「R0169 - Hardware Engineer (Multimedia)」的相似工作

Overview: At Ubiquiti, our mission is to rethink IT—not just by making powerful networking technology more accessible, but by delivering frictionless product experiences tailored to our users. This pursuit begins at our R&D Center in Taiwan, where we not only build innovative products, but a culture of trust, transparency, and collaboration. Responsibilities - 5~8 years’ work experience as a Key EE designer for VoIP, Conference, Mobile, or Tablet products. - Mainly focus on system schematic review and mechanical stacking review with mechanical engineers and PCB layout review with layout engineers. - Work with Audio, ME teams to figure out performance issues of radios and work with SI and DQA engineers to qualify features and make sure product quality is ready to move further. - Review design derating and suggest design update due to DFM (design for manufacturing), DFA(design for assembly), and DFC (Design For Cost). - Schematic and BOM maintenance and review. - Write test plans for testing coverage, execute tests, and document test results for projects. - Report projects’ status and issue tracking to the internal team. - Teardown and review new products in the market. - Participate in the hardware design and system architecture of VoIP products, including ATA devices, IP Phones, and voice-enabled access control systems. - Design and implement audio circuits including CODEC, I2S, SLIC/SLAC, analog amplification, echo cancellation (AEC), and noise reduction (NR). - Integrate Ethernet/PoE, USB, SPI, UART, I2S, TDM, and other communication/audio interfaces. - Collaborate with the software team to implement and debug Android/Linux audio drivers, HAL layers, and power control strategies. - Support low-power design techniques such as Dynamic Voltage and Frequency Scaling (DVFS). Minimum Qualifications - Have the MP experience with VoIP, Conference, Mobile, or Tablet products. - Solid knowledge of audio hardware design and VoIP communication protocols (SIP, RTP). - Experience with Android and/or Linux system integration for embedded hardware platforms. - Familiarity with high-speed signal design. - Solid knowledge of audio hardware design and VoIP communication protocols (SIP, RTP). - Experience with Android and/or Linux system integration for embedded hardware platforms. - Proficiency in using OrCAD Capture CIS, Power PCB viewer, and Allegro viewer - Knowledge of electronic components (Ex, R/L/C/Diode/MOS/BJT/Logic ICs/Sensors) - Strong knowledge of ESD, EMI, and Surge. - Debug skills with the basic operation of oscilloscopes and logical analyzers. - Strong knowledge to support the thermal solution. Preferred Qualifications - Experience with DVFS implementation and system-level power optimization. - Background in developing products such as SIP intercoms, IP Phones, VoIP gateways, or voice-enabled control terminals. - Proficient in diagnosing audio issues such as echo, feedback, and electrical noise. - Experience integrating ALSA, PulseAudio, or Android Audio HAL layers. - Leadership in projects - Aggressive, open-minded, and positive attitude - Familiarity with the network configuration - Familiarity with test equipment like TDR, Network Analyzers

About Ubiquiti At Ubiquiti Inc., we create technology platforms for Businesses, Smart Homes, and Internet Service Providers, driven by our goal to connect everyone, everywhere. To date, Ubiquiti has shipped over 100 million devices worldwide, from ISP networking products to the next generation of IT solutions. Our growth is made possible by the dedicated team of hundreds behind the scenes. From software developers and product managers to designers and strategists, Team UI is driven to achieve our common goal: Rethinking IT. At Ubiquiti, you’ll heighten your potential and broaden your horizons, all while shaping the future of connectivity. Role Summary As a Hardware Engineer at UI, you will be responsible for the electrical design of consumer electronic products. We are looking for candidates who thrive in a fast-paced start-up-like environment. In this role, you will be the owner of all aspects of EE hardware design, including circuit/board design and validation. To be successful, you need to be highly motivated and detail-oriented while showing the highest standards of responsibility. Responsibilities - Design UI’s future products by owning architecture selection, electrical design, and validation. - Direct and review PCB layout and electrical simulation teams. - Design validation: complete functional verification, signal characterization, power modeling/test, and system coexistence testing. - Troubleshoot, debug, and resolve issues during development, including factory prototype builds. - Bring your design to mass production by setting factory test requirements and assisting in software bring-up. Minimum Qualifications - BS degree in electrical engineering or related field - 5+ years of hands-on experience in consumer electronics/embedded systems design, prototyping, bringing up, debugging, functional verification, and NPI support, DFx (Design for cost, test, manufacturing) experience - Experience with Cadence OrCAD, Allegro, PADS, or equivalent. - Electrical engineering or design experience in one or more of these areas: SOCs/MCUs, -- Power Management, Signal Integrity, and/or Analog/RF. - Knowledge of PoE converters, DC/DC converters, power management methods, audio circuit design, high-speed, and analog circuit design - Knowledge of processor architecture, digital circuit design, and various communications protocols such as I2C, UART, SPI, Ethernet, and USB, etc. - Knowledge of developing robust designs for ESD, EMI immunity, and RF Desense. - Ability to be hands-on in the lab and want to be in the details (soldering, oscilloscopes, data acquisition). - Team player with good communication skills Preferred Qualifications - Master's degree in electrical engineering or related field. - Knowledge of high-speed digital interfaces such as PCIe, DDR3/4, MIPI, LVDS, etc. - Experience with analog design, low power design, audio acoustics, various RF technologies (such as WiFi/BLE/ Zigbee/NFC) - Experience with physical characterization of sensors such as light sensors, ToF sensors, Temperature sensors, Radar sensors, G-sensors, etc.

About Ubiquiti At Ubiquiti Inc., we create technology platforms for Businesses, Smart Homes, and Internet Service Providers, driven by our goal to connect everyone, everywhere. To date, Ubiquiti has shipped over 100 million devices worldwide, from ISP networking products to the next generation of IT solutions. Our growth is made possible by the dedicated team of hundreds behind the scenes. From software developers and product managers to designers and strategists, Team UI is driven to achieve our common goal: Rethinking IT. At Ubiquiti, you’ll heighten your potential and broaden your horizons, all while shaping the future of connectivity. Role Summary We are seeking a highly motivated hardware engineer to join our team developing enterprise-grade network and storage products, including WiFi routers, Switches, Storage, and Server systems. This role will be responsible for hardware architecture design, schematic development, system integration, validation, and cross-functional collaboration throughout the product lifecycle. The candidates will have a strong background in digital circuit design, system-level thinking, and experience with high-speed interfaces such as DDR, Ethernet, PCIe, and so on. You will collaborate closely with layout, mechanical, RF, DQA, firmware, and manufacturing teams to deliver robust and scalable hardware solutions. Also, one must be very aggressive in providing suggestions and comments at the design stages and thinking widely, and making decisions for designs. Responsibilities - Lead or contribute to hardware architecture planning, including CPU/SoC platform selection, Ethernet switch/PHY ICs, Interface solutions, and high-speed interfaces (PCIe, Ethernet SerDes, USB, SATA). - Design and review schematics, select components, and manage and optimize BOM for cost, quality, and manufacturability. - Collaborate with layout engineers to optimize PCB stack-up, impedance control, signa,l and power integrity. - Work with RF, DQA, and SI teams to validate functionality, debug issues, and ensure product performance and reliability. - Define and execute hardware validation test plans, document results, and assist in root cause analysis. - Experience with EMC/ESD design and debugging techniques. - Evaluate and recommend updates for DFC (Design for Cost), DFM (Design for Manufacturing), and DFA (Design for Assembly). - Tear down competitor products to assess system architecture and solution. - Provide regular updates on project status and coordinate with cross-functional teams to align milestones and deliverables. Requirements - MS degree in Electrical Engineering or a related field. - Solid understanding of system-level hardware architecture for Networking, Storage, Server products, and RF fundamentals. - Hands-on experience in digital circuit design, high-speed interface design (PCIe, Ethernet SerDes, USB, SATA), and power management (LDO, DC-DC, PMIC). - Familiar with schematic and PCB design tools such as OrCAD, Allegro, or PADS. - Proficient with lab equipment such as oscilloscopes, logic analyzers, network analyzers, and power supplies. - Strong communication and teamwork skills, capable of working in a fast-paced, cross-functional environment. Preferred Qualifications - Experience in enterprise Switch/AP Router, Storage, or Server system hardware development. - Highly organized in managing hardware platforms and proactive in developing innovative product concepts. - Strong self-motivation with a proven ability to drive complex technical issues to resolution. Benefits - An international work environment with opportunities to collaborate closely with global development teams. - Excellent working conditions in a supportive and innovative atmosphere. - Competitive compensation package, including attractive salary, perks, and benefits. - Comprehensive group and health insurance coverage. - Complimentary drinks and snacks are available in the office.

Ubiquiti Taipei office is looking for a Hardware Engineer who shares our passion for innovation and technology and desire to do something extraordinary. This position will enable you to participate in hardware design for Ethernet products, like Ethernet Switches and Gateway routers with worldwide impact. You will be in touch with our R&D labs from different countries around the globe. We expect you to bring your experience, enthusiasm, and creativity wherever you go and put them in the work you do. You should be able to think out of the box when finding solutions to new problems and make things work. Responsibilities: - Hardware circuit design, PCB layout review, design verification testing. BOM maintenance, production and RMA failure analysis - Survey and evaluate new solutions/platforms - Involved product life phase from NPI, MP, to EOL - Co-work with function teams, PCB layout, component engineering, firmware, mechanical engineering, electrical power engineering, thermal engineering, QA, software engineering, project management, ID, compliance engineering, etc.

At Ubiquiti, our mission is to rethink IT—not just by making powerful networking technology more accessible, but by delivering frictionless product experiences tailored to our users. This pursuit begins at our R&D Center in Taiwan, where we not only build innovative products, but a culture of trust, transparency, and collaboration. Responsibilities (What he/she will do after join UI): - 5~8 years’ work experience as a Key EE designer for Mobile, Tablet or AP products. - Mainly focus for system schematic review and mechanical stacking review with mechanical engineers and PCB layout review with layout engineers. - Work with RF engineers to figure out performance issues of radios and work with SI and DQA engineers to qualify features and make sure product quality is ready to move further. - Review design derating and suggest design update due to DFM (design for manufacturing), DFA(design for assembly) and DFC (Design For Cost.) - Schematic and BOM maintenance and review. - Write test plans for testing coverage, execute tests, and document test results for projects. - Report projects’ status and issue tracking to internal. - Teardown and review new products in the market. Minimum Qualifications (MUST-haves) : - Have the MP experience with Mobile, Tablet or AP products.. - Familiarity with high-speed signal design. - Proficiency on using OrCad Capture CIS, Power PCB viewer and Allegro viewer - Knowledge of electronic components (Ex. R/L/C/Diode/MOS/BJT/Logic ICs/Sensors) - Strong knowledge of ESD, EMI and Surge. - Debug skills with the basic operation with oscilloscopes, Logical Analyzers. - Strong knowledge to support the thermal solution.

 Project platform HW system design integration  EE Schematic design  PCB layout design and review  RFQ/PRD research and feedback  Component survey and technology study  Bom creation and maintain  EE circuit/system design developing , validation and debugging.

Key job responsibilities: • Minimum 10 years of technical working experience, and knowledge of consumer, enterprise, and handheld product design • Expertise in embedded system design, system PWR architecture, and related electrical design skillset & knowledge • Expertise in electrical engineering and knowledge of multiple related areas (e.g. SoC architecture, DCDC power design) • Expertise in electrical engineering and knowledge of multiple related areas (Signal Integrity/Power Integrity, and various communications protocols such as I2C, UART, SPI, USB, MIPI, I2S, etc. • Familiar with battery knowhow experience, and power budget estimation. • Experience and familiarity with lab equipment including oscilloscopes, current/voltage probes, power meters, data loggers, and electronic loads.

1. 工業平板電腦(ARM Platform)及相關週邊硬體電路設計。 2. 硬體電路設計驗證(SI, PI, USB, PCIE… etc.)。 3. 硬體電路Debug 與對策 (FCC,CE,ESD,…etc.)。

1.電池模組整合：熟悉 BBU 電源與電池模組（BMS、電芯、保險絲、Relay）的電氣介面。 2.硬體電路設計與驗證：包含原理圖設計、PCB Layout指導、電路模擬與實測驗證。 3.安規與可靠度測試：配合UL1973、UL9540A、IEC62619、EMC/ESD/安規要求進行設計與調整。 4.量產導入：支持 EVT/DVT/PVT 全流程，協助產線測試治具規劃與量產品質控制。 5.跨部門合作：與機構/軟體/系統工程師協作，加速新產品開發

職務介紹： 做為一名硬體研發工程師，您將負責產品評估、硬體規劃及設計，Layout佈局及走線檢查，電子電路訊號量測及除錯系統設計，零件料號申請、BOM表建立與修改，以及專案技轉量產，品質分析等。主要產品為Intel /AMD Server, x86 Motherboard, ODM專案等產品開發。 職務匯報： 此職務會匯報於研發主管 主要工作內容： 1. 電子電路之研發，新產品設計，硬體除錯，良率提升等工作 2. 硬體線路及工程樣品製作 3. 研發新產品，改善現有產品，改善作業流程 4. 與客戶或公司的硬體部門的同仁共同研發或解決問題 5. 舊專案維護或改良，BOM變更與維護 人才需具備： 1.工作經驗：3年以上Server/PC/Notebook相關產業x86硬體研發經驗為佳 2.學歷要求：大學、碩士 3.科系要求：電機電子工程相關為佳 4.語文條件：英文(讀:中等、寫:中等) 5.擅長工具：擅長OrCAD, Allegro 等EDA軟體、Microsoft Office 軟體和示波器、電表等儀器之操作 6.工作技能：電子零件及電子線路解析能力 7.其他條件：細心、思考靈活，積極主動，良好的溝通能力，富有團隊合作精 神以及強烈的學習意願也是我們重視的條件。

1. In-depth knowledge of PCB layout, OrCAD/Allegro tools, circuit design, and PCB structure. 2. Prepare technical documentation including product specifications, layout instructions, test procedures, etc. 3. Transfer products to manufacturing with clear documentation and help C.M. and technical support to solve problems. 4. Hardware engineer need co-working with PM, BIOS, IPMI, EMI, Thermal, ME RD friendly. Need have good team work. Need to have the concept of project ownership. 5. Need have power VR and component design knowledge 6. Resolve complicated issues and drive to root cause on critical engineering problems

1. 硬體系統研發設計、電子電路設計。 2. CPLD/FPGA硬體電子電路相關設計。 3. 評估部件、裝置或系統的性能、撰寫HW規格說明和EMC驗證。

從事無線通訊模組硬體開發、設計等工作 主要技能需求為擁有電子電路或通訊電子相關學能，對於高速訊號完整性處理與有線/無線通訊介面設計有經驗者

1. Lead the Engineering team to integrate hardware, firmware, software, and process technologies to further formulate and enhance the foundation of company business unit. 2. Continue to develop in-situ clean technology for MOCVD reactor. 3. Continue to develop full automation as a required element for company future product. 4. Continue to support new technology and new tool development for high efficiency solar cells and GaN related high power/high speed electronics. 5. Market penetration through not only technical collaborations but also through new technology trend in need of new MOCVD product technology.

1. 進行電子產品硬體系統之研發與設計。 2. 規劃、執行產品電力單元設計。 3. 負責產品量產導入工廠計劃。 4. 負責產品技術轉移，並導入量產。 5. 提供其他部門相關技術支援。

ᴘᴜʀᴘᴏꜱᴇ ᴏꜰ ᴛʜɪꜱ ᴘᴏꜱɪᴛɪᴏɴ 此職位負責無線通訊產品的 EE 硬體設計與開發工作，涵蓋從產品需求分析、電路設計、驗證測試到量產導入的完整流程。需確保設計品質、成本效益與產品可靠性，並持續推動設計優化與技術創新。該角色將與跨部門團隊密切合作，解決硬體設計挑戰，確保產品具備市場競爭力與高效能表現。 ᴍᴀᴊᴏʀ ᴀʀᴇᴀꜱ ᴏꜰ ʀᴇꜱᴘᴏɴꜱɪʙɪʟɪᴛʏ • 負責工業級無線網路產品的 EE 硬體設計與開發。 • 規劃並執行產品測試與驗證（如 Power、Thermal、EMC/EMI 測試）。 • 承擔電路設計相關工作，包括架構規劃、原理圖設計及零件選型。 • 評估新技術的應用可行性，並適時提出系統架構優化建議。 • 協助解決客戶端產品問題及生產製程中出現的硬體設計相關問題。 • 參與部門任務執行，並進行專業知識的分享與傳承。 • 與跨部門團隊（PM、SW、ME、Thermal、PE）合作，推動並確保產品開發專案進度達成。

1.非隔離式DCDC設計 2.BBU (battery backup unit) 整合式設計 3.硬體驗證計劃制定及執行 4.專案可行性評估

About Ubiquiti At Ubiquiti Inc., we create technology platforms for Businesses, Smart Homes, and Internet Service Providers, driven by our goal to connect everyone, everywhere. To date, Ubiquiti has shipped over 100 million devices worldwide, from ISP networking products to the next generation of IT solutions. Our growth is made possible by the dedicated team of hundreds behind the scenes. From software developers and product managers to designers and strategists, Team UI is driven to achieve our common goal: Rethinking IT. At Ubiquiti, you’ll heighten your potential and broaden your horizons, all while shaping the future of connectivity. Responsibilities - Perform electrical validation of high-speed interfaces such as PCIe Gen3~Gen5, Ethernet (802.3 10G/25G/100G/400G), DDR4/5, SATA, and USB3 - Perform electrical validation of low-speed interface, including I2C, SPI, MDIO, eMMC, and RGMII. - Perform chip-to-chip SerDes signal validation, including SGMII+, UXSGMII interfaces. - Plan and execute power testing strategies for multiphase power stages and DC buck converters. - Perform power integrity validations, including ripple noise analysis, power sequencing verification, electronic load (E-load) operation, and power supply unit (PSU) evaluation. - Develop and execute test scripts under Linux environments, familiar with shell commands and automation scripting. - Collaborate with the HW team and chip vendor to define and document SI/PI validation plans and requirements. - Analyze and identify SI/PI issues, and work closely with HW, FW, layout teams, and chip vendors to develop improvement solutions that enhance electrical performance and signal integrity quality. Requirement - Solid experience with SI test equipment (oscilloscope, BERT, VNA, TDR). - 3+ years of hands-on experience in Signal Integrity, and SerDes/PCIe/USB/DDR validation. - Solid understanding of compliance testing methodologies, eye diagram, and litter analysis. - Strong understanding of low-speed interface protocols and comprehensive experience in AC/DC characteristic validation. - Bachelor’s/Master’s degree in Electrical Engineering, Electronics, or related fields. - Excellent problem-solving skills, ability to debug SI/PI issues, and strong cross-functional communication with HW design and layout teams. Preferred Qualifications - Experience working on system-level signal validation in server, networking, or storage platforms with high-speed interfaces. - Familiarity with Power Integrity validation, including power sequence, ripple noise, OCP, and SCP testing. Benefits - International work environment and collaboration with global development teams - Excellent work conditions - Competitive package: great pay, perks, and benefits - Group insurance and health coverage - Flexible working hours and patterns - Complimentary drinks and snacks at the office

1. 熟悉Server Board、x86或ARM based (nVidia、Rockchip、TI、Qualcomm..等) 硬體設計。 2. 硬體線路設計、驗證及除錯，PCBA layout檢查及驗證。 3. 主導專案研發進度，管理硬體研發團隊，掌控設計品質與產品開發進度。 4. 研究產業新技術，導入創新產品設計。 5. 管理零件承認並執行CIS導入設計流程。 6. 跨部門溝通協調，軟韌體/機構/設計測試驗證/生產製造等系統整合相關問題。 7. ODM產品設計專案的技術管理，包括帶領團隊從RFQ到設計實現的全過程，與國際客戶直接溝通，理解並轉化其需求為具體設計方案，作為技術窗口參與客戶會議，提供技術解決方案。

~~公司近汐科火車站(走路5分)，至台北車站約16-18分，通勤方便~~ ~~彈性上班8:00-10:00，下班17:00-19:00，工作滿八小時~ ※面試後，依學、經歷核定任用職務與薪資※ ※二年以上經驗佳※ 1. 醫療相關產品硬體訊號量測與功能驗證。 2. 線路繪製與硬體電路設計、Layout檢查。 3. 規劃驗證流程及撰寫驗證SOP。 4. 設計實驗釐清相關Bug問題，並進行解決方案評估。 5.協助工程試產，生產問題處理。 6. 支援其他主管交辦臨時事項或專案任務。