「Process Engineer (HsinChu)新竹製程工程師」的相似工作

協助客戶端製程之開發、評價作業，主要之工作內容包括 1. 客戶對應 2. 設備良率的改善與提昇 3. 客戶端現場(無塵室內)製程Trouble shooting 4. 須具備外語溝通能力，與日本總公司窗口聯繫 5. 依工作需求配合支援國外長期/短期出差(如:日本) 6. 需配合加班或輪班(新裝機或專案才會需要短期輪班，常態以加班為主) 7. 公司其他據點支援 8. 遵守客戶端工安規定 9. 具半導體設備製程經驗尤佳

1.協助顧客端裝機作業、日常設備問題對應等現場作業及技術支援 2.公司內外KKM研修講師及課程開發 3.支援海外據點技術研修 4.研修管理系統開發 3-6個月新訓期間: 學習切削磨基礎知識、設備技術、協助系統維護與開發管理 履歷投遞請附上英文或是日文自傳

1. 半導體相關製程實務經驗 2. 與客戶進行研發項目的流程開發 3. 處理演示請求以促進設備銷售 4. 技術介紹的銷售支持 5. 與總部溝通以進行持續改進計劃 6. 其他公司交付任務 7. 需具備良好英文溝通能力 公司參考網頁: www.evgroup.com

The Installation Engineer job is high profile and exciting opportunity for adventurous souls! Works under minimal direction from Management. Completes documented procedures and exercises judgment within defined procedures. Recommends changes to existing process and procedures. Primary responsibility is to strive for predictable Cycle Times and Warranty Starts for new tools installed and upgraded at our customer sites. Includes activities associated with setup, alignment, calibration, troubleshooting, diagnosing, and repairing of highly sophisticated capital equipment. Represents the company to the customer and assumes accountability for customer satisfaction with all installation/upgrade-associated activities. Assures operational quality of system equipment. Works directly with KLA regions and customers to verify new tool performance and transfer tool responsibility. Seeks warranty sign-off on newly installed tools Roles and Responsibilities • Installation of new tools in the field. Follows all procedures and provides a consistent result within specified cycle times. Achieves a predictable warranty start. • Evaluates, analyzes, diagnoses and fixes technical equipment problems related to installation. Can repair issues using standard procedures or innovate to resolve system problems which can have multiple causes. • Solving problems and repairs of sophisticated system level problems are based on Installation Engineer's technical knowledge and training. Installation Engineers seek help from Staff Engineers and Management when problems occur that may exceed knowledge, education and training. • Prepares field service reports and daily passdown on Installation progress and non-conformances. Contributes to post-activity Quality Feedback Report • Hold pre-installation meetings with the customer to scope customer unique requirements then create plans of action to measure and satisfy the unique needs. Execute plans of action and validate deliverables with the customer. • Meet with customer to facilitate warranty signoff after the activity is complete. • Acquires all vital international travel documents and manages their personal lives to be ready for domestic and occasional international travel. • Handles personal finances to prevent disruption to scheduled activities - even when traveling for extended periods. • Travels domestically and internationally by commercial transportation to customer sites. • Assists other engineers as necessary. Provides mentorship and technical assistance at customer sites. Can develop basic POAs. Provides phone and on-site support for junior engineers *Note: Only applications with *English resume* will be considered. *Please also apply through KLA Career page: https://careers.kla.com/

一、【日本滋賀-CAM工程師】 ◆薪資： 月額基本給：25万円~35万円 (年收約400万円~620万円) ◆工作內容： ・使用CAD/CAM系統製作機械零件及零件加工數據 ・使用銑床和NC Router進行切削加工、設計與製作加工治具以及維護管理 ・規劃和執行多部件的組裝工作、負責加工過程中的檢查和品質監控 ・其他主管交辦事項 ◆需求條件： ・日本語N1 ・NC program、CAM的基本知識 ・具備操作MasterCAM的技能尤佳 二、【日本滋賀-品質管理&技術口譯】 ◆薪資： 月額基本給：22.6万円~ (年收約335万円~460万円) ◆工作內容： ・技術相關的日語口譯與文件翻譯 ・新產品開發與導入時的品質檢討與計畫制定 ・製造流程與檢查標準的管理 ・異常或客訴時的原因分析、對策提出與客戶應對 ・技術文件（規格書、作業標準等）的管理 ・與海外據點合作，推動供應商品質改善 ◆需求條件： ・日本語N2以上/商用英文能力 ・具備切削加工圖面的專業知識且進行日語→中文/英文技術翻譯者 三、【泰國-品質管理&技術口譯】 ◆薪資： 月額： 約THB100,000(包含住宿、各項補助在內) ◆工作內容： ・ 負責確認日本及泰國國內客戶的訂單內容（規格）、進行價格協商與交期調整。 ・ 與泰國國內供應商進行談判與協調，並執行品質管理相關業務。 ※ 根據客戶提供的圖面，與供應商協商生產規格，從試產到量產的導入、品質管理與品質保證。 ・ 推動成本降低活動與業務改善活動。 ◆需求條件： ・了解切削加工圖面 ・ 具備機電一體化領域的業務經驗 ・ 具備日文能力N2以上&商用英文能力 ・可接受外派至泰國 四、【日本大阪-供應鏈管理專員<儲備幹部>】 ◆薪資： 月額基本給:35 万円~45 万円(年収:580 万円~700 万円) ◆工作內容： ・確認客戶訂單規格、價格與交期，跟進試作至量產，多數為重複訂單。 ・與國內外供應商確認發注內容，協調價格與交期，掌握整體供應鏈流程。 ・處理各項客戶需求與問題，保持良好聯繫（拜訪、線上會議、郵件、電話）。 ◆需求條件： ・具備日文能力N2以上&商用英文能力 ・具有製造業或商社工作經驗 ・具有海外供應商管理經驗 ・能閱讀切削加工相關圖面 五、【日本大阪-海外業務<儲備幹部>】 ◆薪資： 月額基本給:29万円~40万円(年収:500 万円~630万円) ◆工作內容： ・負責功能性材料的海外銷售（既有客戶維護與新規開發 主要市場涵蓋中國、台灣、東南亞、印度等。 ・與供應商協調價格與交期，執行出口安排及物流成本管理。 ・管理銷售額與利潤，並進行績效報告。 ◆需求條件： ・具備日文能力N2以上&商用英文能力

1. To improve device yield &CIP in order to meet customer request and customer service. 2. Identify and solve process and device problems. 3. Support for customer visit and audit.

* In charge of customer account * To implement problem-solving processes in the Taiwan organization, and work with the Sales and Service organization on the improvement of product reliability at customer sites, and reduce Cost Of Ownership to our customers * Deliver technical presentation to customers, particularly on details of product design, technology, applications and safety * Regional authority for product selection * Promote new product and coordinate the local resources to manage Loan & Evaluation programmes * Resolve technical and applications issues

I. Ink process optimization and mass production monitoring : 1. Material synthesis process 2. Particle dispersion process 3. Compounding process 4. Search and summarize relevant papers and optimize proposals II. Optical data tracking of finished materials : 1. Adjust material QC item based on optical data 2. Find new / key QC indicators

【The Role】 This position involves daily on-wafer testing to support Entegris applications and R&D requests, including analyses for WEC/Litho applications. The candidate will also develop and apply advanced on-wafer testing methods, focusing on Filtration/Purification products. 【In this role you will】 • Conduct day to day operation using on-wafer tools as well as maintain up-time of the on-wafer tool. • Work closely with other metrology team members and combine organic, metal, and particle results to understand whole picture of product performance. • Ensure safety while handling some of the most hazardous chemistries such as HF, H2SO4 used in semi-industry • Deliver accurate, repeatable and reproducible on wafer testing results to global R&D and Apps team to expedite new product development cycle, improve product stability/performance, and improve productivity. • Survey new on wafer testing techniques to ensure long term competitiveness. • Hands-on management of chemical and waste inventories, including material handling, status monitoring, and ensuring compliance with safety and environmental regulations; actively contribute to continuous improvement of lab systems such as 6S and EHS. 【Traits we believe make a strong candidate】 • MS Degree of Chemistry, Chemical Engineering, Material Science. • Over 3 year working experience as an Equipment engineer, process engineer, FSE/FAE/RD engineer. • Experiences in lab/fab environment is a must. • Willing to learn 300mm wafer wet/lithography process and hardware is a must. • Experiences handling highly hazardous chemicals, such as HF, H2SO4 is highly preferred. • Proficient English conversation skill is highly preferred. • Experiences as a fab Equipment/Process engineer is highly preferred. • Experiences in wet clean tool is a plus. • Experiences in lithography track tool is a plus. • Experiences in defect inspection/review tool is a plus. • Experiences in various 300mm wafer process tool is a plus. • Knowledge in various metrology techniques is a plus. 【Your success will be measured by】 • The results delivered for day to day operations. • The results derived from project team collaboration.

You will be responsible for manage and control shopfloor related to ensure quality / delivery / cost and safety meet company standard setting and meet government requirement. Coordinating related department to let production running smoothly. You will also join operation module team activity to ensure projects continue progress. 管理並掌握生產線相關事宜並確認可滿足品質/交期/成本及安全之相關需求可合乎公司標準規範或政府相關法規規定。協調支援單位提供必要支援以利產線運行。並加入營運處相關專案，以利專案推展順利。 What you will be doing: • To lead production line meet quality / delivery and cost standard 帶領生產線產出合乎品質交期成本的產品。 • To lead production line meet company policy and government requirement 帶領生產線符合公司政策及政府法規需求 • To coordinate related department let production line running smoothly. 協調其他相關部門提供必要支援以利產線順利生產。 • To support operation teams’ activity to ensure projects continue progress. 支援營運團隊相關活動並確認相關專案可順利推展。

1.捲對捲相關設備評估。 2.新線工廠 layout規劃。 3.大世代捲對捲塗佈製程前期測試評估，實驗規劃與物料準備。 4.生產物流規劃。

Requirement: 1. Education background: chemistry major with master or above degree is preferred 2. Working background: 2 years semiconductor wet cleaning or related experiences in chemical industries is preferred 3.English: Proficient which can with Japanese guys by English 4.Chinese: Native 5.Others: Good at multi-tasking, sincere and polite personality Job Description: 1. Handle the followings with customers, suppliers and so on as RD engineer. a. RD production management Produce 10-1,000kg scale production Measure necessry measurement items Control quality based on data Manage all procurement including raw material, consumables and so on Manage resource for production and measurement Manage shipment b.Technical development Decide our production method Improve our product and raw material quality by filtration, purification and so on Install and set-up new produc tion and measurement tools Refine existing production and measurement c. Customer support Handle customer requirements as RD engineer for developed/developing products 2. Make suggestions and execute actions as continuous improvement on above. 3. Other duties may be assigned.

Our Purpose: TERADYNE, where experience meets innovation and driving excellence in every connection. We are fueled by creativity and diversity of thought and in our workforce. Our employees are supported to innovate and learn something new every day. We cultivate a culture of inclusion for all employees that respects their individual strengths, views, and experiences. We believe that our differences enable us to be a better team – one that makes better decisions, drives innovation and delivers better business results. Opportunity Overview: • Provides test solutions, test programs development and production support for customers products or IP. • Perform test correlation and data analysis, support release for production. • Provides technical support in sales presentations, product demonstrations. • Provides software/hardware development and consultation. • Develop tools to support customer test program generation and data analysis. • Provides technical expertise and value to customers. • Provide training, test solutions, test program release and troubleshooting to customers via on-site, remote or overseas travel. • Provides answers to customer inquiries concerning system software and applications. • Build application solutions based on customer requirements enhancing the product performance allowing it to become the platform of choice (design-ins). *本公司待遇優,並提供完整培訓計畫,歡迎有半導體測試開發經驗工程師加入本公司行列!

們正在尋找具備電子顯微鏡、生物影像或材料科學背景的 應用工程師，支援 Optimus 100 AI STEM 電子顯微鏡系統的台灣市場推廣與技術應用。此職位需參與銷售前技術展示、樣品製備建議、影像流程優化，以及使用者訓練等應用支援活動。 主要職責： 1.執行現場技術展示、技術講座與用戶訓練，涵蓋生醫與材料領域應用。 2.協助業務團隊進行技術簡報、提案製作與客製化解決方案建議。 3.協助用戶設計最佳的實驗流程，結合 AI STEM 影像與量化分析。 4.撰寫應用報告、技術白皮書，並協助合作單位產出聯名發表。 5.蒐集客戶回饋與應用需求，回饋給研發與產品團隊。 6.與行銷與技術部門緊密合作，開發以客戶需求為導向的技術方案。

We are seeking a customer-focused, technically adept, and relationship-driven Customer Engagement Application Engineer to join our global team supporting KLA’s industry-leading wafer inspection and metrology solutions. In this front-line, customer-facing role, you will be the trusted technical advisor and strategic partner to our customers, driving product adoption, solving complex challenges, and building long-term relationships that fuel success. You will collaborate across functions to deliver high-impact solutions in the dynamic world of semiconductor manufacturing. Key Responsibilities: • Serve as the primary technical interface between KLA and customer, building trust and credibility through consistent, high-quality support. • Deliver applications support for KLA’s wafer inspection and metrology tools at customer fabrication facilities. • Lead customer engagements including product evaluations, new tool introductions, and drive competitions. • Drive customer success by conducting acceptance tests, recipe development, hands-on training, and pre-sales technical enablement. • Cultivate strong customer relationships by understanding their technical needs, aligning solutions, and ensuring satisfaction through onsite support . • Collaborate with customers and internal teams to co-author technical papers and present at global industry symposiums. • Develop and share Best Known Methods (BKMs), SOP ( Standard Operating Procedures ) materials, and technical documentation to empower global Field Applications teams. • Act as a cross-functional bridge, aligning customer feedback with engineering, sales, and marketing to drive continuous improvement. • Analyze complex technical issues, apply statistical methods, and deliver innovative, data-driven solutions. • Report regional insights and escalate field issues to product divisions, ensuring timely resolution and product evolution. Qualifications: • Master’s degree in Physics, Optics, Engineering, Material Science, or a related field; semiconductor process knowledge is a strong plus. • Proven experience in customer-facing technical roles, with a strong track record of building and maintaining customer relationships. • Demonstrated success in technical problem-solving, project execution, and cross-functional collaboration. • Willingness to work in semiconductor cleanroom environments. • Strong project management, leadership, and organizational skills. • Excellent presentation, communication, and interpersonal abilities. • Fluent in English, with the ability to communicate clearly via email, video calls, and in-person meetings. • Ability to manage multiple priorities in a fast-paced, global environment. Key Competencies: • Strong customer orientation with a passion for delivering value and building trust. • Advanced analytical and statistical thinking for data-driven decision-making. • Effective collaboration and communication across diverse teams and cultures. • High level of initiative, ownership, and accountability in driving results. • Resilience and adaptability in dynamic, high-pressure environments. • A proactive team player with a growth mindset and a drive for excellence.

半導體設備機台安裝、維修、保養， 可接受輪班：日班/小夜/大夜 具半導體設備維修經驗者佳。 公司參考網頁: www.evgroup.com

【The Role】 Entegris is seeking a Customer Quality Engineer to implement quality assurance program to ensure quality production of products consistent with established standards. This position is located at the Entegris Taiwan. 【In this role you will】 The Customer Quality Engineer role is dynamic, technical and cross-functional. CQE's interact at multiple levels and with multiple contact points within the Customer, Entegris and Supplier organizations. This role is high impact, high output and high visibility that requires a calm-assertive demeanor and capability to manage multiple ever-changing priorities. Primary Responsibilities: • Technically respond to the customer with understanding of the supported products, including standard data analysis, driving 8D investigation and root cause strategies. • Participate in varying levels of engagement with customers and company teams on Problem Solving, Change Management, Customer’s Document reviewing, VOC for NPI process managing and Internal Audits, Project Development, Product Support and Development Programs as well as many other cross-functional tasks and projects that are aligned with Entegris and Customer goals. • Be part of a global team that is designed to improve success of Entegris with our customers. • Collaborate with cross-functional teams at varying levels and varying degrees of complexity across a vast range of products, regions and companies. (customers and suppliers). • Demonstrate excellence in planning, execution, discipline, learning, leadership, and teamwork (exemplify Entegris PACE values) • Provide support for various documentation expectations such as business process documents, item tracking, performance reporting and continuous improvement project management. 【Traits we believe make a strong candidate】 • Bachelor or above of Science Degree in Chemical, Mechanical or Electric/Electronic Engineering; or related technical field preferred. • Experience in an engineering role in the areas of quality, process, equipment or materials within the semiconductor industry. Areas of interest include PVD/ CVD, CMP, Photo, Etch, Implant, BCD and Liquid/Air/Gas Filtration & Purification. • Experience managing issues and projects between internal stakeholders and customers with experience in escalation management and project management focused on closing gaps between company and customer. • Experience with applicable quality tools such as pareto, FMEA's, SPC, histograms, trend analysis, process mapping, design of experiments, cause and effect diagrams, 8D problem solving methodology. • Ability to communicate verbally in English and Mandarin. • Flexibility to work non-standard hours and alternate work shifts to balance workload across a North America and Asia scope of responsibility. • Experience with working and communicating between North America based manufacturing facilities and Asia based support teams and customers. • Ability to travel 10% to 50% domestic and international • Advanced skills in MS Office (Outlook, Excel/ VLOOKUP, Word, Power point, and Project) • Positive attitude and passionate with a proactive nature 【Your success will be measured by】 • CQE's performance is measured by both quantitative and qualitative means that include both Customer and Entegris KPI’s that require CQE support and oversight as well as subjective interpersonal ratings from customers and internal stakeholders that are vital to the overall success of the CQE role. • Emphasis on the PACE values of People and Teamwork, Accountability, Creativity and innovation and dedication to Excellence.

1. 化合物半導體製程經驗。 2. 半導體相關製程經驗。 3. 光電元件(VCSEL、EEL、PD)模擬設計、相關製程經驗。

【The Role】 This role will work closely with sales teams, customer technology engineers in the field, R&D scientists, and manufacturing teams to develop and transfer creative and robust CMP solutions to address customers' needs. This role is in Hsinchu(Zhudong), Taiwan. 【In this role you will】 • Utilize knowledge of semiconductor CMP process to interpret the voice of the customer (VoC) and critical to quality (CTQs) for problem definition • Propose CMP product (slurry, pad, conditioner, PCMP clean etc.) and process to solve customer problems or meet new market needs • Work with multi-functional teams to develop hypotheses and lead product design space assessment based on cleanroom experiments • Plan, execute and summarize cleanroom experiments systematically designed with multi-functional teams • Analyze experiments with statistical analysis tool (JMP) and derive conclusions with confidence • Communicate key learning and conclusions to various partners clearly and timely • Develop practical methods and creative engineering solutions to accelerate customer product adoption progress • Prepare data package that defines the solution and then promote the solution both internally and to the customer • Grow expert knowledge about leading-edge Entegris technology and products. 【Traits we believe make a strong candidate】 • In-depth understanding of CMP process and impact of CMP consumables (slurry, pads, conditioning disk, etc.) on CMP performance • Proven ability to work on complex projects in a team environment and lead the development of engineering solutions • Demonstrated project management skill and knowledge of semiconductor device and integration scheme • Knowledge of Six Sigma methodology and ability to use the design of experiment (DOE) to solve engineering problems • Demonstrated data analysis skills using statistical data analysis software – JMP, Minitab • Critical and systematic thinking in developing solutions to a complex problem, upbeat and capable of contributing both as an individual and part of a highly interdependent team • Excellent written and oral communication skills • Passion for knowing “how things work” and tenacious in finding answers • Ability to rapidly switch focus and be adaptable to change • Highly motivated and committed to continuous learning • Working experience in CMP-related manufacturing or semiconductor fabrication is required. • A bachelor's degree in a technical subject area (e.g., chemistry, material science, chemical engineering, or related field) is required. An advanced degree is a plus. 【Your success will be measured by】 To be successful in this role, this role will be a results-oriented, hands-on, and committed problem solver, with the ability to communicate effectively and work multi-functionally with minimal direction.

KLA美商科磊致力於維護身心障礙者就業權益，歡迎領有身心障礙手冊或證明的夥伴投遞履歷，加入KLA！ The future is ours to create. Whether it’s a driverless car, VR experience, or factory robotics, we help turn theory into possibility. We help create technological devices and ideas that transform our future and shape our current life. We’re looking for Customer Service Engineers who contributes the support and provide unique customer value in the global electronics ecosystem. You will be able to learn the advanced mechatronic engineering and collaborate with leading customers across the globe, our expert teams of physicists, engineers, and problem-solvers design solutions that move the world forward. Roles and Responsibilities • Evaluates, analyzes, diagnoses and troubleshoots technical equipment problems via telephone or at customer site. Ensures equipment improves customer production. • Repairs of system level problems (which have multiple causes and for which no standard procedures exist) at customer sites. • Represents the company to the customer and assume accountability for customer happiness with service. • Assures operational quality of system equipment. Coordinates actions with customers to minimize down time. • Provides assistance to Installation Engineer in resolving problems. • Prepares fields service reports on customer support activity and provide documentation to other supporting functions on re-occurring problems. • Build positive relationship with customers and increase customer satisfaction by resolving sophisticated requests and issues. • Contribute to the Capturing, Re-use, Collaboration, and Improvement of knowledge using available systems • Develops and handles return materials authorization (RMA) processes for ensuring customer returns, exchanges, service and repairs are done with speed and accuracy and all client/customer service delivery issues are resolved. • Executes technical critical issues with detailed problem statement and pass-down to work with system engineering technical team in customer site. • Estimated travel is 20% once trained in the classroom as part of on-the-job training program. Although, much of the job responsibilities will be performed in the office or at the customer site supporting various projects and initiatives. In addition to problem diagnosis and resolution, other support duties will include characterization and support of customer demos and field projects. *Please visit and apply on our career website: https://kla.wd1.myworkdayjobs.com/zh-TW/Taiwan/job/Hsinchu-Taiwan/Customer-Service-Engineer-Hsinchu_2102329