU NX-16、NY-20 等機台的轉換作業與問題排除。

The future is ours to create. Whether it’s a driverless car, VR experience, or factory robotics, we help turn theory into possibility. We help create technological devices and ideas that transform our future and shape our current life. We’re looking for Customer Service Engineers who contributes the support and provide unique customer value in the global electronics ecosystem. You will be able to learn the advanced mechatronic engineering and collaborate with leading customers across the globe, our expert teams of physicists, engineers, and problem-solvers design solutions that move the world forward. Roles and Responsibilities • Evaluates, analyzes, diagnoses and troubleshoots technical equipment problems via telephone or at customer site. Ensures equipment improves customer production. • Repairs of system level problems (which have multiple causes and for which no standard procedures exist) at customer sites. • Represents the company to the customer and assume accountability for customer happiness with service. • Assures operational quality of system equipment. Coordinates actions with customers to minimize down time. • Provides assistance to Installation Engineer in resolving problems. • Prepares fields service reports on customer support activity and provide documentation to other supporting functions on re-occurring problems. • Build positive relationship with customers and increase customer satisfaction by resolving sophisticated requests and issues. • Contribute to the Capturing, Re-use, Collaboration, and Improvement of knowledge using available systems • Develops and handles return materials authorization (RMA) processes for ensuring customer returns, exchanges, service and repairs are done with speed and accuracy and all client/customer service delivery issues are resolved. • Executes technical critical issues with detailed problem statement and pass-down to work with system engineering technical team in customer site. • Estimated travel is 20% once trained in the classroom as part of on-the-job training program. Although, much of the job responsibilities will be performed in the office or at the customer site supporting various projects and initiatives. In addition to problem diagnosis and resolution, other support duties will include characterization and support of customer demos and field projects.

• Define process flow, requirements and specifications and verify through Design of Experiment (DoE) to optimize current machinery performance • Discuss with customers about the conceptual process design of new product and the enhancement of existing products’ process design • Support on-site process optimization and/or trouble-shooting through engineering evaluation to meet customer requirements • Debug the machinery functions to ensure meeting customer requirements and conduct process analysis to study the parameter test results from DoE for process optimization • Support internal machinery optimization before buy-off • Test the samples provided by customers for bonding

1.提供客戶處安裝機台。 2.檢修維護及保養機台設備。 3.工科背景，無經驗可，歡迎大學新鮮人加入。 4.具完善的職務培育及訓練。 5. 需搬重，依照零件大小，重量10~40公斤都有， 大約30公斤以上會2人一起搬重 6. 主管交辦事項 * 可接受手機值班&on call * 可配合出差或願意轉調至其他據點(新竹、台中、台南) ⭐公司享有每年度調薪、三節獎金、各項獎金...等福利

Technical 1. Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam's complex electro-mechanical and electronic systems at customer sites. 2. Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions. 3. Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification. 4. Maintain records and reports to coordinate activities between Lam and the customer. 5. Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction. 6. Transparently discuss opportunities and challenges with customer to increase trust. 7. Update customer on status of Lam tools as needed. Leadership 1. May Provide on-site instruction to sub-contractors and customers. Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2. Shadow more experienced engineer at customer site

Process Evaluation Support 1. Tool operation, experiments setup 2. Data analysis & report 3. Evaluation planning Field Service Support 1. On site troubleshooting 2. CMP Tool application 3. Recipe tuning ※需配合加班。 ※具JLPT N2 or TOIEC 650分以上尤佳。 ※需配合國內外出差。 ※自備汽車尤佳(另有每月車輛津貼及交通費補助)。 ※需自備英、日文履歷。（擇一即可） ※錄取後需先至新竹湖口工廠教育訓練(1~3個月)，後至台南教育訓練(約半年)。

【本職缺優先審核至應用材料公司官網投遞人選】請至應材官網上傳履歷表： Talents who apply job through Applied Materials Career Website will be reviewed and considered as top priority Please apply job here:https://careers.appliedmaterials.com/careers/job/790294586037 投遞此職缺即會被納入台灣應用材料人才庫，未來若有合適機會人資將主動與您聯繫。 ■ Key Responsibilities 1. Utilize basic electrical/mechanical assembly skills in assigned assembly tasks of display tools 2. Perform simple writing, soldering and/or calibration tasks as assigned. 3. Perform other duties and/or completes training as requested by Supervisor. 台灣應用材料公司，台南顯示器製造中心，因訂單需求，場內徵求數位測試助理工程師 ■ 測試工作內容 1. 依電路 & 機械組立圖執行設備測試與系統整合工作 2. 機台功能確認、真空測漏、保壓測試、設備通電前檢查 3. 依文件要求執行生產相關作業和填寫執行紀錄 4. 依要求完成訓練、部門工作與主管指派任務

Legal entity: SAFC Work Location: Kaohsiung We are seeking a skilled Digitalization & Automation Engineer with experience in the OT (Operational Technology) system to join our team. The ideal candidate will have at least 3 years of relevant experience, and the successful candidate will be responsible for implementing and maintaining automation systems, optimizing digital solutions, and driving the digital transformation of our operations. This role requires a deep understanding of industrial automation systems, digital technologies, and the ability to work cross-functionally to enhance operational efficiency. Your Role: · System Design: Design, configure, and implement Basic Process Control Systems (BPCS), Safety Instrumented System (SIS), PLC and SCADA for manufacturing plant process control. · Digitalization Enhancement: Collaborate with engineering and production teams to design and develop digital solutions that improve production processes, reduce downtime, and enhance overall plant performance. Lead the digitalization efforts by deploying Industry 4.0 technologies, IoT sensors, data analytics, and cloud-based solutions to enhance operational insights and decision-making. · Data Literacy: Monitor and analyze data from automation systems to identify areas for improvement and implement appropriate solutions. · Troubleshooting: Troubleshoot and resolve automation and control system issues, coordinating with vendors and other teams as necessary to ensure minimal disruption to operations. · Documentation: Develop and maintain technical documentation related to automation systems, digital solutions, and project deliverables. · Collaboration: Work closely with multidisciplinary teams, including process engineers, instrumentation engineers, and Production Team to optimize system performance. Who You Are: · Bachelor's degree or higher in Electrical Engineering, Computer Science, or related engineering field. · Minimum 3 years of relevant experience in DCS/PLC/SCADA design and implementation, preferably in process industries such as oil and gas, chemicals, or pharmaceuticals. · Strong understanding of Industry 4.0 technologies, IoT integration, cloud computing, and data analytics. · Proficiency in control system design software and programming languages, strong analytical and problem-solving skills, and effective communication abilities. · Experiences in data analytics, programming is a plus. · Proficiency in English is considered a plus for effective communication. Additional Information: We welcome international candidates and non-native Chinese speakers. While proficiency in Chinese may be beneficial for certain roles, it is not always required. We encourage all qualified applicants to apply, as we value diversity and the unique perspectives each individual brings.

Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision 8. Perform other related duties as assigned by senior FSE / supervisor Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site

1. 設備維護與故障排除 　Equipment maintenance & troubleshooting 2. 設備預防性維護與校準 　Equipment Preventive Maintenance & calibration 3. 設備正常運作時間/利用率維護與改進 　Equipment Up time/utilization maintenance and improvement 4. 處理改善與成本節約項目 　Handle projects of improvement & cost saving 5. 工作時間 Working hours 　◎夜班 Night shift 20:30PM~08:30AM 　◎星期日、一、五、六工作 ( 4 days work : Fri, Sat, Sun, Mon ) 　◎星期二、三、四休息 ( 3 days off : Tue, Wed, Thu )

1.Design the test tooling for the function test or In-circuit test. 2.Develop and implement automated test scripts using scripting language, such as C/C++/Python/shell/batch. 3.Evaluate the product designs and build the manufacturing test processes, fixtures. 4.Improve test processes and enhance efficiency, consistency, cost avoidance. 5.Deploy new device test capabilities and provide training at manufacturing sites. 6.Develop manufacturing test equipment specifications; lead equipment build and validation 7.Research and develop test solutions to enable new technology on new product introductions. 8.Collaborate with Electrical Engineering during product bring-up to create and develop test plans and automated test sequences or scripts for testing products at Printed Circuit Board Assembly (PCBA) level 9.Provide hardware debug mentorship to Test engineers and Product engineers.

志同道合的人才 是德技公司最珍貴的資產。 秉持此理念 我們努力經營高度自由、健康的工作環境；提供同仁最有競爭力的整體薪酬 我們備有完善的教育訓練制度 並同時有學習及職涯成長的空間； 對銷售業務有高度熱忱勇於挑戰自我的你/妳, 歡迎加入德技團隊 ! ▲ 工作內容 1. 開發潛在客戶，拓展市場，以達成業績目標。 2. 在銷售過程中説明公司獲取相關產品的市場訊息並及時回饋。 3. 負責國內業務接洽及訂單處理。 4. 負責產品報價及產品展示，並處理帳款回收相關事宜。 5. 負責業務推展，傳達及說明公司各項業務重大訊息、活動及產品。 6. 進行商品行銷，產品特色分析介紹，並提供產品購買的建議。 ▲ 職位要求： 1. 大學或專科學歷（含應屆畢業生），理工類相關科系畢業。 2. 具備良好的英文說/讀/寫能力。 3. 熱愛銷售業務工作，有挑戰精神，學習能力強，能承受工作壓力，勇於承擔責任。 ▲福利待遇： ◆ 保障年薪13個月, 年度績效獎金，每年固定依個人績效調薪。 ◆ 公司為員工提供完善的培訓計畫和提升發展空間，安排優秀員工出國培訓。 ◆ 彈性上下班, 不需打卡 。 ◆ 勞保、健保、勞工退休金提撥（公司依法提撥6%之勞工退休金）。 ◆ 周休二日、帶薪年假、帶薪病假(3天/年)、不補班。 ◆ 國內/外旅遊補助及年終尾牙（摸彩）、不定期團隊活動。 ◆ 婚喪喜慶禮金及奠儀。 ◆ 生育津貼。

***Please upload English resume onto our official platform: https://nxp.wd3.myworkdayjobs.com/zh-TW/careers/job/Kaohsiung/XMLNAME--New-Graduate-Hiring-Environmental-Health---Safety_R-10059713 Job Description Key Responsibilities: 1. Contractor & Employee Safety Programs - Develop and manage contractor EHS programs. - Conduct EHS training to raise awareness among employees and contractors. 2. Site Audits and Risk Assessments - Conduct regular inspections and risk assessments at the workplace. - Identify potential hazards and recommend corrective actions. 3. Incident Investigation and Emergency Response - Investigate workplace injuries. - Develop and implement emergency response plans. 4. Regulatory Compliance and Reporting - Liaise with government agencies and handle audits or inspections. - Ensure compliance with local safety & health regulations and RBA requirements. - Prepare and submit required documentation and reports. 5. EHS Management System (ISO 45001/14001) implementation Qualifications: 1. Minimum 1 year related working experience in factory would be a big plus. 2. A qualified candidate must possess the Level B Occupational safety and health management personnel Certificate (乙級職業安全衛生管理員) 3. TOEIC 500 and above is a plus. 4. Familiar with MS Office. 5. With good communication skills and attention to detail.