「資深類比IC設計工程師 (NB)」的相似工作

Job description Join our innovative team specializing in cutting-edge embedded memory solutions. We are seeking Analog Circuit Engineers to play a key role in the design and development of high-performance embedded DRAM and associated peripheral circuits. In this position, you will be responsible for the complete cycle of DRAM circuit design and simulation verification. Your tasks will involve developing novel circuit topologies, transistor-level design, optimizing performance metrics, and ensuring robust functionality through extensive simulations using industry-standard EDA tools. Required qualifications include a strong technical background in Electrical Engineering, Electronics Engineering, Computer Engineering, Physics, or a closely related field. Candidates must possess demonstrated, significant experience in DRAM circuit design and comprehensive simulation verification methodologies. Ideally, candidates will have proven design experience in specific DRAM-related circuit blocks, including but not limited to: Row and Column Decoder circuits Control path logic DC-DC converters, Charge Pumps, and Bandgap References Delay Locked Loops (DLLs) and Phase Locked Loops (PLLs) Negative voltage generators (NVG) and other critical peripheral circuits This is an excellent opportunity to contribute to state-of-the-art embedded memory designs in a dynamic, collaborative environment. If you are a skilled analog designer passionate about solving complex challenges in DRAM circuitry, we encourage you to apply and help shape the future of embedded memory technology.

Job desicription: Our Design Team specializes in the challenging field of Non-Volatile Memory (NVM) IC circuit design. We are actively seeking an experienced Analog Circuit Design Engineer to contribute to our cutting-edge developments in embedded NVM solutions and surrounding circuitry. As a key member of our team, you will be responsible for the design, verification, and debugging of essential analog building blocks like Bandgap references, LDOs, and Charge Pumps. A significant part of your role will involve designing critical memory peripheral circuits for NVM IP and test chips, including Array interfaces, Decoding logic, and Sense Amplifiers. Your responsibilities will span the design lifecycle, from contributing to IP specifications and core circuit design to ensuring performance through layout optimization and comprehensive corner simulations of NVM IPs. We are looking for candidates with proven expertise in analog circuit design, ideally with prior experience in embedded memory or NVM technologies. If you are an experienced analog designer eager to tackle complex challenges in non-volatile memory, we encourage you to apply and help shape the future of memory technology.

Hands-on experience in the design and development of at least one of the following analog circuits: ADC, DAC, PGA, high-speed analog driver, PLL, or SerDes.

USB Type-C PD/E-marked IC design

1. 類比電路設計 2. 主要開發電源管理IC產品 3. DC-DC, Charger-Pump, LDO, PWM, OP相關電路設計 4. Layout 設計規劃

******以下有兩個不同的職位****** 【Analog IC Designer (DRAM IO) - 竹北】 工作內容 1. IO 設計. 2. DDR RX/TX 設計. 3. DDR 類比. 4. 擁有 DRAM IO 設計經驗，有 DDR5 以上經驗者尤佳。 擅長工具: HSPICE、Python、Laker、ADP、Custom Compiler 1. 學習過電子學、電磁學、電路學、工程數學等基本課程且成績優良。 2. Familiar with Analog Circuit Design 【 Analog IC Designer (Integration) - 竹北】 工作內容 1. Analog IP top integration, including projects of SSD/UFS/eMMC/SD 等。 2. 基本類比電路設計概念，例如 LDO、DCDC、BANDGAP、Voltage Detector 或 PLL、ADC 等。 3. 協助故障樣品分析與 IC 測試。 其他條件 1. 熟悉量產相關知識與經驗者佳。 2. 類比設計經驗超過 3 年。

*大學月薪33800元 / 碩士月薪38600元 1.申請與執行研究計畫。 2.負責報帳、經費申請、物品建檔等行政工作。 3.操作並維護計劃或實驗相關的設備與儀器。 4.協助資料收集和資料分析。 5.編輯、撰寫計畫報告書。

1.Analog front-end design 2.ADC design(Pipelined, SAR, Delta-sigma ADCs) 3.Switched-capacitor circuit design 4. Low EMI techniques 5. Mixed-signal system integration & modeling 6.負責layout floorplan規劃，與layout工程師合作完成相關驗證

1. 有USB3.1 TX/RX PHY, CDR, PLL, CTLE, DFE, FFE 的經驗 2. MIPI PHY IP 設計經驗 3. Tapeout experience on 28nm or below 4. 技術指導及專案管理 *第1、2項經驗擇一即可

1. PLL design 2. High speed receiver design (1.5Gbps/4Gbps/5.4Gbps/8.1Gbps/12Gbps) 3. High speed transmitter design (1.5Gbps/4Gbps/5.4Gbps/8.1Gbps/12Gbps) 4. eDP receiver 5. V-by-One receiver 6. MIPI D-PHY 7. HDMI Receiver 8. HDMI Transmitter 9. LCD P2P interface Transmitter 10. LDO and DCDC design 工作地點:新竹/台南

1.SERDES CMOS Circuit Design ( HDMI,DisplayPort, or USB3.0 ). 2.All Digital PLL Circuit Design.

專長為RF/類比IC電路(LDO, OP, charge Pump, DC/DC converter,PA/LNA bias design)設計及測試，具有量產經驗為佳。

We are looking for a proactive and challenge-driven engineer to join our memory design team. This role primarily focuses on gate-level simulation and functional verification to ensure product quality and alignment with specifications. 【Key Responsibilities】 1. Memory circuit design and verification. 2. Gate-level verilog simulation against to the datasheet. 3. Failure mode analysis. 【Qualifications】 1. Experience in SRAM, DRAM, or other memory product design. 2. Solid understanding of digital circuit design and Verilog HDL. 3. Experience with simulation and debugging, able to work independently. 4. Hands-on experience in failure mode analysis is a plus. 5. Deep RTL design experience is not required, but strong gate-level simulation and verification skills are essential.

1、Mixed signal IC design and verification 2、Familiar with analog circuit designs including OPAMP/PGA, Analog active filter, ADC, DAC, level shifter, CDR, charge pump, PLL, bandgap reference 3、Co-work with board-level designers to analyze power and signal integrity of PCB. 4、Transmit signal & Noise characterization and analysis 5、Experience Preferred： 3-year work experience in the following fields High-speed serdes TX/RX application Pipeline ADC / SAR ADC 6.、Master or Ph.D. degree in EE

類比電源IC設計、電路模擬、IC驗證、熟悉佈局規劃及良率提升。 熟悉下列產品的開發及設計: 1.Buck/Boost/Buck-Boost controller/converter 2.LDO/ Power Switch/ OPAMP/ 3.Switching Charger IC 4.High voltage Gate Driver for Motor 5.Low voltage Gate Driver 可依應徵者居住地決定上班地點，分為 1.新北汐止辦公室(台灣科學園區T3館) 2.新竹竹北辦公室(富翼大樓)

Analog IC design (A) Power Management(SMPS, Buck, Boost, LDO, Battery Charger)， (B) Analog Circuit Design

1. 具有類比IC設計經驗或相關科系/所畢業 2. Familiar with High-Speed Transceiver Designs, CDR/PLL, ADC/DAC, Delta-Sigma Modultors, DC-DC Converters, or Linear Regulators. 3. USB, DP, HDMI, PCIe or SATA experience is a plus.

Digital IC design engineer - Familiar with Verilog RTL coding - Familiar with digital design flow (pre-layout simulation, timing constraint, synthesis, post-layout simulation) - Will be working on high speed Serdes IPs - Experience or interest in all-digital PLLs or clock-data recovery circuits is a big plus

RF及類比IC設計與整合： (1) VCO, PLL (2) PA, LNA, Mixer

【成為円星人】 円星科技由一群專業與充滿熱情的夥伴創立於2011年，為積體電路矽智財設計服務業之新秀，秉持著『成為半導體業最值得信賴之IP公司』的願景，追求永續經營與成長。 誠摯歡迎您成為円星人，加入我們，站上國際舞台！ 一起共同打拚，以精品文化之精神，創造價值，追求卓越！ 【職務簡介】 M31主要業務為向 IC 設計業者和晶圓代工廠授權 IP，此職務為負責高速介面 IP（High Speed Interface IP）, 包含USB. PCIE, MIPI MPHY, CPHY, DPHY等SERDES IP和類比 IP（Analog IP）, 包含ADC, DAC, PLL, PVT sensor的類比IC設計工程師職缺。 【將負責的工作內容】 1. Mixed-Signal & Analog Circuits Design (LDO, OPA, Bandgap, ADC/DAC, etc) 2. High Speed Interface Analog Design (TX, RX, etc) 3. Clocking related：PLL/CDR 【條件與特質】 1. 有類比IC設計工程師相關工作經歷3年以上 2. 電機電子/資訊工程碩士畢業 如果您有以上相關經驗且對此職缺有興趣，歡迎投遞您的履歷！