「SI訊號驗證量測工程師」的相似工作

1. 訊號完整性模擬(PreSim and PostSim) 2. 電源完整性模擬(DC Drop/AC impedance/DeCap Optimization) 3. 針對PCB Layout提出建議。 4. 模擬與量測結果分析驗證。

1.SI/PI量測與模分析 2.網路分析儀與探針平台操作 3.量測與模擬數彙整 4.機台操作：網路分析儀 5.專業知識需求：電磁學、微波工程、SI/PI理論分析

1.PCB stack-up design & Constraint Rule setting. 2.Provide SI/PI design suggestions for PCB layout. 3.Signal integrity analysis of high-speed and low-speed signal interfaces. 4.Power integrity design includes DC impedance, AC resonance and capacitance optimization. 5.In addition to Cadence 2.5D EM solution as a daily necessary software, AMD SeaSim/S2Eye, Intel ICAT/IMLC/CCT are also required. 6.Use TCL and Python to shorten the complicated software operation process, generate reports and perform DOE analysis. 7.Familiar with PCB test coupon TDR/TDT measurement and Delta L 4.0 Measurement.

主要工作內容及責任簡述： 1.負責跨部門測試驗證專案之排程管理與客戶溝通相關事宜 2.負責紅墨水及應力測試之工程討論、結果回報、報告撰寫及AI判定專案執行工程人員 3.相關實驗室設備例行保養及點檢等項目

1. 高/低速訊號完整性量測與分析 2. SI/PI量測與模擬分析 3. 產品故障分析 4. 量測報告整理與撰寫 (EVT & DVT Report) 5. 撰寫量測SOP 6. 儀器設備校正與維護 7. 其它主管交辦事項

1、3C資訊產品的檢測與認證服務事務 2、EMC檢測服務 3、RF檢測服務 4、各場地輪調學習 5、能配合加班及調整班別 6、公司提供中餐 7、電子電機相關科系畢業者佳，並依學經歷擇優敘薪 8、亦歡迎非理工科系新鮮人

職務內容： 我們正在尋找一位細心負責、具備技術背景的裝機及交機工程師，主要負責企業客戶PC或NB的安裝與交付作業。此職位需要與客戶端緊密合作，確保符合客戶標準流程，並能夠依照使用者需求進行設備交機。 主要工作職責： 1. 依照客戶標準流程，在HP品牌PC或NB上安裝Windows作業系統，確保系統環境符合使用需求。 2. 設備安裝與測試，確保所有必要的驅動程式、應用程式及設定均正確配置。 3. 與使用者或客戶協調交機時間，準時交付設備，並進行必要的簡單操作說明與確認。 4. 處理基本技術問題，確保裝機與交機過程順利，如有異常狀況需即時回報與處理。 5. 維持良好客戶關係，確保提供專業且高品質的服務，提升客戶滿意度。 職位要求： ** 具備基本IT技術背景，熟悉Windows作業系統的安裝與設定。 ** 具備PC或NB硬體與驅動程式安裝經驗，有相關工作經驗者尤佳。 ** 具備良好的時間管理能力，能夠依照客戶時程安排交機作業。 ** 具備良好溝通能力與客戶服務精神，能與客戶及使用者進行有效溝通。 ** 具備基本故障排除能力，能針對安裝過程中可能發生的問題進行簡單診斷與解決。 ** 具備責任感與細心態度，確保裝機品質與交機準確性。 ** 能夠適應需外派至客戶端執行任務的工作模式。 加分條件： ** 具備IT相關學歷或技術證照（如MCSA, CompTIA A+）者佳。 ** 曾有企業級IT服務經驗，熟悉大型企業IT環境者尤佳。 ** 具備基本網路設定與企業端帳戶管理概念者佳。 福利與發展機會： ** 具挑戰性的企業客戶專案，累積寶貴經驗 ** 提供專業培訓與進階技術學習機會 ** 具良好升遷與內部發展機會 如果您對電腦裝機與企業IT服務有興趣，並希望在專業的環境中成長，我們誠摯邀請您加入我們的團隊！ 請投遞您的履歷，我們期待與您聯繫！

1.高速訊號應用趨勢研究 2.新材料驗證與測試 3.電性design rule建立 4.Technology roadmap建立 5.高速訊號設計專利資料收集&研究 6.客戶高速訊號應用對應與回饋

【工作內容】: • 開發 Windows 平台測試工具，用於驗證開發板與外部連接器之間的硬體介面功能。 • 撰寫自動化測試流程，支援 CAN bus 測試，包含 bit rate 設定（2Mbps / 1Mbps / 500Kbps）。 • 使用 MKS Canable v2.0 Pro 或其他 CAN dongle 進行測試驗證。 • 與韌體團隊合作，整合測試工具與 MCU 韌體功能。 • 撰寫測試文件與報告，支援產線與研發階段的測試需求。 【加分條件】: • 熟悉 USB / Serial 介面測試。 • 具備 汽車通訊協定（CAN-FD、K-Line） 驗證經驗。 • 有 產線或量產測試工具開發經驗。

* 提供外縣市員工免費宿舍 * 1. 執行無線產品(射頻RF)與通訊產品(Telecom)檢測業務 *測試項目：966 Chamber、RF Chamber、oven、Adaptivity、DFS……等 2. 測試數據結果分析、報告解讀 3. 客戶測試問題回覆及提供技術諮詢 4. 各國法規的閱讀與研討 5. 儀器之操作、保養、維護、校正及相關資料之登錄 * 月薪依學經歷核定 * 年薪保障14個月 + 輪班津貼(若有輪值) + 績效獎金 (每半年視集團營運與個人績效發放)

- 執行數位電視廣播設備、網路設備等產品功能測試與系統整合測試 - 執行產品標準認證程序與測試 - 設計並實作各類自動測試項目 - 規劃與負責產線測試計畫與側項 - 協助開發、除錯與測試等相關工作

a. SI訊號/PI電源完整性模擬分析 (Pre-Layout & Post-Layout) b. PCB/Layout設計建議與Guideline制定 c. SI/PI/EMI新技術專研與導入

1.負責 Probe Card（探針卡）之測試、維護、校正與效能驗證 2.進行 RF 高頻測試（含S參數、插入損耗、回波損耗、訊號完整性等量測） 3.分析測試數據，針對異常情況進行失效分析（FA）並提出改善方案 4.支援新產品導入（NPI）測試流程開發與驗證 5.協助開發與優化測試治具、負載板（Load Board）與測試程式 6.撰寫測試報告、建立標準作業流程（SOP）

THE ROLE The Lead Signal Integrity Engineer is a technical leader responsible for advancing Isola’s laminate materials to meet and exceed high-speed electrical and signal integrity (SI) performance requirements. This role provides mentorship and direction to the Signal Integrity team in Taiwan, drives innovation in SI test methodologies, and ensures strong technical engagement with global OEMs. The Lead serves as a recognized authority in SI, bridging customer needs with material performance and representing Isola in the high-performance electronics community. KEY RESPONSIBILITIES: Customer-Facing Technical Support: • Lead technical engagement with OEMs and direct customers on high-speed laminate characterization. • Act as primary technical contact for SI-related design validation and adoption cycles. • Oversee the creation of technical reports, white papers, and collateral for internal and external use. Strategic & Technical Leadership: • Define and develop advanced SI measurement, modeling, and simulation methodologies. • Collaborate with Product Management, R&D, and Sales to ensure alignment of SI capabilities with product strategy. • Represent Isola as a thought leader through publications, conferences, and industry forums. Organizational Management: • Mentor, guide, and grow the Taiwan-based Signal Integrity Engineering team. • Establish scalable, cost-effective SI test methods that accelerate R&D and customer response. • Drive alignment with global Application Engineering teams to ensure best-in-class technical service. Technology & Standards Thought Leadership: • Maintain expertise in SI methods, PCB processing effects, and high-speed digital design requirements. • Contribute to industry standards development and support customer forums on SI requirements. QUALIFICATIONS & EXPERIENCE • 8+ years of experience in signal integrity engineering, PCB laminates, or high-speed design. • Expertise in VNA measurements, probing techniques, and advanced SI methodologies. • Experience with PCB manufacturing and processing effects on SI performance. • Demonstrated leadership and mentoring experience. • Proven record of technical publications, white papers, or conference presentations. EDUCATION • PhD or Master’s in Electrical Engineering or related field required. OTHER CONSIDERATIONS • Fluent in English – required for global communication and technical documentation. • Proficiency in Mandarin Chinese – strongly preferred for engagement with Taiwan/China teams and customers. • Ability to travel regionally and globally as needed.

1. 高速通訊用Cable產品驗證 2. AOC產品測試,資料彙整和報告製作（誤碼率量測/眼圖量測 ) 3. DAC產品測試,資料彙整和報告製作（S參數量測/阻抗量測 ) 4. AOC/DAC產品性能調整和相容性驗證 5. AOC/DAC產品規格研讀並製作報告 6. 協助進行產品電路的SI模擬和實作的交互驗證 7. 協助進行電路設計驗證和改良 8.其他主管交辦事項

1. Solidworks繪圖與ANSYS Fluent/ANSYS CFX操作 2. 大型乾燥系統設計以及熱流場模擬分析 3. 二相流(固-氣系統)與顆粒追跡分析 4. 熱流場改善與多物理場耦合分析 5. 分析結果數據整理與實驗驗證

1. 進行訊號完整性與電源完整性(SI/PI) 模擬與優化分析 2. 執行SI實體卡測試量測與結果分析 3. 完成其他主管交辦事項

1.天線設計與開發,評估分析。 2.天線性能量測。 3.電路matching 調適與設計。 4.BOM表 Release ,設計報告與分析。 5.協助設計導入生產。

About Ubiquiti At Ubiquiti Inc., we create technology platforms for Businesses, Smart Homes, and Internet Service Providers, driven by our goal to connect everyone, everywhere. To date, Ubiquiti has shipped over 100 million devices worldwide, from ISP networking products to the next generation of IT solutions. Our growth is made possible by the dedicated team of hundreds behind the scenes. From software developers and product managers to designers and strategists, Team UI is driven to achieve our common goal: Rethinking IT. At Ubiquiti, you’ll heighten your potential and broaden your horizons, all while shaping the future of connectivity. Responsibilities - Perform electrical validation of high-speed interfaces such as PCIe Gen3~Gen5, Ethernet (802.3 10G/25G/100G/400G), DDR4/5, SATA, and USB3 - Perform electrical validation of low-speed interface, including I2C, SPI, MDIO, eMMC, and RGMII. - Perform chip-to-chip SerDes signal validation, including SGMII+, UXSGMII interfaces. - Plan and execute power testing strategies for multiphase power stages and DC buck converters. - Perform power integrity validations, including ripple noise analysis, power sequencing verification, electronic load (E-load) operation, and power supply unit (PSU) evaluation. - Develop and execute test scripts under Linux environments, familiar with shell commands and automation scripting. - Collaborate with the HW team and chip vendor to define and document SI/PI validation plans and requirements. - Analyze and identify SI/PI issues, and work closely with HW, FW, layout teams, and chip vendors to develop improvement solutions that enhance electrical performance and signal integrity quality. Requirement - Solid experience with SI test equipment (oscilloscope, BERT, VNA, TDR). - 3+ years of hands-on experience in Signal Integrity, and SerDes/PCIe/USB/DDR validation. - Solid understanding of compliance testing methodologies, eye diagram, and litter analysis. - Strong understanding of low-speed interface protocols and comprehensive experience in AC/DC characteristic validation. - Bachelor’s/Master’s degree in Electrical Engineering, Electronics, or related fields. - Excellent problem-solving skills, ability to debug SI/PI issues, and strong cross-functional communication with HW design and layout teams. Preferred Qualifications - Experience working on system-level signal validation in server, networking, or storage platforms with high-speed interfaces. - Familiarity with Power Integrity validation, including power sequence, ripple noise, OCP, and SCP testing. Benefits - International work environment and collaboration with global development teams - Excellent work conditions - Competitive package: great pay, perks, and benefits - Group insurance and health coverage - Flexible working hours and patterns - Complimentary drinks and snacks at the office

【產品線描述】 資料傳輸高速介面 IC 開發與驗證 包含 USB 3.2, USB4, PCIe, DisplayPort等協議 【工作說明】 包含下列一項或多項： 1. 高速介面 IP 規格制定、驗證與偵錯 2. 高速介面產品 PCB 硬體規劃及設計，包含開發階段的板子，以及提供給客戶的公板 3. 協助產品通過相關硬體規範與認證 4. 協助客戶產品開發 5. High Speed Protocol Electrical CTS 認證 6. High Speed Protocol Link CTS 認證 【必要條件】 1. 熟悉高速示波器操作 2. 具備電子電路設計能力 3. 熟悉OrCAD, PADS或Allegro等設計工具