「製程工程師」的相似工作
台灣光罩股份有限公司共500筆
10/17
索爾思光電股份有限公司光電產業
* 負責高速模塊的產品良率監控
* 不良品的失效分析與改善對策成效追蹤CIP
* 制訂標準化流程SOP、PN及資料庫建立
* 新產品製程開發評估, 新產品試作與轉量產(NPI)
* 測試程式驗證、生產流程建立
* 生產效率提升
* 產品改制作業、Waive作業
* SPC, FMEA, GR&R
10/14
同欣電子工業股份有限公司被動電子元件製造業
1. To improve device yield &CIP in order to meet customer request and customer service.
2. Identify and solve process and device problems.
3. Support for customer visit and audit.
10/14
漢磊科技股份有限公司半導體製造業
1. 半導體製程維護、異常處理與改善及新製程開發。
2. 產品良率提昇、製造流程簡化及產品失敗分析。
3. 建立、改善製程條件，並監控製程結果。
4. 評估、引進、驗收新製程、技術設備及材料。
5. 執行部門計畫及規劃執行更新部門內相關製程文件。
10/11
瑞儀光電股份有限公司光電產業
1. 實驗室設備儀器規劃
2. 製程優化與異常分析
3. 協助專案進行，解決專案執行中所產生的光學相關問題，並釐清原因
4. 跨部門團隊合作、溝通協調、語文能力
10/15
力成科技股份有限公司半導體製造業
執行晶圓級封裝AOI製程專案開發、製程整合、良率改善及缺陷分析
詳細職責如下：
1. Maintaining process flow and recipes on MES, and tools and recipes on RMS.
2. Handling abnormal cases on MES and conducting daily yield analysis.
3. Supporting New Product Introduction (NPI) and Design of Experiments (DOE), and preparing summary reports.
4. Developing and implementing process improvements to enhance yield and productivity.
5. Conducting root cause analysis for defects and collaborating with cross-functional teams to resolve process-related issues.
此職務需日夜輪班 (做二休二，約每三個月日夜輪調一次)
日班上班時間：07:20~19:30 (中間休息2小時10分，實際工時10小時)
夜班上班時間：19:20~07:30 (中間休息2小時10分，實際工時10小時)
* 熟悉半導體晶圓級製程或具備跨部門溝通經驗尤佳。
＊實際薪資依學歷、科系、相關工作經驗、專業證照、特殊專長與語言能力綜合核敘。
＊資深人員薪資另議。
10/17
穩懋半導體股份有限公司半導體製造業
【本職缺僅接受穩懋官方網站投遞】請至穩懋官方網站投遞個人履歷表，此職缺履歷登錄網址: https://www.winfoundry.com/WinTalentPool/JobRequirement/Edit/1062
1.蝕刻製程生產線技術支援
2.製程改善/新製程開發
3.處理製程問題改善
4.改善方案提升良率
5.電性參數分析及測試
6.生產線值班，須配合on call
10/02
環球晶圓股份有限公司中德分公司半導體製造業
1. Maintain production line smoothly.
2. Troubleshooting in time: Failure analysis & action.
3. Experiment design for Capability improvement.
4. Yield improvement.
5. SPC rule setting & review.
6. Throughput(OEE) de-bottleneck.
7. Cost reduction.
8. New process evaluation.
9. Cross site benchmark.
10. Cross function co-work.
11. Document editing.
10/14
揚明光學股份有限公司_YoungOptics Inc.光學器材製造業
1.負責產品問題分析及良率達到目標
2.產品製程規劃及改善,並提升生產效率以降低工時
3.設計生產治工具及設備的改善優化
4.物料Second source的評估及導入
5.客戶回饋的問題處理及改善
10/15
力成科技股份有限公司半導體製造業
1. 先進封裝製程(MEOL/BEOL)優化、產品良率提升及異常產品分析
2. 新產品製程開發及實驗計畫進行
＊具備Flip Chip Bond/Die Bond/CoWoS/ HBM/ CIS經驗者佳
＊實際薪資依學歷、科系、相關工作經驗、專業證照、特殊專長與語言能力綜合核敘。
＊資深人員薪資另議。
10/14
The Installation Engineer job is high profile and exciting opportunity for adventurous souls! Works under minimal direction from Management. Completes documented procedures and exercises judgment within defined procedures. Recommends changes to existing process and procedures. Primary responsibility is to strive for predictable Cycle Times and Warranty Starts for new tools installed and upgraded at our customer sites. Includes activities associated with setup, alignment, calibration, troubleshooting, diagnosing, and repairing of highly sophisticated capital equipment. Represents the company to the customer and assumes accountability for customer satisfaction with all installation/upgrade-associated activities. Assures operational quality of system equipment. Works directly with KLA regions and customers to verify new tool performance and transfer tool responsibility. Seeks warranty sign-off on newly installed tools
Roles and Responsibilities
• Installation of new tools in the field. Follows all procedures and provides a consistent result within specified cycle times. Achieves a predictable warranty start.
• Evaluates, analyzes, diagnoses and fixes technical equipment problems related to installation. Can repair issues using standard procedures or innovate to resolve system problems which can have multiple causes.
• Solving problems and repairs of sophisticated system level problems are based on Installation Engineer's technical knowledge and training. Installation Engineers seek help from Staff Engineers and Management when problems occur that may exceed knowledge, education and training.
• Prepares field service reports and daily passdown on Installation progress and non-conformances. Contributes to post-activity Quality Feedback Report
• Hold pre-installation meetings with the customer to scope customer unique requirements then create plans of action to measure and satisfy the unique needs. Execute plans of action and validate deliverables with the customer.
• Meet with customer to facilitate warranty signoff after the activity is complete.
• Acquires all vital international travel documents and manages their personal lives to be ready for domestic and occasional international travel.
• Handles personal finances to prevent disruption to scheduled activities - even when traveling for extended periods.
• Travels domestically and internationally by commercial transportation to customer sites.
• Assists other engineers as necessary. Provides mentorship and technical assistance at customer sites. Can develop basic POAs. Provides phone and on-site support for junior engineers
*Note: Only applications with *English resume* will be considered.
*Please also apply through KLA Career page: https://careers.kla.com/
10/14
漢磊科技股份有限公司半導體製造業
1. 半導體製程維護、異常處理與改善及新製程開發。
2. 產品良率提昇、製造流程簡化及產品失敗分析。
3. 建立、改善製程條件，並監控製程結果。
4. 評估、引進、驗收新製程、技術設備及材料。
5. 執行部門計畫及規劃執行更新部門內相關製程文件。
10/14
財團法人國家實驗研究院政府／民意機關
1. 光學鄰近效應修正（Optical Proximity Correction, OPC）以及電子鄰近效應修正(Electron Proximity Effect Correction) 模型建立。
2. Layout 自動化系統建立。
3. 其他主管交辦事項。
10/17
光環科技股份有限公司光電產業
1. 生產設備的參數調整與維護
2. 操作流程 SOP 撰寫
3. 線上人員的教育訓練
4. 生產異常狀況的排除
5. 製程開發或優化及改善
6. SPC的監控與管理
7. 主管交辦事項
10/15
力成科技股份有限公司半導體製造業
1.覆晶製程改善與異常處理
2.協助新產品、新製程導入
3.製程專案推動及管理
4.成本降低專案規劃與執行
5.客戶溝通與簡報
* 具備覆晶相關製程(FC-Bonding、Underfill、Molding)經驗者尤佳
* 此職務歡迎理工相關科系新鮮人應徵挑戰。
＊實際薪資依學歷、科系、相關工作經驗、專業證照、特殊專長與語言能力綜合核敘。
＊資深人員薪資另議。
10/14
元太科技工業股份有限公司光電產業
I. Ink process optimization and mass production monitoring :
1. Material synthesis process
2. Particle dispersion process
3. Compounding process
4. Search and summarize relevant papers and optimize proposals
II. Optical data tracking of finished materials :
1. Adjust material QC item based on optical data
2. Find new / key QC indicators
10/14
同欣電子工業股份有限公司被動電子元件製造業
1. 工程實驗，負責製程參數實驗、制訂與修訂。
2. 掌控產品良率及精度。
3. 監控產品規格。
4. 規劃產品製造流程並提出改善的方案。
*工作待遇/職稱：將依學經歷及專長等條件進行敘薪。
10/15
台灣三菱化學股份有限公司化學原料製造業
1.參與半導體製造前段製程中蝕刻液（Etchant）的開發與優化。
2.改良並調整蝕刻液的化學組成。
3.計畫並執行實驗，收集與分析實驗數據以進行組成配方的優化調整。
4.與台灣與日本的研發團隊討論實驗結果與改良方向。
-------------------------------------------------------------------
1.半導体製造プロセス前工程のエッチャント開発業務。
2.エッチャント組成の改善、チューニング。
3.実験を計画して実行し、取得したデータをまとめ、組成改善のチューニングを行う。
4.実験結果や改良方針について、台湾/日本のRDチームと議論を行う。
10/13
10/13
10/17
索爾思光電股份有限公司光電產業
* 負責高速產品及光通訊相關產品的封裝or測試製程
* 制定封裝設備製程參數, SOP
* 新產品製程開發評估, 新產品試作與轉量產(NPI)
* 量產良率及生產效率提升
* 異常處理與失效品分析
* 協助工程樣品製作與工程/設計變更評估
* SPC, FMEA, GR&R