Molex Taiwan Ltd._台灣莫仕股份有限公司

【Molex--2025 校園徵才活動】 ▶3/ 15 (六) 國立陽明交通大學-校園徵才博覽會( 攤位137) ▶3/ 22 (六) 國立清華大學-校園徵才博覽會 ( 攤位E91) 【招募職缺】 1. Engineer, SI/Hardware (新竹) Job Content: RF design and simulation for high-speed module PCB and Siliconphotonics PIC Education: Master or above major in electromagnetic, microwave or EE 2. Engineer, Siphotonics PIC (新竹) Job Content: Siphotonics PIC design/ layout/ characterization Education: Master or above major in Electro-Optical Engineering, or relevant 3. PDE Intern(三重/台北) Job Content: Design flexible printed circuits (FPC) from RFQ costing to mass production and supporting manufacturing document generation. Education: Bachelor of Electrical Engineering or similar (interest or experience for FPC design, preferred tools: ViewMate, ODB++, Siemens NX CAD) 4. Layout Engineer(三重/台北) Job Content: Layout design for flexible printed circuits (FPC), including technical design details for customer needs and manufacture capability. Education: Bachelor of Electrical Engineering or similar (experience with layout, preferred tools: Allegro or AltiuM) 5. Engineer (Intern), Production/ IE(三重/台北) Job Content: IE: production cost analysis, efficiency and productivity baseline monitoring and improvement Production: line leader and area supervisor training and internship Education: Bachelor of Industrial Engineering, Statistics or similar fields 6. ME Engineer(三重/台北) Job Content: Flexible printed circuits (FPC) New machine qualification, Process validation, Process capability development for new manufacturing generation Education: Bachelor’s degree in electrical engineering and chemical engineering or similar field 7. Process Automation Engineer(三重/台北) Job Content: Flexible printed circuits (FPC) New automation machine evaluation and development Education: Bachelor’s degree in technical or engineering field Experience in the software design of industrial automation 8. Optical Engineer (WSS)(新竹/新店) Job Content: 1. WSS Product development 2. Optical design 3. Optical component support 4. Bench top LAB optical table work Education: 1. Master/ PhD in Optical related field 2. Optical table / bench work experience, accurate optical alignment experience 3. Optical design / ZEMAX experience (Prefer) 9. Engineer, Firmware (WLM)(新店) Job Content: 1.Work in the product engineering team for firmware design and/or verification. 2.Write/review on the firmware specification and the related documents. Education: Master or above major in Computer Science, Software or Electrical Engineering 10. Engineer, Product Design (Optical Connectivity)(新店) Job Content: 1. Develop protocols and perform product verification and validation testing, build and test prototype designs for proof of concept. 2.Communicates product progress and facilitate decision-making with the core team and throughout their relevant functional organization. Education: 1.Bachelor’s degree above in mechanics or related field. 2.Good ability to use relevant drawing software such as Solid work, NX, Pro-E or CAD for mechanical structure handling 11.Assistant Engineer, Product design(Cage)(淡水) Job Content: Assist in the development, process control, 3D model, 2D drawing and BOM data generating and coordination of functional teams Education: Master or above major in mechanical related 12.Assistant Engineer, Product design(Internal Cable)(淡水) Job Content: Assist in the development, process control,3D model, 2D drawing and BOM data generating and coordination of functional teams Education: Master or above major in mechanical related 13.Assistant Engineer, PDE (NPD)(淡水) Job Content: Assist in product development, Ex: CAD/3D/experiment Education: Master or above major in Mechanical or Thermal/Materials engineering-related. 14.Associate Sales Engineer (2025 Talent Program) (淡水/信義區) Job Content: Design in Molex products to customers Education: Bachelor’s or Master’s Degree

Molex possesses a rich heritage in the optical industry. We provide the highest performing and field-proven wavelength management solutions from components, modules to integrated line-cards. Continuous innovation in passive component function integration, miniaturization, and manufacturing automation, cutting edge WSS and amplification technology and comprehensive optical, mechanical, electrical and software design capabilities enable us to serve the needs of high-density, high-bandwidth, and flexible optical networks of telecom, datacom, hyperscale datacenter and supercomputing. In New Taipei, Taiwan, we serve global clients in telecom and datacom industries in providing innovative optical modules to support our customer’s next generation networks. We are looking for a "Senior Integration Testing Engineer" to join our team. This person will be responsible for design, developing and executing the test system for innovative fiber optical products, such as the optical frequency/time domain reflectometry, on the optical, electrical, and software functionality and performance, make sure the quality meets the standard of telecom and datacom industries. This person will work with multi-discipline teams, including sales and marketing, product line managers, electrical, mechanical, and optical R&D teams, and work with colleagues of different geographic sites. What You Will Do •Design, develop and deploy testing automation software solutions for advanced optical communication modules. •Writes drivers for optical testing and manufacturing equipment such as optical power meters, optical spectrum analyzers, motion controllers, etc. •Work with stakeholders on design of experiment (DOE), run product experiments, collect data and generate report with visualization tools. •Work closely with optical, electrical and firmware engineer on DFT/DFM throughout product development lifecycle •Work with product design team on design verification test plan, test platform development. •Work with NPI and manufacturing teams to support product calibration, manufacturing tests, process management and optimization. Who You Are (Basic Qualifications) •Bachelor’s or master’s degree in computer science/engineering, electrical engineering, or related technical field or discipline •5+ years in C/C++, C# development experience in PC based test software. •Experience with scripting languages such as Python, Ruby, etc. •Experience with data analytics tools and methodologies •Experience with product design verification procedure and platform development •Experience writing device drivers for test equipment in common communication protocols: RS232, USB, GPIB, Ethernet, etc. •Strong capability of problem identification and failure mode analysis, data modelling and processing. •Good skill in written and verbal communications, good team player to work with cross-discipline teams. What Will Put You Ahead •7 years in C/C++, C# development experience in PC based test software. 3 years in optical network industry. •Experience in testing software development in optical communications industry •Fluency in English

Molex possesses a rich heritage in the optical industry. We provide the highest performing and field-proven wavelength management solutions from components, modules to integrated line-cards. Continuous innovation in passive component function integration, miniaturization, and manufacturing automation, cutting edge WSS and amplification technology and comprehensive optical, mechanical, electrical and software design capabilities enable us to serve the needs of high-density, high-bandwidth, and flexible optical networks of telecom, datacom, hyperscale datacenter and supercomputing. In New Taipei, Taiwan, we serve global clients in telecom and datacom industries in providing innovative optical modules and subsystems to support our customer’s next generation networks. We are looking for an Analog Electrical Design Engineer. This person will be responsible for the designing, developing, testing, optimizing, and debugging analog circuits and systems with a focus on innovative optical networking devices and systems. You will be responsible for leading the electrical aspects of these products from concept to production, collaborating with other engineers, scientists, and customers, and ensuring the highest quality and performance of our products. What You Will Do •Design, develop, debug, optimize, and test analog circuits and systems, such as filters, ADC, DAC, PD, TIA, EDFA amplifier design, op-amp based amplifiers •Create and maintain test plans, technical documents, reports, and presentations, generate engineering changes, release designs for fabrication and assembly, evaluate vendors, analyze issues and determine root cause •Participate in design reviews and provide feedback on the design of analog circuits and systems •Work with other team members to optimize and finalize design for full production and to meet all specifications •Provide technical guidance to engineers and technicians. Provide technical support to customers and suppliers •Support process development and production teams •Perform and/or support design verification, reliability, and failure analysis to ensure that design meets all specifications and customer requirements •Perform other related duties as assigned by management Who You Are (Basic Qualifications) •Bachelors degree in Electrical Engineering, or related technical field or discipline •At least 5 years of experience in analog electrical circuit design and development •Solid fundamental knowledge and expertise in analog electrical circuit design and debug of various circuits •Experience using CAD tools, such as OrCAD, and familiarity with Allegro •Experience with DFMEA, PFMEA •Experience with design for manufacturing and yield •Demonstrated ability to analyze information and solve problems •Good verbal and written skills for exchange of information in a clear and concise manner •Demonstrated ability to work effectively within a team environment •Experience in leading projects, coordinating team members, ensuring on-time delivery and within budget •Experience in mentoring other engineers •Provided technical advice to management and other engineers •Ability to speak and communicate in English What will put you ahead •MS or PhD degree in Electrical Engineering, or related field related technical discipline •8+ years of electrical system design and process development of optical products •Experience with optical networking products and associated electrical circuits such as EDFA amplifiers, VOA, Photo Detectors, optical transceivers, etc. •Experience with simulation tools such as SPICE

Molex possesses a rich heritage in the optical industry. We provide the highest performing and field-proven wavelength management solutions from components, modules to integrated line-cards. Continuous innovation in passive component function integration, miniaturization, and manufacturing automation, cutting edge WSS and amplification technology and comprehensive optical, mechanical, electrical and software design capabilities enable us to serve the needs of high-density, high-bandwidth, and flexible optical networks of telecom, datacom, hyperscale datacenter and supercomputing. In New Taipei, Taiwan, we serve global clients in telecom and datacom industries in providing innovative optical modules and subsystems to support our customer’s next generation networks. We are looking for a Sr. FPGA Engineer. This person will be responsible for architecting, designing, developing, simulating, optimizing, testing, and debugging innovative FPGA solutions and code with a focus on optical networking products and embedded control. You will be responsible for leading FPGA logic, firmware, and software from concept to production, collaborating with other engineers, scientists, and customers, and ensuring the highest quality and performance of our products. What You Will Do • Architect, design, develop, simulate, synthesize, close timing, test, debug, and optimize FPGA logic firmware and software using Verilog and other tools • Implement various control and digital signal processing algorithms and systems on FPGA platforms • Optimize FPGA designs for performance, power, resource utilization, etc. • Troubleshoot and debug FPGA issues and provide technical support • Create and maintain test plans, technical documents, reports, and presentations, generate engineering changes, release designs, evaluate vendors, analyze issues and determine root cause • Participate in design reviews and provide feedback on the design of FPGA systems and implementations • Work with other team members to optimize and finalize design for full production and to meet all specifications • Research and evaluate new FPGA technologies, trends and vendors, select devices • Provide technical support to customers and suppliers • Perform other related duties as assigned by management • Mentor other team members Who You Are (Basic Qualifications) • Bachelor’s or Master’s degree in Electrical Engineering, or related technical field or discipline • At least 5 years of experience in FPGA design, debug, and development • Proficient in Verilog, SystemVerilog, or other HDL languages • Proficient with Xilinx, Altera, or other FPGA products and development environments • Experience with communication protocols, such as PCIe, I2C, SPI, SGMII, ethernet, other industry standard interfaces, digital signal processing, embedded systems, and control algorithms • Knowledge of FPGA design methodologies, best practices, and tools • Demonstrated ability to analyze information and solve problems • Ability to understand schematics and other PCBA board related items • Ability to speak and communicate in English What will put you ahead • MS or PhD degree in Electrical Engineering, or related field related technical discipline • 8+ years of FPGA system design and simulation • Experience developing with Xilinx SoC parts, such as Zync UltraScale+ and Zync 7000, and tools such as ISE, ModelSim, Vivado • Experience with scripting languages, such as Python or TCL

In New Taipei, Taiwan, we serve global clients in telecom and datacom industries in providing innovative optical modules and subsystems to support our customer’s next generation networks. We are looking for a Senior Mechanical Design Engineer. This person will be initially responsible for the design, development, and testing of mechanical fixtures and tooling used during the manufacturing and assembly process for optical networking devices and systems. The requirements are often more specialized due to the precision, tight tolerances, and sensitive components involved. You will be responsible for leading the mechanical aspects of these tools from concept to production, collaborating with other engineers, scientists, and customers, and ensuring the highest quality and performance of these devices. You will work with multi-discipline teams including: Product line managers, PCB designers, electrical, mechanical, software, and optical engineering teams. What You Will Do •Generate mechanical fixtures and tools, create test plans, technical documents, reports, and presentations, perform tolerance analysis, characterize devices, generate engineering changes, release drawings for fabrication, evaluate vendors, analyze issues and determine root cause, and manage project including schedule, budget, and resources •Work with team members to optimize and finalize design for full production and to meet all specifications •Present tooling concepts and design improvements to cross functional team members •Provide technical guidance to engineers and technicians •Support process development and production teams •Perform other related duties as assigned by management Who You Are (Basic Qualifications) •Bachelors degree in Mechanical Engineering, Physics, Applied Physics, Optics, or related technical field or discipline •At least 8 years of experience in tooling and fixture design, with specific experience in precision assembly environments • Experience working with optical devices, including lenses, sensors, fiber optics, or laser systems •Proven expertise in precision machining, assembly fixtures, and tooling for optical components or systems. Understanding optical alignment processes and the design of tooling/fixtures used to assist in optical component alignment with sub-micron precision •Familiarity with high-precision tolerance designs for components like mirrors, lenses, prisms, or other delicate optical elements •Experience in designing fixture that aid in active alignment processes and calibration of optical devices •Knowledge of adhesive bonding techniques, curing methods, and how they apply to optical devices •Solid fundamental knowledge and expertise in electro-mechanical designs and assemblies, such as telecommunications, data communications, consumer or industrial products, robotics, computers, embedded system, mobile phones, automotive, etc. •Solid experience using CAD tools, such as SolidWorks and AutoCAD for designing fixtures and tooling •Familiar with DFMEA, PFMEA, DOE, GD&T (Geometric Dimensioning and Tolerancing) •Familiar with design for manufacturing and yield •Demonstrated ability to analyze information and solve problems, especially for components with very tight tolerances and to identify fixture improvements that enhance production accuracy or throughput •Experience in leading projects, coordinating team members, ensuring on-time delivery and within budget •Experience in mentoring other engineers •Provided technical advice to management and other engineers •Ability to speak and communicate in English What will put you ahead •MS or PhD degree in Mechanical Engineering, Physics, Applied Physics, Optics, or related field related technical discipline •Experience with opto-electronic devices or components or modules, such as transceivers, EFDA amplifiers, lasers, etc. •Familiarity or ability to perform FEA simulation using Ansys Mechanical or other tools

This engineer will be responsible for designing and developing analog circuits of the liquid crystal on silicon (LCoS) backplanes. You will collaborate with the design team to define specifications, perform modeling and simulation, conduct transistor-level design, lead mask design to implement layout views, and test and verify the products. Key Responsibilities •Perform transistor-level design and modeling for various analog/mixed-signal circuit blocks. •Document schematic circuit design, simulation, and verification for design reviews. •Lead mask design to implement layout views and conduct post-layout analysis of circuits and systems. •Perform circuit simulations, analysis, and optimization to ensure robustness and reliability of the design. •Participate in production and bench-level test planning. •Conduct post-silicon tests to validate performance compliance with specifications. •Review yield and lab test results to drive bug fixes. Requirements •MS with 3+ years of IC design experience. •Deep understanding of analog mixed-signal design with experience in high-speed serial links. •Solid experience in designing analog mixed-signal circuit blocks, including biasing circuits, current sources, amplifiers, sample-holders, analog buffers, etc. •In-depth knowledge of analog mixed-signal concepts such as mismatch mitigation, linearity, stability, low-power, and low-noise techniques. •Experience in using various design tools and software such as SPICE, Spectre, Cadence, and MATLAB. •Familiarity with common high-speed SerDes protocols and Tx/Rx equalization circuits. •Design experience with high-speed digital circuits. •Excellent analytical, problem-solving, and debugging skills. •Good communication and teamwork skills, with the ability to work effectively in cross-functional teams. Preferred: •Knowledge of LCOS or LCD IC architecture, column driver, MIPI interface. •Good understanding mixed-signal design and EDA tool configuration/setup. •Knowledge of liquid crystal phase modulators.

This engineer will be responsible for designing and developing digital circuits of liquid crystal on silicon (LCoS) backplanes. You will encompass the entire digital design flow, including specification generation, architecture development, RTL description using System Verilog, verification via developed test benches, logic synthesis, executing place & route tools, and static timing analysis. Key Responsibilities •Lead the design of interfaces for liquid crystal phase modulator pixel arrays, such as column drivers, row drivers, and pixel bias drivers, as well as supporting clock and reset analog circuits. •Define specifications with the module architecture/system engineers. •Review, assess, provide feedback, and develop digital micro-architectures. •Generate RTL to comply with specifications, both manually and through automated generation. •Create a Cadence schematic database of digital blocks using Virtuoso. •Perform System Verilog verification simulations for the design by creating test benches at the block level. •Execute logic synthesis and generate the physical layout. •Create DFT hooks and generate test patterns. •Execute remaining back-end tools, including place & route, static timing analysis, and ATPG. Requirements •BS or MS with 2+ year experience. •Proficiency in System Verilog/Verilog language and simulation. •Proficiency in scripting languages such as Python, TCL, UNIX/LINUX shell, PERL, C/C++. •Experience with synthesis and static timing analysis. •Experience with place & route using Cadence Virtuoso, and verifying database vs schematics. •Knowledge of System Verilog assertions and functional coverage. •Experience with formal verification. •Familiarity with scan testing and participation in design reviews. •Excellent analytical, problem-solving, and debugging skills. •Good communication and teamwork skills, with the ability to work effectively in cross-functional teams. Preferred Qualifications •Knowledge of analog mixed-signal design. •Knowledge of SerDes circuits/IP. •Knowledge of LCOS or LCD IC architecture, column driver, MIPI interface. •Good understanding mixed-signal design and EDA tool configuration/setup. •Knowledge of liquid crystal phase modulators.

PRIMARY PURPOSE: We are seeking individuals who are proactive, humble, unafraid of learning new things, and have the potential for growth. The R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. You are responsible for designing and optimizing a product or create valuable or quality of product that will scale with Molex continued growth. As a Product Design Engineer, you will design and evaluate product, identify product requirements and contribute to research and project planning. DUTIES AND RESPONSIBILITIES: 1. Apply design, engineering, and technical expertise to influence cross-functionally and deliver reliable mass production components and solve time-sensitive problems. 2. Make significant contributions to design, development, and validation of different solutions (Specifically focused on the cooling solution for the cage and the design of the connectors.) 3. Manage the product design, provide guidance to team members, and communicate progress, and request feedback to prevent/remove roadblocks. 4. Anticipate and address product design issues or risks, analyze data, and validate product design to suggest or implement design improvements. 5. Conducts feasibility studies for new projects leveraging existing designs while also generating new designs and IP, drives consistency and thoroughness across portfolio. EDUCATION Required: Bachelor’s degree in mechanical engineering, Process Engineering, Manufacturing Engineering or equivalent practical experience. Required Experience and Skills:  8~10+ of work experience as a hands-on engineer.  Possesses thorough understanding of the product development process (Design Concept, EVT, DVT, PVT).  Demonstrated experience working with cross functional teams in English.  Engineering Design Software: NX (preferred), Creo, Pro/E, etc.  Knowledge in molding of different kind of materials, stamping, assembly process, product development process.  Ability to independently complete design and manage projects.  Understand thermal and mechanical of liquid cooling system.  Good problem-solving skill and able to deeply analyze testing failure mode.  Tolerance stack-up Analysis, review thermal, and reliability testing report. Desirable Requirements:  Experience in server or switch liquid cooling systems.  Experience in the high-speed connector industry.  Relevant knowledge of seal product design.  Experience with simulation or performance analysis of liquid cooling thermal solutions, precision machining, brazing (furnace, vacuum), molding (plastic & metal), soldering, stamping/assy, welding or sintering processes.  Passionate about design work and innovation, creating new products to address gaps in the industry.

PRIMARY PURPOSE: To develop Si-Photonic high speed devices, aligned with corporate’s roadmap and vision. What You Will Do 1. Study/explore new technologies and develop advanced device to align with corporate’s product vision or roadmap 2. For each advanced device, develop simulation model by operate (not limited) commercial tools, like HFSS, FIMMWAVE/FIMMPROP, Lumerical, SILVAGO….. 3. Lead design review to settle design parameters and plan DOE for design optimization 4. Manage specific steps in executing engineering prototypes or functional samples. 5. Validate and document design details, principles and correlates with simulation models. SCOPE: Take responsibility to manage optoelectronic devices development, followed by corporate’s roadmap and vision for long term value creation. DUCATION: REQUIRED: Master or Ph.D. degree, major optoelectronic related fields WORK EXPERIENCE: REQUIRED: Research topic related to Si-Photonic device in optical fiber communication PREFERRED: 1. Have designed and characterized Si-PIC high speed component 2. Have work experience (or cowork) in Si-fab wafer process. SKILLS & ABILITIES: REQUIRED: 1. Optical waveguide simulation using commercial tool like Photo Design, Rsoft or Lumerical 2. Wafer layout capability using commercial tool like Cadence, Silvaco 3. Good interpersonal skills and leadership for knowledge sharing 4. Good team working and communication skills 5. Good in reading & writing, and presenting skills in English 6. Good problem solving skills match with MBM guiding principle PREFERRED: 1. Have knowledge on quality management. 2. Have knowledge on data statistics and analysis

Molex possesses a rich heritage in the optical industry. We provide the highest performing and field-proven wavelength management solutions from components, modules to integrated line-cards. Continuous innovation in passive component function integration, miniaturization, and manufacturing automation, cutting edge WSS and amplification technology and comprehensive optical, mechanical, electrical and software design capabilities enable us to serve the needs of high-density, high-bandwidth, and flexible optical networks of telecom, datacom, hyperscale datacenter, artificial intelligence, and supercomputing. In New Taipei, Taiwan, we serve global clients in telecom and datacom industries in providing next generation optical modules to support 5G Networks. We are looking for a Senior Electrical Design Engineer. We are building a new capability to accelerate our leading edge optical networking capabilities. We are looking for a Senior Engineer that will design, review, and improve a variety of optical equipment, including OTDR, OCM, OSC and other electronic products for 5G and other advanced optical networking systems and data communications networks. Responsibilities: • Develop, review, release, and support advanced optical modules and sub-systems such as OTDR, OSC, OCM, etc. • Work with product marketing and engineering team consisting of optical, hardware, mechanical, software, and process engineers to enable high performance, cost effective, and robust products, and repeatable and efficient manufacturing • Ensure successful transition from architecture to new product introduction and to volume production • Drive and recommend innovative solutions to ensure product meets customer performance, cost, schedule, and other requirements • Select components, generate schematic design, create PCB layout instructions, and closely work with FPGA, software, mechanical, thermal, optical, process and other teams to optimize the design • Perform circuit simulation for high speed signals using HFSS, ADS, or similar • Complete board bring-up, debug and validate performance of electronic systems; conduct experiments to characterize components and subsystems • Generate documentation of the design and results of the experiments and testing • Help develop DVT, manufacturing, assembly, diagnostic, test, qualification plans and other documents. Provide technical guidance to resolve manufacturing issues • Resolve customer technical issues. Work with FAE, QA, and other technical-support teams • Work with global teams for new product designs • Perform other duties as assigned by management Requirements: • Bachelors degree in Electrical Engineering • At least 8 years electrical engineering experience in Telecom, Datacom industry or related fields • Proficient in designing high speed boards • High speed digital transmission and signal integrity knowledge • Proficient with electronic design and simulation tools, such as OrCAD with CIS, Allegro, HFSS What will put you ahead • Masters of Electrical Engineering • Experience EDFA and Raman optical amplifiers • Experience in designing and resolving ESD, EMI, Immunity and other compliance and safety related items • Proficient in analog electronics: TIA, PD, filters, ADC, DAC, analog PLLs, etc.

產線相關職務分配以適才適用為原則，大致工作內容如下: 1.跳線及光纖連接器組裝、測試、包裝、標籤、放大鏡檢查 (屬低風險職務) . 2.需穿著全套寬鬆工作服及防靜電配備 (例如:防靜電手環、防靜電拖鞋帽子…等，不影響活動且透氣舒適)，作業程序可坐可站，無固定姿勢要求。 3.隨時反應組裝生產或品質問題，預防或降低不良品發生. 4.維護檢測工具與工作站整潔安全. 5.依職務使用產線電腦程式. 6. 其他主管交辦事項. 7. 目前只有日班，加班視客戶訂單要求，可能集中在下半年，並於平日周一~周五加班2~3小時。可同時兼任家庭與工作平衡。 本公司以美商方式管理，著重員工個人表現予以調薪。 公司環境整潔明亮，且不時辦理員工活動與聚餐，增加員工凝聚力。歡迎加入!

Your Job Molex is seeking an Account Manager with Datacom/Hyperscale industry experience to service our Taiwan-based ODM customer. Here at Molex we are leading the industry, with our advanced Datacom/Hyperscale solutions to solve our customers toughest challenges. In this highly visible sales position, you will join a team of professionals who are passionate to deliver the best products in the world to the market. What You Will Do • Major responsibility is to design in Molex products and solutions within the customer end products (servers and network switches). This position needs to develop and maintain close relationships within the customer, to propose Molex solutions and ensure sure we win the design/business. • Customer relationship management: Develop, grow, and maintain strong relationships within the customer’s engineering, procurement, sales, quality, and manufacturing teams. A deep and thorough understanding of the customer is critical in this role. • Collaborate and proactively communicate with global sales team and business units to ensure program alignment and business award closure. • Gather internal consensus from the necessary stakeholders to professionally respond to customer requests, RFQ’s and price negotiations. • Understand the competitive landscape; gather business intelligence and report findings. • Provide and maintain reliable forecasts to support operational success. • Be the one point of contact for the customer to resolve to completion their requests or issues directly, or indirectly through the coordination with internal teams, to improve the overall customer experience. • Develop and maintain a customer account plan that aligns with customer and internal goals taking into considering the competitive landscape. Who You Are EDUCATION: •Bachelor’s degree in engineering (electrical or mechanical preferred); or non-EE degree but with 5+ years Datacom industry connector and cable design-in experience. •At Molex, our daily communication is English based, fluency in English (written and spoken) is preferred. What Will Put You Ahead •Design-in experience for Datacom/Hyperscale (Server/network switch) customers. •Knowledge of Datacom/Hyperscale business within US/EU based OEM and Tier-1. •Proven track record of design wins with customers. At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Who We Are At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Your Job Molex is currently seeking a talented Applications Engineer to join our team. In this role you will play a critical role in providing technical support and expertise as well as influencing our AEC products in the fastest growing market segment for datacenter networking and AI applications. Your primary responsibility will be to ensure the successful integration and utilization of products and solutions within the customer's environment. You will serve as the bridge between technical teams and customers, helping to troubleshoot issues, offer solutions, and build strong customer relationships. This is an exciting opportunity to join a young team on the ground floor and can open a path to additional leadership roles within Molex. Our Team Molex is looking for a Lead Application Engineer to support and develop Active cable designs for Hyperscalers. Our business is witnessing tremendous growth owing to the increasing need for cloud services and higher data transfer rates. You will be working under leadership that has been setting and driving industry standards in data centers for more than 30 years. **This role is eligible for remote work for the right candidate and will require domestic travel to customer sites** What You Will Do •Work directly with customers and Molex product development teams from product conception to successful customer qualification. Manage communication channel for design-in activity in concert with internal teams. •Provide technical support of strategic accounts and drive critical customer issues to resolution with a focus on defining customer requirements (evaluation, validation and final qualification). •Work with engineering team to define product test requirements based on the customer's application across the fleet of switch and NIC card combinations. •Interpret industry standards, customer requirements, and competitive intelligence to provide guidance into product features and performance requirements to meet customer module/AEC qualification. •Maintain expert level of product knowledge and application for transceiver bit rates of 400G and beyond (QSFP, QSFP-DD, OSFP). •Mentor application & development engineers on technical challenges in networking module systems. •Generate marketing collateral such as data sheets, application notes and EEPROM and firmware documents. Who You Are (Basic Qualifications) •Degree in Electrical Engineering, Computer Science, Physics, or related field. •5+ years of experience as design/system/applications engineer with a minimum of 2 years of direct customer facing experience is highly desired. •Experienced in system failure analysis and de-bugging. •Strong knowledge of hardware (electrical, optical, mechanical) and embedded software/firmware. •Knowledge of networking PHY layer architecture (Ethernet). •Knowledge of transceiver technology and architecture. •Hands-on lab experience. •Demonstrated ability to dynamically prioritize assignments and work independently. What Will Put You Ahead •Master's or PhD in Electrical Engineering, Computer Science or Physics. •Direct experience in optical or electrical transceivers, AOC or AEC cable assemblies. •Familiarity with high-speed PCB layout, signal integrity, assembly, and manufacturing. •Good knowledge in programming languages like C and Python. •Ability to write scripts for automation. At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.

Molex is seeking a Program Manager to join our Optical Systems Business Unit (OSBU). In this role the successful candidate will be part of a world-class engineering team, responsible for managing and sustaining our portfolio of optical transceivers. The successful candidate will have specific responsibilities including maintaining product performance, driving cost optimization, supporting customer requirements, and ensuring ongoing reliability and quality in the field. The Program Manager will lead cross-functional efforts across global teams to address product updates, lifecycle management, and issue resolutions. This is a key leadership role in ensuring the long-term success and competitiveness of our products. Some travel is expected in this role. Key Responsibilities - Develop and maintain detailed program plans capturing resource requirements, schedules, budgets, product cost targets, manufacturing support strategies, risk mitigation plans, and other key sustaining activities. - Drive the execution of the program according to the approved plan. - Ensure compliance to OSBU’s product development process. - Tracking and reporting of key program metrics. - Providing program updates to executive management and customers. Minimum Requirements •Bachelor's degree & above •At least 6 years’ experience in program management •Experience in optical transceiver, consumer electronics or medical device industries •Demonstrable record of successfully running complex development programs •Adept at leading through influence, strong negotiation skills and an ability to form collaborative working relationships •Strong planning ability, particularly when presented with ambiguity •Knowledge of product life cycle management, business processes, and tools for project planning •Proficient in both oral and written English What Will Put You Ahead - Master’s or Ph.D. degree - PMP or equivalent project management certification - More than 10 years’ experience in optical transceiver industry Who We Are At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Technical Project Manager (Taiwan Design Center) Are you looking to make a connection to your career? Come to Molex where we create connections for life. We use innovation, engineering excellence, commitment to quality and reliability, and superior customer experience to improve communication, elevate experiences, and engage and inspire people everywhere. Molex’s Copper Solutions Business Unit (CSBU) is a global team that works together to deliver exceptional products to worldwide telecommunication and data center customers. CSBU is one of the most highly technically advanced business units within Molex. Our engineering teams are designing cutting edge solutions for high-speed, high-density products that maximize speed, signal integrity and efficiency. Technical Project Manager (TPM) will be leading a highly motivated, world-wide, cross functional team through the New Product Development Process from project initiation approval through production. This person will lead projects with global cross functional teams, working directly with customers, mentoring team members, solving problems, and making/being accountable for project-level decisions. You have strong project management experience in “technical” business environments. The Project Manager will thrive on moving the needle to achieve business objectives that will take Molex and our customers to the next level. What You Will Do In Your Role •Partner to Product Manager: Ensure Molex key technology projects seamlessly support our customer’s finished good project deliverables through close collaboration and effective communication with our customer. •Project Team Leader: Simultaneously lead multiple New Product Development projects for customer specific and general market projects. •Develop internal & external facing Project Charters that clearly articulate project strategy, scope, financials, and schedule. •Own Project Reporting communication to both Management and Customers. •Perform the Project Management function: Manage Project Change Control and Decision Documentation. •Lead Project Plan development, management, and closure (transfer to production owner). •Own and develop Macro Project Schedules and understand and hold accountable Functional Team Members supporting Micro Schedules. •Lead and mentor team members in project management principles, PDP processes, risk management, issue resolution, decision making, etc. •Proactively identify, document, and execute risk reduction activities to minimize Project Risks associated with Cost, Quality, and/or Timing that could negatively affect Project Plan achievement. •Work with Suppliers: Ensure that they meet Molex’s expectation for timing, cost and quality in support of the Project Plan The Experience You Will Bring •Bachelor’s degree in engineering, finance, business, supply management or related field •Experience leading projects with Product Development •At least 4 years of Project Management experience •Experience with customer facing roles or external executive facing experience •Experience leading multi-national teams •Experience in matrix environment •Willingness to travel domestically and internationally up to 15% of time •Ability to work mornings and evenings to accommodate global meetings •Ability to obtain PMP certification within 1 year (company paid) Qualities and Behaviors: •Natural leader with sense of ownership and accountability •Strong presentation and communication skills •Self-driven with ability to thrive in a remote working environment •Contribution Minded •Can-Do Attitude •Natural Leader with sense of ownership and accountability •Organizational, interpersonal, & decision-making skills What Will Put You Ahead •PMP Certified •Master of Business Administration (MBA) •Bi-Lingual in English, Mandarin or Chinese •SAP Experience

Your Job Molex is seeking an experienced Sr. Process Engineer to Responsible for evaluating and configuring manufacturing processes, operation procedures, workflows, and collect information to reduce cost, enhance yield rate and improve sustainability and develop best practices within the production process.. What You Will Do •Cross-functional cooperation and coordination with design engineering teams, manufacturing teams, quality teams and supply chain resources. •Responsible for NPI transferring process, especially in participating in the “Design for Manufacturing” process by working with the manufacturing and design teams to make sure the products conform manufacturing standards. •Monitor production data and yield status to detect manufacturing related issues, and then responsible in analyzing and identifying root cause on production process failure and work with teams to clarify and resolve them. •Create and manage process documentation and operating instructions. •Execute outsourcing component evaluation, acceptance and qualification test plans. •Able to support / set production process in North Vietnam. Who You Are EDUCATION: •Bachelor’s degree above in a technical field (IE, EE, ME, Materials Science, etc.) •Good communication skills within different teams and work effectively taken with team members. •Good ability to Listen/Speak/Read/Write skills in English communication. What Will Put You Ahead •5+ years in manufacturing engineering, process engineering, industrial engineering and verification perform working experiences. •Good ability to Analytical, problem-solving and critical-thinking skills. •Process control experience for fiber optical products is preferred. •Have experience to use relevant drawing software such as Solid work, NX, or CAD for production fixture design is preferred. •Capable for Solidwork or AutoCAD tools

生產線日班作業人員(日班工作時間 07:30-16:30) 1. DES蝕刻定期設備清潔保養 2. DES蝕刻機台操作, 首件自主件作業 3. 藥水性工作站點 4. 有製造業經驗, 孰悉產線生態

1. Job Description: a. Design and develop accurate (um level) optical module. b. Optical design (ZEMAX) and tolerance analysis. c. New technology/ component study. d. Support on production issues, business travel to USA and China is needed. 2. REQUIREMENT: a. >3 yrs working experience in optical industry. b. Familiar with ZEMAX software and tolerance analysis c. Hands on ability with accurate optical alignment experience. d. Cowork experience with Mechanical and production team. e. English communication ability and Mandarin communication ability. 3. PREFERRED: a. Laser experience: laser beam modeling experience, POP experience. b. Accurate laser adjustment on optical table experience. c. Optical communication related product experience. 4. NOTE: Training opportunity in USA 上班地點(二擇一): •新竹: 新竹科學園區工業東四路26號 •新店: 新北市新店區寶橋路235巷8號

Molex possesses a rich heritage in the optical industry. We provide the highest performing and field-proven wavelength management solutions from components, modules to integrated line-cards. Continuous innovation in passive component function integration, miniaturization, and manufacturing automation, cutting edge WSS and amplification technology and comprehensive optical, mechanical, electrical and software design capabilities enable us to serve the needs of high-density, high-bandwidth, and flexible optical networks of telecom, datacom, hyperscale datacenter and supercomputing. In New Taipei, Taiwan, we serve global clients in telecom and datacom industries in providing innovative optical modules to support our customer’s next generation networks. We are looking for an Optical Design Engineer to join our team. This person will be responsible for optical system design and analysis of innovative fiber optical products, such as the optical frequency/Time domain reflectometry, optical performance monitor, weak optical coherent signal detection solutions that are used in telecom and datacom. This person will work with multi-discipline teams, including sales and marketing, product line managers, electrical, mechanical, and optical R&D teams, and work with colleagues of different geographic sites. What You Will Do • Design new fiber optical products and manage product extensions, especially participate in the optical system design and analysis of the electro-optical modules and systems such as the OFDR, OTDR, and OPM, etc. • Work with chief/principal optical engineer to design new products, build optical models and performance error and tolerance analysis. • Provide technical guidance to process engineers and technicians. Provide technical support to customers and suppliers. • Provide technical support on processes development. • Performs design verification activities to ensure that optical design meets the specifications of the customers and standard organizations. • Release drawings of optical components and sub-assemblies. • Understand, support, and contribute to current Molex Total Quality Management (TQM), Six Sigma, International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures. Who You Are (Basic Qualifications) • Bacheller’s degree in physics, applied physics, optics and optical engineering, electrical engineering with optical orientations. • 6 plus years free space and/or micro-optics system design & development experience. • Solid fundamental knowledge and expertise in free space and/or micro-optics optical system design, optical engineering, photonic simulation, or relevant fields. • Fluent in Zemax, CODE-V, Matlab or other simulation tools to build models of optical products. • Proficient in optical system error & tolerance analysis • Demonstrated ability to analyse information and solve problems. • Good verbal and written skills for exchange of information in a clear and concise manner in English and Mandarin. • Demonstrated ability to work effectively within a team environment. What Will Put You Ahead • Master’s or Ph.D. degree • The experience of design and process development experience in fiber optical products. • Familiar with design for manufacturing and manufacturing processes. • Familiar with the characteristics and use of various optical adhesives, glasses, ceramics, and metallic materials. • Familiar with the opto-mechanical design concepts and principles.

假日班(週休星期二&星期三) 日班工作時間 (07:30-16:30) ; 夜班工作時間(19:30-04:30) 1. 雷射或裁剪區域作業。 2. 配合公司加班等各項政策。 3. 能接受工作需求的多站別技能訓練