「Product Application Engineer (High Speed Backplane)」的相似工作

1.每月都會有出差至中南部,要能配合過夜出差,時長不一定,每週可能三天也可能到五天。 2.出差另有過夜及路程津貼,中南部備有公司宿社。 3.初期會先留桃園廠內學習機台組裝。 3.經常性的要配合台積電、日月光等科技大廠巡檢設備維修保養，或至客戶端進行檢查維修及保養本公司產品壓濾機。 4.俱有電機、水電、機械相關專長為佳;無經驗亦可。 5.具有手排自小客車駕照並且有實際上路經驗。 6.每月需一個周六上班(假日加班計,全公司統一上班日)。 7.到職滿三個月會考核調薪;到職滿一年考核調;滿一年以上員工每年除年終獎金外,會有三次績效考核獎金發放.

The Product Design Engineer for overpass solutions is mainly focusing on developing high speed cable solutions for front IO, near chip and Co-package chip applications. This position will highly engage with customer in early design stage, providing technical expertise on mechanical, cable route, and application hardware. Role and Responsibilities - Work closely with customer and their contract manufacturers to understand their design requirements, evaluate the challenging, and provide full workable interconnection solutions including connector interference, connector fitting structural, cable management, and application hardware. - Mechanical design and concepting in 3D model:  Front IO cage overpass solution.  Custom design for cage mechanism.  Work with thermal engineer to optimize thermal solution for customer.  Near chip overpass solutions:  Provide technical guidance to customer on product selection.  Design for different pairs configuration, connector fitting mechanism, cable output and management, and application hardware if needed.  Co-package copper overpass solutions:  Work with customer to complete the design that our connector can fit into customer’s package, including optimize connector layout in substrate, alignment feature and fitting mechanism, application hardware. - Verify if the design if it meets design objectives by varies engineering tools such as tolerance analysis, FEA, failure mode effect analysis… - Create complete cable assembly drawing including two ends solutions, wiring chart, cable pre-bending geometry(if needed). - Work with cross function team(mechanical, signal integrity, manufacturing) to ensure the design can be transited to mass production. - Create test plan and strategy for product in NPI status to verify the reliability, robustness in application before shipment.

The Lead Engineer job is to design and development of Power connector and Cable. • 8 years above connector/cable design working experience. Your job is to provide power solutions to data center, telecom, industrial, and automotive customers. Work closely with key customers and management to develop custom products. • Create drawing, specification documents required to define and build products: drawings, material specifications, bills of materials and manufacturing processes. Work with cross-functional, multi-site teams to develop solutions. • Provide technical support to Sales and marketing personnel including technical training, presentations and customer visits. • Coordinate, analyze and assess testing and qualifications in order to insure product conformity with specifications. Assess the quality and functionality of prototypes and samples for customer use and adherence to performance standards. • Provide support to manufacturing facilities on cost down, quality, customer issues. • Stay abreast of technological developments in the connector and interconnection industries. • Apply patent request when applicable in order to protect intellectual property.

The Application Development Engineer will participate in the design and development of unique and/or proprietary high-speed custom cable assemblies which will integrate into the customer’s system. These products are developed in response to specific customer application needs. Role & Responsibilities • Customer Engagement & Product Selection: o Work closely with customers to ensure they select the best cable solutions from our portfolio for their application. o Provide technical guidance on product selection, system architecture, and integration best practices. o Push back on customer design decisions when necessary to maintain optimal cable performance. o Share lessons learned, highlighting potential problem areas and best practices. • Custom Design & Engineering Documentation: o Mechanical design of custom cable configurations with detailed engineering drawings. o Develop and validate mockup systems with mock cables to demonstrate the best architecture. • System Architecture & Cable Management: o Help customers architect their compute trays for optimal hardware layout and cable routing. o Design cable management systems to ensure proper routing and performance. o Develop tools for cable installation and removal. • Technical Support & Knowledge Sharing: o Provide onsite support at customer and ODM locations during early build phases. o Conduct technical presentations and training sessions to coach customers on correct product usage. o Provide technical support to Sales and marketing personnel including technical training, presentations and customer visits. o Stay abreast of technological developments in the connector and interconnection industries. o Apply patent request when applicable to protect intellectual property. • Project Management & Collaboration: o Participate in multiple weekly conference calls with customers, ODMs, and internal teams throughout the development process (typically lasting a few months per project). o Manage 10-12 concurrent projects, ensuring timely support and execution. o Draw on the global engineering capabilities of other divisions for collaborative interconnect product development initiatives to serve a total interconnect solution to the customer. o Report regular project updates

Introduction to the job Do you like challenges and do you want to work in a fast pacing supply chain environment to support some of the biggest semiconductor companies worldwide? Are you familiar with Logistics Operations and like to managing urgent demands on a daily basis?  If this sounds like you and if you have a strong customer oriented mindset, here is your mission. Role and responsibilities For our Global Operations Center in Taiwan we are searching for Supply Chain Professionals. You fulfill the demand of our customers for spare parts and tools for their maintenance activities on some of the most complex machines in the right quantity and at the right time & cost. Time is of the essence to ensure a seamless production of our customers without interruptions on our machines. -Handling of urgent material requests from worldwide customers in a rolling 24/7 shift system with the right customer focus, while meeting all milestones related to communication and execution -Monitoring of worldwide shipments  -Ability to resolve complex issues and drive improvements to further optimize processes -Ability to support escalations and provide communication proposals for review -Constructive and reliable communication with worldwide stakeholders from all departments within ASML -This position requires shift work. Education and Experience Bachelor's Degree in related subject i.e. Supply Chain Management, Information Science, Engineering etc. preferred -Minimum 1 year of relevant experience in an international company, semiconductor industry is preferred -A tactical thinker with strong interpersonal and communication skills -Analytical thinking and ability to organize and prioritize workload Skills Working at the cutting edge of tech, you’ll always have new challenges and new problems to solve – and working together is the only way to do that. You won’t work in a silo. Instead, you’ll be part of a creative, dynamic work environment where you’ll collaborate with supportive colleagues.  There is always space for creative and unique points of view. You’ll have the flexibility and trust to choose how best to tackle tasks and solve problems. To thrive in this job, you’ll need the following skills: -Stress-resistant; act under high pressure -Flexible; willing to go the extra mile for the customer -Excellent professional communication in English, written and oral -Drive for results; does not stop until solution has been found, even when obstacles arise -Team player -Change management competencies -Convincing, pro-active and “can do” mentality -Cultural awareness -Experience with ERP system(s), SAP R/3 knowledge preferred -Ability to prioritize Diversity and inclusion ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions.

• As a senior SI engineer you will lead the SI team to work with our customers, internal product development, product marketing, and sales teams. • Provide technical support to sales team for ACS high speed products and help customers to solve their interconnect challenges. • Assist in developing strategies to distinguish our products and solutions from those of our competitors. • Provide guidance and training to junior team members to enable them to effectively handle channel simulation across PCIe and Ethernet BUS, as well as optimize customers’ PCB layouts within the system budget. • Develop SI strategies for customer pinouts and routing challenges. • Design and evaluate next generation production test platforms. • Design, build, and measure circuit boards for measurement and verification of products. • Conduct research on the latest specifications of the committee's next-generation platform and provide integrated solutions for customers.

Our customer’s success depends on our ability to solve their design challenges and provide interconnect solutions. We value our relationships with these companies and depend on our Field Application Engineers – FAE, to foster this ongoing technical partnership. As an Field Application Engineer, you will engage with the design teams at our key customers to provide technical expertise and solutions to meet their needs. This position combines design, engineering knowledge, and business techniques to drive the growth strategy. • Provide world class technical support to our customers (engineer to engineer) • Build technical relationships with our customer’s engineering teams • Engage customers early in design stage to achieve design win • Understand customers technical requirements and create concepts to solve customer’s interconnect challenges. • Differentiate our products and services above our competitors. • Provide design guidance to customers on innovative interconnect applications against their design requirements. • Understand our customers technical roadmaps to co-work with various business unit development activities to customer needs. • Some travel will be required to meet with customers within different China region.

Your Job As a Digital Business Partner, you will be a key driver of Molex’s digital transformation, responsible for collaborating with global sites across the business unit to identify and implement digital opportunities, optimize business processes, and enhance competitive advantage. You will work closely with teams to ensure digital strategies and solutions align with the company’s overall objectives. This role requires a global perspective, supporting sites in various countries and driving worldwide digital initiatives. You will also collaborate closely with the technical team within the department to ensure effective implementation of technology solutions. What You Will Do •Partner with site leaders to understand business needs and drive digital strategies. •Collaborate with technical teams to develop and implement effective technology solutions. •Lead business process analysis and re-engineering efforts as part of digital transformation •Create and maintain project artifacts such as user stories, process maps, and workflows that accommodate global business practices •Collaborate with global stakeholders to align the solution with business objectives Evaluate emerging technologies and recommend implementation strategies. •Use data-driven insights to identify improvement opportunities and support decision-making. •Promote innovation through design thinking, agile methodologies, and continuous improvement. Who You Are (Basic Qualifications) •Bachelor’s degree or above, preferably in Computer Science, Information Technology, Business Management, or related fields. •5+years of experience as a Business Analyst, with at least 3 years focused on global digital transformation projects •Excellent analytical and problem-solving skills with the ability to address complex, cross-border challenges •Outstanding communication and interpersonal skills, with the ability to work effectively across cultures •Familiarity with data analysis tools and techniques •Experience in requirements gathering techniques and documentation for diverse international stakeholders •Demonstrated success in managing global system rollouts and implementations •Excellency in English speaking and writing What will Put You Ahead • Fluent in English • Excellent communication and interpersonal skills • Experience managing digital transformation projects At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Who We Are As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

1. 出廠前設備之系統組裝、調整、測試作業 2. 調適 AOI 自動光學檢測系統 3. 協助業務處理客戶所提出產品相關應用的技術問題，並提供客戶技術支援服務。 4. 出廠後機台安裝與設備導入 5. 客戶教育訓練與驗機 6.上班地點:龍潭區(須能配合專案出差) 7.其它主管交辦事項

工作內容： 1. 熟悉工業自動化相關產品售後. 2. 熟悉電控, 測試, 產品電路圖知識 3. 用戶現場工控產品更換, 復機 4. 工控產品PCBA level 板件更換 5. 了解售後服務流程 6. 客端工程人員應對, 與問題答覆 7. 參加GTM/GTC流程, 承接新產品售後服務內容規劃 8. 測試製具設計, 發包, 優化 9. 升任國內外產品售後服務培訓講師 工作技能： 技術諮詢與服務;客戶端技術服務業務;運用Auto CAD與Pro-E程式;產品分析及追蹤不良品改善;檢查及檢驗報告結果判讀;流程管理;顧客關係管理;重點客戶管理;客訴/客退要因解析

1.Support Design Engineer on Signal Integrity testing and Debugging on Chip and Demo Board 2.Support Customer projects design-in stage to mass-production. 3.Support Customer projects design review (Schematics, layout, CTS report) 4.Team work with RD, AE and QA on debugging and problems solve.

PRIMARY PURPOSE: We are seeking individuals who are proactive, humble, unafraid of learning new things, and have the potential for growth. The R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. You are responsible for designing and optimizing a product or create valuable or quality of product that will scale with Molex continued growth. As a Product Design Engineer, you will design and evaluate product, identify product requirements and contribute to research and project planning. DUTIES AND RESPONSIBILITIES: 1. Apply design, engineering, and technical expertise to influence cross-functionally and deliver reliable mass production components and solve time-sensitive problems. 2. Make significant contributions to design, development, and validation of different solutions (Specifically focused on the cooling solution for the cage and the design of the connectors.) 3. Manage the product design, provide guidance to team members, and communicate progress, and request feedback to prevent/remove roadblocks. 4. Anticipate and address product design issues or risks, analyze data, and validate product design to suggest or implement design improvements. 5. Conducts feasibility studies for new projects leveraging existing designs while also generating new designs and IP, drives consistency and thoroughness across portfolio. EDUCATION Required: Bachelor’s degree in mechanical engineering, Process Engineering, Manufacturing Engineering or equivalent practical experience. Required Experience and Skills:  8~10+ of work experience as a hands-on engineer.  Possesses thorough understanding of the product development process (Design Concept, EVT, DVT, PVT).  Demonstrated experience working with cross functional teams in English.  Engineering Design Software: NX (preferred), Creo, Pro/E, etc.  Knowledge in molding of different kind of materials, stamping, assembly process, product development process.  Ability to independently complete design and manage projects.  Understand thermal and mechanical of liquid cooling system.  Good problem-solving skill and able to deeply analyze testing failure mode.  Tolerance stack-up Analysis, review thermal, and reliability testing report. Desirable Requirements:  Experience in server or switch liquid cooling systems.  Experience in the high-speed connector industry.  Relevant knowledge of seal product design.  Experience with simulation or performance analysis of liquid cooling thermal solutions, precision machining, brazing (furnace, vacuum), molding (plastic & metal), soldering, stamping/assy, welding or sintering processes.  Passionate about design work and innovation, creating new products to address gaps in the industry.

1.Cable related product line set up into assigned location 2.Drive the cost reduction to be competitive for expanding into new business 3.Develop and implement product business plan with market, industries and customers targets. 4.Gain new opportunities for industrial cable market , especially on ESS and Robot application , create the USD 20M revenue 5.Promote the CMIO product for industrial market segment

【主要職責】 1. 自動控制程式與方案開發 2. 解決客戶端產品應用與整合問題 3. 製作產品/方案培訓教材與擔任講師 4. 製作技術推廣文件 【工作技能】 1. 熟悉程式語言 ( PLC、C++、Matlab、C# 或LabVIEW 其中一種) 2. 熟悉機械手臂、機器視覺整合應用。 3. 熟悉各類工業通訊協議 (Modbus 485、Modbus/TCP、EtherCAT或EtherNet/IP 其中一種) 4. 具軸卡、運動控制應用經驗佳。 5. 具電機控制應用經驗佳 (伺服驅動器、變頻器)。 6. 具圖控應用經驗佳 (HMI、SCADA)。

1. 基本網路維護管理和維護公司的網路基礎設施(機房、防火牆與VPN、伺服器等，確保網路安全和穩定 2. 企業網站管理與維護 3. 公司ERP 及業務管理系統問題協調 4. 使用者軟硬體問題處理，提供技術支持 5. 電腦周邊設備管理與維護、採購＆汰舊換新 6. 公司事務機、公務手機、門禁系統等管理 7. 資訊安全管理制度備份管理，並落實總部政策合規 8. 支援部門事務及其他主管交辦事項

The Hardware Test Engineer provides crucial hands-on technical support for production test systems. This role is responsible for independent execution of issue triage and in-depth troubleshooting of production fallouts. This engineer will also actively contribute to yield improvement initiatives and assist with the development, validation, and maintenance of tester stations and fixtures. Minimum Qualifications: ● BS or MS degree in Electrical Engineering, Electronics Engineering, or a related field. ●0-1 years of practical experience in electronic manufacturing or related hardware testing environments. ● Proficiency in digital and analog circuit analysis, PCBA bring-up, and systematic troubleshooting of test failures. ● Solid command of EE lab instruments (e.g., oscilloscopes, DMMs, power supplies) and proven ability to apply these skills to solve production problems. ● Demonstrated ability to work independently on assigned tasks and communicate technical findings clearly. Preferred Qualifications: ● Foundational experience with PCBA and module failure analysis (FA) techniques. ● Familiarity with production data analysis and simple process improvement methodologies. ● Experience with Linux operating systems in a testing or manufacturing environment. Responsibilities: ● Execute and own the PCBA and module troubleshooting, bring-up, and rework processes from start to finish. ● Maintain and update product troubleshooting procedures and guides as needed. ● Analyze failure data to provide detailed failure analysis findings and clear root cause hypotheses to the test development team. ● Serve as the primary on-site technical contact for manufacturing partners, rapidly triaging production line issues and driving immediate containment actions. ● Collaborate with cross-functional teams (e.g., HW Design, Manufacturing) to ensure test integrity and high product yield.

1.執行新產品開發至量產，擔任客戶與研發部門溝通橋梁 2.與研發單位合作、負責專案規劃、執行與追蹤，管控專案進度和風險管理，每周與客戶會議定期會議中匯報。 3.依照客戶需求制定產品BOM並導入系統 4.可配合出差，協助工廠試產之執行、問題追蹤及解決。 5.專案開發期間樣品進度追蹤及訂單出貨安排管理 6.主管交辦事項

• Interact / Interface w/Amphenol Commercial and High-Speed BU teams on material supply, buffer inventory, manage aging inventory, etc. requirements. • Interface/communicate via e-mails, F2F, phone conversations with key account customer on expedites, COS, part number shipment details, RFQ activities. • Integrate with Sales and BU Product Managers on key Design opportunities. • Integration w/Direct and ODM account teams on key metrics that will deliver growth. • Develop a successful Business Continuity Plan. • Integrate with all BUs to develop an annual cost down plan. • Support Business Management Meetings (QBR), and strategic annual business plans. • Integration with all Bus on key metrics • Market share monitor w/BU and Sales team • Align businesses to deliver customer forecasts. • Integrate and manage PCNs internally and externally w/customers • Manage customers’ Key Initiatives by working with Sales/FAE and BU’s. • Integrate with Amphenol’s BU team to support RBA, Resilinc, plant quals., etc

主要工作職責: • 產品開發與分析方法開發 • 產品製程開發與技術移轉 • 支援產線的問題排解與持續改善的工作: 與工程及製造相關團隊合作。 • 產品設計開發流程相關的文件撰寫與紀錄，遵循變更管制流程與版本管理。 • 其他交辦事項。 • 歡迎化學、材料、工程相關背景人才應徵 職務內容經常與美國團隊溝通合作，且技術移轉需跨部門的團隊溝通，若您具備具備解決問題的能力與團隊合作精神，我們誠摯邀請你加入我們，一起打造高品質、高效率的工作環境！

1. PCB 設計（含原理圖設計、佈局佈線、Gerber 輸出）。 2. 客戶服務(PCIe/USB3相關) - 協助客戶釐清技術問題並提供可行解決方案。 - 參與客戶專案評估與設計審查（Design Review，含原理圖與佈局）並提出建議。 - 協助客戶進行產品特性分析與測試驗證。 3. 具跨部門協作與專案支援能力。 作為硬體研發工程師，您將成為我們團隊中關鍵的成員之一。您的工作將有助於產品的開發和改善，確保我們的產品能夠達到高標準的品質和性能。此職位的發展前景良好，並提供豐富的學習和專業成長機會。 如果您符合我們的要求並對此職位感興趣，請盡快申請並表達您的興趣。我們期待能夠與您共事，一起實現更好的產品和更大的成功。

Your Job Molex is seeking a Senior Mechanical Engineer to join our RF segment. In this role the successful candidate will be part of a world-class engineering team, contributing to the development of the RF connector and RF cable assembly. The successful candidate will be responsible for designing, implementing, and validating RF products that ensure the functionality, performance, and reliability of our RF product. The Senior Mechanical Engineer will use the lab. equipment, and hardware/software integration while collaborating closely with global, cross-functional teams to develop high-performance product solutions. Our Team - RF Product design What You Will Do - Create new products and modify old product based on customer request. - Work with QA and manufacturing engineers to solve quality issues - Perform EWR because of manufacturing improvement, functioning improvement, design change, and so on . - Work with manufacturing engineers to proceed cost reduction actions - Provides technical support to customers, suppliers, and inside product marketing personnel. - Support product test by coordinating with reliability lab (write test request, gather test sample, board etc. Who You Are (Basic Qualifications) - Bachelor’s degree in Mechanical engineering, or related field - 5+ years of experience in RF connector or general connector – components and assemblies. - Good verbal and written communication skills that demonstrate the ability to express complex technical concepts clearly and concisely –Mandarin and English. - Good interpersonal skills to work effectively with others and in a team. - Travel will be required as necessary. - Proficiency in solid modeling experience to generate 3D models & 2D drawings as well as Microsoft Word, Excel, and power point .