「Server/Notebook Hardware Application Engineer - Taipei」的相似工作

The successful candidate will be a self-starter who likes to take responsibility and works best with little supervision. Likes to perform a variety of tasks and have the ability to handle multiple priorities and has previously performed in a similar position. This is a 'hands-on' role requiring a strong technical background and product development experience. Duties: • Identify technical issues, troubleshoot and resolve them by coordinating with R&D, Manufacturing and Field teams. • Participate in customer technical meetings and prepare training programs for internal subordinates. • Hardware validation of Networking, Storage, Server products against customer's infield issues, requirements and Mfg. issues during NPI or RMA. • System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval. • Qualify alternative components for compatibility, cost effectiveness and benchmarking. • Support Manufacturing Engineering and Test Engineers on trouble shooting and resolving technical issues and root cause analysis. • Work with software teams to identify root cause of system failure. • Ability to install software such as Linux based Operating Systems, ONIE, BIOS, BMC, SES. • Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum. Background: Candidates should have 8+ years' experience in either Network, Storage or Server products. Candidates should have the following essential qualifications and experience: • At least BEng. (Hons.) in Electronics or similar. • Strong electrical design and debug skills required. • Familiar with PCIe, NVMe, SAS, SATA, I2C, SPI, DDR buses. • SDRAM timing and integrity analysis for clocks, strobes, S&H, Power bounce, temp stability. • Hands-on design knowledge of latest peripheral chipsets for Gigabit Ethernet, SCSI, SATA, SAS, USB, Ethernet, & PCI cards etc. • High performance RISC / X86 CPUs and architecture including Intel, AMD, MRVL. • Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum analyzer. • Qualify alternative components for compatibility, cost effectiveness and benchmarking. • System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval. • Work with software teams to identify root cause of system failure. • Working knowledge of windows & Linux configuration, installation procedure, network configuration, driver configuration etc. • Working knowledge of Diag, ONIE, BIOS, BMC, Linux and Windows operating systems • Knowledge of the following would be desirable: - Experience of working in medium sized multidisciplinary development teams - Ethernet Switches, Server, Storage products - Orcad Schematics & Allegro PCB layout tools Personal Attributes: The successful candidate will be a self-motivated individual capable of working with a minimum level of supervision in a dynamic team environment. Good interpersonal skills. Be able to communicate effectively (both verbal and written) with members of other teams, departments and clients; a high degree of liaison is needed.

負責x86 系統主機板的硬體研發設計與驗證，確保產品符合性能和可靠性，協助解決設計與生產中遇到的問題。 主要負責x86系統主機板的 1‧線路設計 2.layout review 3. HW issue debug 4. 主機板 BOM

歡迎2026年畢業並正在找尋研發替代役的同學申請! Direction 1: System Design Power Validation Engineer Direction 2: PCB Layout Engineer Direction 3: System Application Engineer What you'll be doing: • Collaborate with system design, hardware, and power engineering teams to participate in end-to-end design, validation, and optimization of hardware products (such as GPUs, AI accelerators, server platforms, etc.) • Responsible for circuit schematic design and PCB layout using EDA tools (such as Altium, Cadence, Mentor Graphics) for multilayer high-speed board design and optimization • Perform PCB design reviews, assist in resolving signal integrity, power integrity, EMI/EMC issues to improve design quality and manufacturability • Participate in board bring-up, debugging, power testing, and performance validation of hardware prototypes, helping to ensure optimal power efficiency under varying operating conditions • Write and maintain design, validation, and test documentation, including but not limited to design specifications, validation reports, and test plans • Work closely with cross-functional teams to continuously improve design processes and enhance product innovation and competitiveness What we need to see: • Hold a Master of Science/Ph.D in Electrical Engineering or related field • Familiar with circuit schematic design and PCB layout processes, and basic proficiency with EDA tools (such as Altium, Cadence Allegro/OrCAD, Mentor PADS, etc.) • Strong interest in power management, DC-DC converters, signal integrity, and high-speed digital design is a plus • Good debugging, analysis, and problem-solving skills; able to work independently or within a team to resolve design and validation challenges • Good command of English for reading technical documentation and communication • Proactive, eager to learn, and passionate about the latest electronics and AI hardware technologies 應徵方式: 請提供以下資料： • 英文個人履歷 • 學士+碩士成績單 (中英文皆可) 提交申請: 請將上述資料投遞至104，符合資格者將會收到進一步的聯繫通知。

Has lead experience for X86 or GPU system. 1. 獨立(或領導一個團隊)負責伺服器(Server)產品之電子電路設計與開發 2. 能進行新技術/概念/晶片世代的研究並透過新案子實踐並提供符合(或超越)市場需要之產品設計 3. 審查設計及驗證之相關文件(Schematic/Layout/Validation Repot/Issue-analysis Report/Product specification…etc.) 4. 產品除錯及問題排除 5. 在不影響產品品質的前提下, 有效率執行設計研發流程; 並將價格(cost)和品質(quality)兩者都放進設計考慮中. 6. 能同時執行多個專案目標並成功完成 7. 能推動跨組織討論,有效率解決技術問題,並主持與客人之技術討論 8. 協助引領團隊並協助其他成員解決問題

Synology's portfolio of NAS, IPSAN, networking, and surveillance solutions are depended upon by millions of customers around the world. All of that starts from having a solid foundation to build upon, the hardware itself. The Hardware Division is responsible throughout the entire product development cycle, starting from the initial design, mass production, and then obtaining market feedback. Through every step, we aim for quality and most importantly, reliability. A building is only as strong as its foundation. The same can be said for the hardware powering our solutions. You'll be working with software, firmware, and other hardware engineers to implement and design hardware platforms for maximum reliability. You will: - Create specifications and product design documentation - Schematic capture and PCB layout design - Perform design validation - Verify and optimize for volume manufacturing

✅About the job As a Senior System Hardware Design Engineer, you will drive system hardware design focusing on high-speed interfaces such as PCIe, USB, Thunderbolt, and MIPI, and manage the entire product development cycle. You will collaborate closely with CM/JDM/ODM partners to solve DFM/DFT issues, optimize designs for manufacturability and yield, and ensure high-quality production. You will also be a key contributor in ASIC/SoC validation and system bring-up. ✅Responsibilities: #System Hardware Design & Architecture: • Architect and design hardware platforms with high-speed I/Os (PCIe, USB, Thunderbolt, MIPI). • Lead schematic design, component selection, and architecture definition. • Co-work and support the entire hardware development process with SI companies. #Signal/Power Integrity (SI/PI) & PCB Design: • Perform SI/PI analysis for high-speed signals and power domains to ensure robust performance. • Define PCB stack-up, high-speed routing rules, and work closely with layout engineers. • Review and guide PCB layout and layer stacking for optimal signal/power integrity and EMI/EMC considerations. #ASIC/SoC Validation & System Bring-Up: • Design validation and evaluation boards for new ASIC/SoC platforms. • Collaborate with ASIC/SoC teams to validate hardware interfaces and system functionalities. • Conduct lab bring-up, debug, and hardware validation using high-end equipment (oscilloscopes, VNAs, BERTs). #Productization & Mass Production Collaboration: • Work directly with CM, JDM, ODM partners to bring hardware from prototype to production. • Address and resolve DFM (Design for Manufacturing), DFT (Design for Test), and yield-related issues. • Drive continuous improvement of hardware designs for manufacturability, cost, and quality. • Support pre-production builds, validation, and troubleshooting during ramp-up phases. ✅Qualifications • Bachelor’s or Master’s degree in Electrical/Electronics Engineering or related field. • 8+ years of hands-on experience in high-speed system hardware design and development. • Strong design experience with PCIe Gen3/4/5, USB 3.2/4.0, Thunderbolt 3/4, MIPI (CSI/DSI), and similar high-speed protocols. • Deep expertise in SI/PI analysis (tools like Ansys HFSS, Keysight ADS, Cadence Sigrity). • Proficiency with PCB design tools (Allegro, Altium, Mentor Xpedition) and PCB stack-up design. • Solid understanding of ASIC/SoC validation, hardware bring-up, and integration testing. • Experienced working with CM, JDM, ODM partners and managing DFM/DFT/yield issues for high-volume production. • Familiarity with lab instruments for signal measurement, validation, and debugging. ✅Nice to have: • Prior experience in IC design house, OEM/ODM/JDM, or system integrator roles. • Exposure to firmware/software interaction with hardware and system-level integration. • Familiarity with industry compliance standards (e.g., USB-IF, PCI-SIG). • Excellent problem-solving skills and the ability to drive issues across multi-disciplinary team

Purpose of this Position 深入研究高速訊號，在高速硬體電路Signal Integrity上提供最佳設計且確保生產品質 Major Areas of Responsibility 專案研發 - Perform high speed signal integrity simulation including 10G/40G、25G/100G、PCIE、SATA、DP、USB、DDR3/DDR4/DDR5. - Perform pre-layout, layout constraint, and post-layout simulation processes. - PCB stackup design and layout review for high speed signal and PDN. - Build component models to ensure the correlation between SI/PI simulation and measurement. - Solid SI experience in resolving technical issues and performing detailed analysis. 團隊合作 - Collaborating with EE teams to refine high-speed signal performance. - Collaborate with the layout engineer to provide clear layout guidelines and enhance footprint optimization.

1. 硬體電路設計與開發 • 根據專案需求進行系統架構規劃與電路設計（數位、類比、高速訊號） • 繪製原理圖（Schematic）與零件選型 • 與 PCB Layout 工程師合作進行電路板設計與佈線優化 • 評估並引入新技術與元件（CPU、GPU、DDR、Type-C、PD 等） 2. 功能實現與原型驗證 • 製作與驗證原型機（Prototype / EVT） • 分析與解決電路功能異常、訊號完整性（SI）及電源完整性（PI）問題 • 測試高速介面（USB, PCIe, HDMI, DP, Thunderbolt）與相容性驗證 • 優化功耗與散熱設計 3. 測試與驗證 • 制定並執行硬體測試計畫（功能測試、效能測試、穩定性測試） • 協助進行安規（EMI/EMC）、安規認證（UL、CE、FCC 等） • 進行系統相容性測試（各型周邊裝置、作業系統） • 與測試團隊合作分析並修正問題 4. 跨部門專案協作 • 與機構工程師（ME）協調 PCB 尺寸、元件擺放與散熱方案 • 與軟體工程師（SW）共同除錯（Debug）與韌體開發支援 • 與專案經理（PM）對齊時程與需求 • 與供應商（ODM/OEM/零件廠）討論設計、良率與成本 5. 量產支援與問題解決 • 支援試產（PVT）與量產（MP）階段的硬體異常分析 • 協助改善製造良率與穩定性 • 處理現場生產問題（SMT、組裝、測試工站） 6. 文件與版本管理 • 編寫與維護設計文件（原理圖、BOM、設計規範） • 設計變更（ECO/ECN）與版本控制 • 測試報告與問題追蹤（Issue Tracking）

Job Summary: 1. We are looking for a highly skilled and experienced Senior Hardware Design Engineer to join our server development team in Taipei. 2. The ideal candidate will be responsible for high-speed hardware design, schematic capture, debugging, and working cross-functionally with layout, validation, firmware, and manufacturing teams to deliver high-quality server products and add-on cards. Key Responsibilities: 1. Responsible for schematic capture, layout review, BOM generation, and debugging/testing of server motherboards and add-on cards. 2. Collaborate with layout engineers, BIOS and firmware engineers, validation and test engineers, and cross-functional teams to identify and resolve engineering issues early in the development cycle. 3. Participate in and contribute to design reviews, architecture discussions, and project planning. 4. Prepare and maintain technical documentation, including product specifications, layout guidelines, test procedures, and design review reports. 5. Ensure product compliance with engineering specifications, safety, and energy regulations if any (e.g., ErP), and customer performance expectations. 6. Provide clear documentation and technical support to contract manufacturers and production teams during prototype and mass production stages. 7. Lead root cause analysis and provide corrective actions for hardware-related production or field issues. Required Qualifications: 1. Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field. 2. Minimum 5 years of experience in hardware design for server, PC, or embedded systems. 3. Proficient in schematic capture tools (e.g., OrCAD). 4. Solid understanding of high-speed signal integrity, power delivery design, and board-level debugging. 5. Hands-on experience with lab equipment such as scopes, logic analyzers, and multimeters. 6. Strong problem-solving and analytical skills. 7. Good communication and documentation skills in both English and Mandarin.

1. Support customer projects from design-in, design-through to mass-production. 2. Team work with AE, FAE, RD and QA to solve problems.

因應全球AI應用的發展，公司業務持續成長中，宜鼎國際正在尋找ARM 硬體研發工程師加入我們的團隊！ 我們致力於服務我們的顧客與合作夥伴，鼓勵面對面的互動和團隊合作。如果您擁有相關經驗，並對科技產業充滿熱情，誠摯地邀請您加入我們優秀的團隊，親身體驗我們充滿活力的公司文化。 【工作地點】 此職位的辦公室設在交通便利的新北市汐止，距離 捷運南港展覽館站 或 汐止/汐科火車站 或 交流道 僅3-10分鐘車程，大樓就有停車位、Youbike及豐富的公車選擇，讓您的通勤更加便捷。 辦公大樓過個馬路就到好市多Costco，中午或下班採買日用品超方便，使您的工作和生活更加平衡。 【主要職責】 1. Qualcomm/NXP電路設計與驗證 2. Layout Placement Review and Layout Check 3. 協助生產單位導入量產測試 4. 協助不良產品分析 【我們提供什麼】 在全球AI解決方案與工業級儲存領導品牌的公司中實現自我！ 在「一群夥伴、一同經營」核心精神中，積極經營自有品牌，與公司一同成長，共享豐厚的發展機會和福利！ 加入宜鼎國際，一起寫下值得回憶的故事！

1.需具備10年以上半導體封裝或電子元器件封裝領域從業經歷，熟悉封裝全流程技術細節，包括但不限於引線鍵合、倒裝焊、晶圓級封裝、系統級封裝（SiP）、功率器件封裝等主流工藝，瞭解不同封裝形式的技術特點與應用場景，全新產品開發（製圖、框架設計、耗材新開發、全新封裝設備評估、無到有） 2.需擁有 10年以上研發團隊管理經驗，曾帶領 20人以上 RD 團隊開展工作，具備團隊組建、人才梯隊建設能力，能根據專案需求合理分配人力，制定清晰的團隊發展規劃，培養核心技術骨幹。 3.熟悉研發專案管理方法論，能主導從專案立項、需求拆解、方案評審到測試驗證、量產交付的全流程推進，具備跨部門協作能力（如與生產、採購、品質部門對接），確保研發目標按時達成。

As a hardware design engineer who is responsible for completing assigned projects from development through to end of life, including creating schematics, check layout, component survey, specifications and datasheet study, motherboard and system bring up, bug fix, customer issues analyze, even support colleague's projects. 1. Designing high speed PCB circuit of x86 server. 2. Designing high speed PCB circuit of Broadcom ASIC for high-bandwidth network switching products. 3. Performing all the circuit design by using OrCAD tool. 4. Knowing the layout tool Allegro and can handle the tool. 5. Need to validate the server / switch. 6. Need to debug the circuit with digital scope. 7. Need to co-work with validation/ BIOS/ firmware/ software team to solve the issues 8. Co-work with validation engineers to solve the issues 9. Ensure product conforms to engineering specifications, and regulatory and customer performance expectations. 10. Transfer products to manufacturing with clear documentation and help C.M. and technical support to solve problems. 11. Perform other duties as assigned.

SSD Hardware Design and Verification: Job responsibilities: SSD HW SI/PI/EMC design and verification quality assurance. 1.SSD HW circuit and PCBA board level design and assembly. 2.Component-level selection and verification. 3. Driver-level SI/PI/EMC design and verification. 4. System-level compliance verification.

Job Summary: This position's responsibilities include enhancing and debugging analog and digital IC products, developing reference circuits, writing datasheets and application/design notes, and providing application support for computing customers. Essential Functions: • Work with design engineers, field applications team, and marketing to enhance and debug analog and digital IC products. • Develop application reference circuits. • Write datasheets, application notes, design notes. • Provide application support for key customers and field application engineers Qualifications: • 4+ years of hands-on experience in switch mode power designs including DC/DC, AC/DC, or inverters. • MSEE or higher required • Fluent communication skills in English • Excellent writing and presentation skills • Previous experience in SI/PI analysis, computing system power design, power supply manufacturer, or power management IC company desired

1. In-depth knowledge of PCB layout, OrCAD/Allegro tools, circuit design, and PCB structure. 2. Prepare technical documentation including product specifications, layout instructions, test procedures, etc. 3. Transfer products to manufacturing with clear documentation and help C.M. and technical support to solve problems. 4. Hardware engineer need co-working with PM, BIOS, IPMI, EMI, Thermal, ME RD friendly. Need have good team work. Need to have the concept of project ownership. 5. Need have power VR and component design knowledge 6. Resolve complicated issues and drive to root cause on critical engineering problems

1. 能夠了解主板的線路及其動作方式與原理並獨立完成設計。 2. 硬體設計問題的初步分析與解決。 3. 負責線路的Net list check 並確認其正確性。 4. 負責產品的方案制定、器件選型、硬體設計、調試等工作 。 5. 編寫產品BOM、生產指導文件等技術資料 。

• Treat all company guests, and visitors with personal, human-to-human interaction, and dignity. • Think differently about operations center services and how they impact the customer experience. The Operator will have an impact on systems, processes, and quality standards which will enhance our exceptional service strategy. • Responsible for viewing and monitoring the video surveillance television monitors for unauthorized and/or unsafe actions. • Responsible for monitoring the access control system computer for visible and audible alarms. • Responsible for the proper operation and monitoring of all life safety, gas storage, access control and loss prevention systems and related subsystems. Must be able to prioritize alarm criticality and utilize available resources effectively. • Dispatch security personnel as required in the event of security or safety alarms, security systems service calls and emergency response dispatches. • Interact with a variety of persons, including: companies, visitors, public safety officials, employees and the general public. • Enforce company policies and procedures. • Maintain Key control. • Notify, assist, and direct emergency personnel as necessary. • Dispatch patrol as needed. • Complete job-related forms and/or logs and incident reports as needed. • Participate in testing of security system on regular maintenance schedule. • Observe and report all unusual activity. • Report all building utility and service issues as observed and instructed to facilities. • Monitor the movements and locations of all account security personnel in order to expedite service requests, and emergency response and to ensure employee safety. • Responsible for proper operation and monitoring of all security telephone, paging, radio and intercom communication systems. • As required provide training for new security operations center personnel. • Manage employee, guest, and visitor comments and complaints with one-touch service. One-touch service means an Operator has the autonomy and authority to handle any customer needs. • Create a positive emotional connection with company's guests, and visitors. • Consistently deliver exceptional world-class security experience . • Shall be discreet and maintain strict confidentiality. • Must maintain composure in handling or diffusing difficult situations.

具備 1~5年 X86或GPU硬體研發經驗 1. 負責伺服器(Server)相關產品之電子電路設計與開發 2. 板階設計和完成相關周邊零件的選用和設計 3. 對於設計進行自我審查(self-review), 和完成零件廠商所提供的審查清單(review/check-list); 並針對與其他板卡橋接之介面做交叉審查(end-to-end cross review) 4. 除錯及問題排除; 並在問題解決後, 整理分析報告. 5. 執行設計訊號量測與驗證 6. 制定量測計畫和整理量測報告 7. 協助工廠將產品導入量產

1. Circuit Design(OrCAD) 2. Layout Review(Allegro) 3. HW Validation and Trouble Shooting 4. BOM Maintenance and P/N Application 5. New Technology Study and Introduction 6. Design Proposal Integration 7. Schedule Control 8. Cross-sectional Collaboration