英商美棣有限公司台灣分公司

This is a good opportunity to join a startup company working in UWB and Radar product. Co-work with ASIC design team for product development competive salary and startup package 工作內容: 協助演算法驗證和產品驅動程式開發 協助產品測試 具備條件: -具3年以上韌體相關經驗 -具嵌入式裝置韌體、晶片驅動程式開發經驗 -具備ARM MCU 單晶片基礎程式經驗 -熟悉常用晶片介面I2C SPI UART 和人機介面(USB to PC) -能理解硬體晶片之datasheet及電路設計圖 -具備相關量測儀器除錯經驗 (邏輯分析儀 頻譜分析儀 ) -有FPGA使用經驗,了解基礎Verilog RTL 語言能力佳 -有Labview 儀器自動化經驗或願意學習者佳

Key Responsibilities (at least one of the following **): - Design of RF building blocks: synthesizer, LNA, PA, mixer - Design of analog or digital filter circuits - Design of ADC, DAC, and amplifier circuits - Supervise and verify layout - Design, verify, optimize, debug, and document circuit blocks and transceivers - Test and debug circuit designs Preferred Skills and Qualifications (not all required **): - Understanding of discrete-time and continuous-time signal processing - Experience with behavioral modeling (Matlab, Verilog, or Verilog-A) - Knowledge of CMOS device and inductor modeling - Awareness of layout and packaging effects such as crosstalk and power noise - Experience in IC testing and debugging - Familiarity with Cadence Virtuoso, Spectre RF, and EM simulation tools

1. 協助安排公司晶片由FAB投片，IC封裝、CP/FT 測試及配合出貨日期 2. 與RD溝通 了解並改善測試項目 分析異常現象 3. 撰寫晶片測試計劃及測試報告書。 4. Load board/socket/probe 等硬件協助分析,並做co-relation 5.協助晶片可靠度測試與分析,提升出貨品質 [需求] 1.了解IC 製程和封裝測試流程和晶圓級FlipChip流程 2.對ATE機台有經驗熟悉 3.基礎測試軟體 和C/python 語言 4.基礎硬件loadboard debug 能力

Design RF schematics and layouts at the board level, collaborating closely with IC design engineers. Perform RF performance verification and failure analysis to ensure system reliability. Support production engineering in setting up production lines, including load board design, and work to improve production yield. Apply strong understanding of impedance matching and signal integrity in board-level design and debugging. (Preferred) Experience in antenna and RF filter design. Provide technical support to customers regarding RF hardware issues. Required Tools: OrCAD, PADS Preferred Qualifications Experience with RF test instruments such as VNA, spectrum analyzers, etc. Experience with New Product Introduction or mass production support is preferred. Good communication skills and a proactive attitude in cross-functional collaboration.

We are looking for an experienced and hands-on RF Application Engineer Team Lead with a strong background in RF hardware design. This role requires both technical depth and leadership capability to coordinate cross-functional efforts from design to implementation. Key Responsibilities *Lead and support RF hardware application design, with expertise in areas such as impedance matching, signal integrity, antenna design, and RF filters. *Work closely with internal IC/RF design teams and external partners to integrate and optimize RF solutions. *Take ownership of project coordination, milestone tracking, and cross-functional communication. *Provide hands-on support in hardware testing, validation, and troubleshooting. *Mentor junior engineers and assist in building the AE team’s technical capabilities. (Good to have) Experience in embedded MCU firmware development and C++ programming. *Communicate effectively in English at an intermediate level or above for project coordination and customer engagement. Required Tools & Skills *EM Simulation Tools *OrCAD / PADS (PCB Design Tools) *C++ (for firmware/debug integration, if applicable)

1. PCB layout. 先進晶片焊接 2. 實驗室管理 備料 3. 電路板故障排除 4.支援簡單測試 並與RD溝通

This is a good opportunity to join a startup company working in UWB and Radar product. Co-work with ASIC design team for product development competive salary and startup package 工作內容: - 協助 Radar 定位演算法DSP實現及其驗證 - 協助數位晶片Serial介面(I2C/SPI)開發 - 協助產品驅動程式開發和相關測試 具備條件: - 具3年以上Digital IC design或FPGA開發相關經驗 - 熟悉RTL coding、simulation & synthesis流程及其開發工具使用 - 具C/C++ coding 和 debug 能力 - 能理解基礎數位運算原理如FIR IIR cordic佳

英國在台分公司需要並陸續聘請[*數名行政人員成為一個團隊*]處理以下工作內容: 1.協助公司及主管日常業務執行、記錄每天日誌 2.採購並記錄公司所需用品 3.記錄公司購買日用品及其他用品的發票，建檔並做的簡易報告 4.公司零用金管理及記錄(協助請款、檢查發票、收據等) 5.行政庶務支援及安排(銀行、郵局等)，*需要摩托車駕照，會開車更佳 6.在公司接待客人、接電話 7.整理公司環境 (*不用打掃及洗廁所) 及 安排會議室使用 8.操作電腦 : 基本文書處理、制作報告、EXCEL等 *.主管交待辦事項處理 我們希望同事們都有以下的特質: *精通其他電腦軟體、Google 文書、試算表、Word、Excel、Power Point、Canva. *對工作熱情積極、謹慎細心 *願意學習，能夠發現問題並尋求解決辦法 *因外商公司會有不同國家的外賓會來公司，我們希望行政們都不怕與人接觸，性格外向 *有幫助別人的想法、有顆善良的心並會遵守法律 加分項目: *在外商或其他電子/資訊公司的工作經驗 *有歐洲留、遊學經驗 *會英文或其他外語 *有會計及其他特長 *可以提出對公司有用及可以改善的建議 *我們依台灣法令會提供各類福利，包括勞健保等 *你有自己的座位和辦公桌 *每季度會有調薪考核，表現優異會加薪 *彈性上下班時間 *每年分紅、奬金 *公司有提供飲料、零食、微波爐、洗手台、冰箱 熟悉我們公司後，你可以嘗試不同職位的的工作，適合的都可以晉升到其他不同部門的職位，如會計及財務助理、主管助理、進出口、銷售部、市場部們等。視工作範圍及應付能力，起薪點可達四萬至六萬。 如果你是一位會尊重自己、尊重你的工作及有責任心的人，我們期待你的申請，我們也希望給你一個未來及一份薪優、穩定及一個你喜歡的工作。 如你有預約到來我們公司面試，請準備好介紹自己的內容，我們需要你現場表達。中文可以，有英文更加分。