「Sr. System Hardware Design Engineer 」的相似工作

The successful candidate will be a self-starter who likes to take responsibility and works best with little supervision. Likes to perform a variety of tasks and have the ability to handle multiple priorities and has previously performed in a similar position. This is a 'hands-on' role requiring a strong technical background and product development experience. Duties: • Identify technical issues, troubleshoot and resolve them by coordinating with R&D, Manufacturing and Field teams. • Participate in customer technical meetings and prepare training programs for internal subordinates. • Hardware validation of Networking, Storage, Server products against customer's infield issues, requirements and Mfg. issues during NPI or RMA. • System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval. • Qualify alternative components for compatibility, cost effectiveness and benchmarking. • Support Manufacturing Engineering and Test Engineers on trouble shooting and resolving technical issues and root cause analysis. • Work with software teams to identify root cause of system failure. • Ability to install software such as Linux based Operating Systems, ONIE, BIOS, BMC, SES. • Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum. Background: Candidates should have 8+ years' experience in either Network, Storage or Server products. Candidates should have the following essential qualifications and experience: • At least BEng. (Hons.) in Electronics or similar. • Strong electrical design and debug skills required. • Familiar with PCIe, NVMe, SAS, SATA, I2C, SPI, DDR buses. • SDRAM timing and integrity analysis for clocks, strobes, S&H, Power bounce, temp stability. • Hands-on design knowledge of latest peripheral chipsets for Gigabit Ethernet, SCSI, SATA, SAS, USB, Ethernet, & PCI cards etc. • High performance RISC / X86 CPUs and architecture including Intel, AMD, MRVL. • Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum analyzer. • Qualify alternative components for compatibility, cost effectiveness and benchmarking. • System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval. • Work with software teams to identify root cause of system failure. • Working knowledge of windows & Linux configuration, installation procedure, network configuration, driver configuration etc. • Working knowledge of Diag, ONIE, BIOS, BMC, Linux and Windows operating systems • Knowledge of the following would be desirable: - Experience of working in medium sized multidisciplinary development teams - Ethernet Switches, Server, Storage products - Orcad Schematics & Allegro PCB layout tools Personal Attributes: The successful candidate will be a self-motivated individual capable of working with a minimum level of supervision in a dynamic team environment. Good interpersonal skills. Be able to communicate effectively (both verbal and written) with members of other teams, departments and clients; a high degree of liaison is needed.

負責x86 系統主機板的硬體研發設計與驗證，確保產品符合性能和可靠性，協助解決設計與生產中遇到的問題。 主要負責x86系統主機板的 1‧線路設計 2.layout review 3. HW issue debug 4. 主機板 BOM

Job Summary: 1. We are looking for a highly skilled and experienced Senior Hardware Design Engineer to join our server development team in Taipei. 2. The ideal candidate will be responsible for high-speed hardware design, schematic capture, debugging, and working cross-functionally with layout, validation, firmware, and manufacturing teams to deliver high-quality server products and add-on cards. Key Responsibilities: 1. Responsible for schematic capture, layout review, BOM generation, and debugging/testing of server motherboards and add-on cards. 2. Collaborate with layout engineers, BIOS and firmware engineers, validation and test engineers, and cross-functional teams to identify and resolve engineering issues early in the development cycle. 3. Participate in and contribute to design reviews, architecture discussions, and project planning. 4. Prepare and maintain technical documentation, including product specifications, layout guidelines, test procedures, and design review reports. 5. Ensure product compliance with engineering specifications, safety, and energy regulations if any (e.g., ErP), and customer performance expectations. 6. Provide clear documentation and technical support to contract manufacturers and production teams during prototype and mass production stages. 7. Lead root cause analysis and provide corrective actions for hardware-related production or field issues. Required Qualifications: 1. Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field. 2. Minimum 5 years of experience in hardware design for server, PC, or embedded systems. 3. Proficient in schematic capture tools (e.g., OrCAD). 4. Solid understanding of high-speed signal integrity, power delivery design, and board-level debugging. 5. Hands-on experience with lab equipment such as scopes, logic analyzers, and multimeters. 6. Strong problem-solving and analytical skills. 7. Good communication and documentation skills in both English and Mandarin.

1. 能夠了解主板的線路及其動作方式與原理並獨立完成設計。 2. 硬體設計問題的初步分析與解決。 3. 負責線路的Net list check 並確認其正確性。 4. 負責產品的方案制定、器件選型、硬體設計、調試等工作 。 5. 編寫產品BOM、生產指導文件等技術資料 。

Synology's portfolio of NAS, IPSAN, networking, and surveillance solutions are depended upon by millions of customers around the world. All of that starts from having a solid foundation to build upon, the hardware itself. The Hardware Division is responsible throughout the entire product development cycle, starting from the initial design, mass production, and then obtaining market feedback. Through every step, we aim for quality and most importantly, reliability. A building is only as strong as its foundation. The same can be said for the hardware powering our solutions. You'll be working with software, firmware, and other hardware engineers to implement and design hardware platforms for maximum reliability. You will: - Create specifications and product design documentation - Schematic capture and PCB layout design - Perform design validation - Verify and optimize for volume manufacturing

Has lead experience for X86 or GPU system. 1. 獨立(或領導一個團隊)負責伺服器(Server)產品之電子電路設計與開發 2. 能進行新技術/概念/晶片世代的研究並透過新案子實踐並提供符合(或超越)市場需要之產品設計 3. 審查設計及驗證之相關文件(Schematic/Layout/Validation Repot/Issue-analysis Report/Product specification…etc.) 4. 產品除錯及問題排除 5. 在不影響產品品質的前提下, 有效率執行設計研發流程; 並將價格(cost)和品質(quality)兩者都放進設計考慮中. 6. 能同時執行多個專案目標並成功完成 7. 能推動跨組織討論,有效率解決技術問題,並主持與客人之技術討論 8. 協助引領團隊並協助其他成員解決問題

1.負責車用 ECU 產品的硬體系統架構設計、原理圖繪製與 PCB layout 規劃。 2.開發基於Renesas、NXP車用 SoC的ECU。 3.設計與驗證高速訊號，如 DDR4/5、SerDes、PCIe、Ethernet、LVDS。 4.建構 8~12 層 HDI PCB、盲/埋孔設計、stacked via 結構與 EMC/EMI/ /ESD對策。 5.協助系統 bring-up、功能測試、信號完整性分析與熱分析。 6.熟悉 ISO 26262 功能安全規範，並導入車規元件與安全設計。

1. Circuit Design(OrCAD) 2. Layout Review(Allegro) 3. HW Validation and Trouble Shooting 4. BOM Maintenance and P/N Application 5. New Technology Study and Introduction 6. Design Proposal Integration 7. Schedule Control 8. Cross-sectional Collaboration

因應全球AI應用的發展，公司業務持續成長中，宜鼎國際正在尋找ARM 硬體研發工程師加入我們的團隊！ 我們致力於服務我們的顧客與合作夥伴，鼓勵面對面的互動和團隊合作。如果您擁有相關經驗，並對科技產業充滿熱情，誠摯地邀請您加入我們優秀的團隊，親身體驗我們充滿活力的公司文化。 【工作地點】 此職位的辦公室設在交通便利的新北市汐止，距離 捷運南港展覽館站 或 汐止/汐科火車站 或 交流道 僅3-10分鐘車程，大樓就有停車位、Youbike及豐富的公車選擇，讓您的通勤更加便捷。 辦公大樓過個馬路就到好市多Costco，中午或下班採買日用品超方便，使您的工作和生活更加平衡。 【主要職責】 1. Qualcomm/NXP電路設計與驗證 2. Layout Placement Review and Layout Check 3. 協助生產單位導入量產測試 4. 協助不良產品分析 【我們提供什麼】 在全球AI解決方案與工業級儲存領導品牌的公司中實現自我！ 在「一群夥伴、一同經營」核心精神中，積極經營自有品牌，與公司一同成長，共享豐厚的發展機會和福利！ 加入宜鼎國際，一起寫下值得回憶的故事！

1. 硬體電路設計與開發 • 根據專案需求進行系統架構規劃與電路設計（數位、類比、高速訊號） • 繪製原理圖（Schematic）與零件選型 • 與 PCB Layout 工程師合作進行電路板設計與佈線優化 • 評估並引入新技術與元件（CPU、GPU、DDR、Type-C、PD 等） 2. 功能實現與原型驗證 • 製作與驗證原型機（Prototype / EVT） • 分析與解決電路功能異常、訊號完整性（SI）及電源完整性（PI）問題 • 測試高速介面（USB, PCIe, HDMI, DP, Thunderbolt）與相容性驗證 • 優化功耗與散熱設計 3. 測試與驗證 • 制定並執行硬體測試計畫（功能測試、效能測試、穩定性測試） • 協助進行安規（EMI/EMC）、安規認證（UL、CE、FCC 等） • 進行系統相容性測試（各型周邊裝置、作業系統） • 與測試團隊合作分析並修正問題 4. 跨部門專案協作 • 與機構工程師（ME）協調 PCB 尺寸、元件擺放與散熱方案 • 與軟體工程師（SW）共同除錯（Debug）與韌體開發支援 • 與專案經理（PM）對齊時程與需求 • 與供應商（ODM/OEM/零件廠）討論設計、良率與成本 5. 量產支援與問題解決 • 支援試產（PVT）與量產（MP）階段的硬體異常分析 • 協助改善製造良率與穩定性 • 處理現場生產問題（SMT、組裝、測試工站） 6. 文件與版本管理 • 編寫與維護設計文件（原理圖、BOM、設計規範） • 設計變更（ECO/ECN）與版本控制 • 測試報告與問題追蹤（Issue Tracking）

1. 管理專案研發進度，管理硬體研發團隊，掌控設計品質、價格與產品開發進度 2. 協助團隊進行硬體線路設計、驗證及除錯並審查設計及驗證之相關文件 3. 能同時執行多個專案目標管理 4. 進行新技術的研究並透過新案設計達成符合市場需求之產品 5. 跨部門溝通協調，軟韌體/機構/設計測試驗證/生產製造等系統整合相關問題

Purpose of this Position 深入研究高速訊號，在高速硬體電路Signal Integrity上提供最佳設計且確保生產品質 Major Areas of Responsibility 專案研發 - Perform high speed signal integrity simulation including 10G/40G、25G/100G、PCIE、SATA、DP、USB、DDR3/DDR4/DDR5. - Perform pre-layout, layout constraint, and post-layout simulation processes. - PCB stackup design and layout review for high speed signal and PDN. - Build component models to ensure the correlation between SI/PI simulation and measurement. - Solid SI experience in resolving technical issues and performing detailed analysis. 團隊合作 - Collaborating with EE teams to refine high-speed signal performance. - Collaborate with the layout engineer to provide clear layout guidelines and enhance footprint optimization.

Responsibilities: 1.技術可行性分析 2.硬體線路設計 3.硬體設計審查和BOM產出 4.審查 PCB Layout 5.執行開機測試 和執行除錯 Work Location: ●新北市土城區自由街2號

SSD Hardware Design and Verification: Job responsibilities: SSD HW SI/PI/EMC design and verification quality assurance. 1.SSD HW circuit and PCBA board level design and assembly. 2.Component-level selection and verification. 3. Driver-level SI/PI/EMC design and verification. 4. System-level compliance verification.

1.新產品硬體開發相關作業 2.產品硬體設計驗證。 3.零件承認。 4.新產品技轉作業。 5.其他主管交辦任務。

主要負責 1. 產品線路設計 2. 產品 PCB佈局設計 3. 生產 BOM發行 4. 零件評估選用 5. 產品 bring up onsite support 6. 產品功能性驗證, 製作測試報告 7. 產品 issue 分析 debug 8. 與 SI/ME/SW/Compliance/Thermal team 合作產品設計 9. Design study and Design proposal

1.x86主機板硬體研發,線路圖繪製,Layout Review, 硬體除錯(網路應用平台及影像監控) 2.部門管理

Job responsibilities: 1. 設計連接器的測試治具或簡單小卡線路並與板廠接洽疊構。 2. 負責設計電子電路的原理圖並進行PCB佈局和佈線，確保電路符合設計要求。 3. 根據電路設計需求，選擇合適電子元件，並針對新元件和供應商進行評估。 4. 網路分析儀操作使用。

具備 1~5年 X86或GPU硬體研發經驗 1. 負責伺服器(Server)相關產品之電子電路設計與開發 2. 板階設計和完成相關周邊零件的選用和設計 3. 對於設計進行自我審查(self-review), 和完成零件廠商所提供的審查清單(review/check-list); 並針對與其他板卡橋接之介面做交叉審查(end-to-end cross review) 4. 除錯及問題排除; 並在問題解決後, 整理分析報告. 5. 執行設計訊號量測與驗證 6. 制定量測計畫和整理量測報告 7. 協助工廠將產品導入量產

職務影響力 Gogoro 電池交換站結合了電池交換、人機介面、電池充放電、資訊整合及能源管理等功能，在這些功能的底層，需要各種不同規格的電源供應電路，支持各種功能運作。身為硬體工程師，你將成為此硬體電路開發的關鍵推手，運用不斷更新的電力電子材料、零件、電源拓樸、數位控制等資源及技術，在設計開端的制定規格階段起，考量應用最佳化，兼顧性能與量產性的目標進行設計，如期、如質、如預算完成硬體相關專案開發，使能源網路性能與穩定性持續提升，在技術面創新，提供符合品牌精神的使用者體驗。 職務內容 1. 撰寫各種電源電路相關設計規格書，描述具體效能及設計細節、條件及測試規範，並考量系統面的規格影響，明確定義規格。 2. 熟悉相關類比電子電路設計和研發階段除錯，以及混合訊號規格驗證。以及對高電壓、大電流等控制元件的應用，於前端設計、模擬、可靠度有相關經驗。 3. 擔任ODM (原廠委託設計代工)、JDM (共同開發)、OEM (代工生產) 專案之技術審查及技術支援窗口，充分分析外部合作廠商的設計能力，掌握開發時程，搭配文件審核，輔以必要的廠內測試，確保合作夥伴在產品開發技術面之品質及可靠度，建立共同成長的合作關係，引導外部夥伴在產品開發上取得與公司品牌精神、營運方針間的一致性。 4. 運用電子電機專業及分析解構能力處理技術相關問題，進行解析、追蹤，並提出改善建議，優化產品功能與使用體驗。 5. 研究能源相關領域技術面趨勢，探尋可強化品牌願景與精神之新技術及知識，構思應用及評估導入至現行商業模式。 需求條件 1. 學士以上電子電機或電力電子相關領域學歷，且具備電力系統與電子元件理論及應用相關知識者佳。 2. 具備量測儀器設備基礎，如示波器、交流或直流電源供應器 (AC & DC Source)、電子負載、量測設備 (電表、資料紀錄器data recorder) 等。 3. 良好溝通技巧與協作能力，以分析性思維解決問題並提供結構性解決方案之能力。 4. 面對複雜或不明確情境，可化繁為簡，具備判斷事情優先次序的敏銳度及變革的行動力。 5. 對於工作與任務安排有彈性、可適應組織變化。 6. 具備中等的英文聽說讀寫能力。 7. 具備電源設計開發經驗、通訊介面技術如USB (通用序列匯流排 Universal Serial Bus)、CAN (控制器區域網路 Controller Area Network)、RS-485、乙太網路 (Ethernet) 等相關開發或應用技能與數位控制理論相關知識者優先安排面談。