「Process Engineer (HsinChu)新竹製程工程師」的相似工作

1. 半導體相關製程實務經驗 2. 與客戶進行研發項目的流程開發 3. 處理演示請求以促進設備銷售 4. 技術介紹的銷售支持 5. 與總部溝通以進行持續改進計劃 6. 其他公司交付任務 7. 需具備良好英文溝通能力 公司參考網頁: www.evgroup.com

協助客戶端製程之開發、評價作業，主要之工作內容包括 1. 客戶對應 2. 設備良率的改善與提昇 3. 客戶端現場(無塵室內)製程Trouble shooting 4. 須具備外語溝通能力，與日本總公司窗口聯繫 5. 依工作需求配合支援國外長期/短期出差(如:日本) 6. 需配合加班或輪班(新裝機或專案才會需要短期輪班，常態以加班為主) 7. 公司其他據點支援 8. 遵守客戶端工安規定 9. 具半導體設備製程經驗尤佳

The Installation Engineer job is high profile and exciting opportunity for adventurous souls! Works under minimal direction from Management. Completes documented procedures and exercises judgment within defined procedures. Recommends changes to existing process and procedures. Primary responsibility is to strive for predictable Cycle Times and Warranty Starts for new tools installed and upgraded at our customer sites. Includes activities associated with setup, alignment, calibration, troubleshooting, diagnosing, and repairing of highly sophisticated capital equipment. Represents the company to the customer and assumes accountability for customer satisfaction with all installation/upgrade-associated activities. Assures operational quality of system equipment. Works directly with KLA regions and customers to verify new tool performance and transfer tool responsibility. Seeks warranty sign-off on newly installed tools Roles and Responsibilities • Installation of new tools in the field. Follows all procedures and provides a consistent result within specified cycle times. Achieves a predictable warranty start. • Evaluates, analyzes, diagnoses and fixes technical equipment problems related to installation. Can repair issues using standard procedures or innovate to resolve system problems which can have multiple causes. • Solving problems and repairs of sophisticated system level problems are based on Installation Engineer's technical knowledge and training. Installation Engineers seek help from Staff Engineers and Management when problems occur that may exceed knowledge, education and training. • Prepares field service reports and daily passdown on Installation progress and non-conformances. Contributes to post-activity Quality Feedback Report • Hold pre-installation meetings with the customer to scope customer unique requirements then create plans of action to measure and satisfy the unique needs. Execute plans of action and validate deliverables with the customer. • Meet with customer to facilitate warranty signoff after the activity is complete. • Acquires all vital international travel documents and manages their personal lives to be ready for domestic and occasional international travel. • Handles personal finances to prevent disruption to scheduled activities - even when traveling for extended periods. • Travels domestically and internationally by commercial transportation to customer sites. • Assists other engineers as necessary. Provides mentorship and technical assistance at customer sites. Can develop basic POAs. Provides phone and on-site support for junior engineers *Note: Only applications with *English resume* will be considered. *Please also apply through KLA Career page: https://careers.kla.com/

* In charge of customer account * To implement problem-solving processes in the Taiwan organization, and work with the Sales and Service organization on the improvement of product reliability at customer sites, and reduce Cost Of Ownership to our customers * Deliver technical presentation to customers, particularly on details of product design, technology, applications and safety * Regional authority for product selection * Promote new product and coordinate the local resources to manage Loan & Evaluation programmes * Resolve technical and applications issues

1. To improve device yield &CIP in order to meet customer request and customer service. 2. Identify and solve process and device problems. 3. Support for customer visit and audit.

* 良率異常分析與處理。 * CP / FT / SLT 數據追蹤，擬定調整製程參數或條件。 * 跨部門溝通協調處理量產問題執行 & 製程監控。 * 晶圓製程開發、改善製程 & 元件優化、產品良率管理 & 改善 & 降低成本。 1. Co-work w/ functional engineering team member (TME/DE/TD/TE/RE) to make new product has good definition, Risk evaluation and Build comprehensive testing plan / Qual plan, etc. 2. Co-work w/ other Engineering team member to ensure all new product can be thoroughly Manufactured, Characterized and Qualified for reliabilities and qualities. 3. Organize assignments and independently schedules to complete assigned tasks timely and make project finished efficiently. 4. Have good Coordination and Data Analysis to solve difficult problems through application of various techniques and approaches to develop effective and practical solutions that result in improved products, processes with good quality. 6. Annual salary: 800K NTD and above 7. Onsite MediaTek - Hsinchu Science Park Office This position is set for PE (Product Engineer) to coordinate new product development activities, ensure timely completion of all new products manufacturing, testing, characterization, qualification and releasing with good consistency, quality and efficiency.

I. Ink process optimization and mass production monitoring : 1. Material synthesis process 2. Particle dispersion process 3. Compounding process 4. Search and summarize relevant papers and optimize proposals II. Optical data tracking of finished materials : 1. Adjust material QC item based on optical data 2. Find new / key QC indicators

Requirement: 1. Education background: chemistry major with master or above degree is preferred 2. Working background: 2 years semiconductor wet cleaning or related experiences in chemical industries is preferred 3.English: Proficient which can with Japanese guys by English 4.Chinese: Native 5.Others: Good at multi-tasking, sincere and polite personality Job Description: 1. Handle the followings with customers, suppliers and so on as RD engineer. a. RD production management Produce 10-1,000kg scale production Measure necessry measurement items Control quality based on data Manage all procurement including raw material, consumables and so on Manage resource for production and measurement Manage shipment b.Technical development Decide our production method Improve our product and raw material quality by filtration, purification and so on Install and set-up new produc tion and measurement tools Refine existing production and measurement c. Customer support Handle customer requirements as RD engineer for developed/developing products 2. Make suggestions and execute actions as continuous improvement on above. 3. Other duties may be assigned.

1.協助顧客端裝機作業、日常設備問題對應等現場作業及技術支援 2.公司內外KKM研修講師及課程開發 3.支援海外據點技術研修 4.研修管理系統開發 3-6個月新訓期間: 學習切削磨基礎知識、設備技術、協助系統維護與開發管理 履歷投遞請附上英文或是日文自傳

1. 化合物半導體製程經驗。 2. 半導體相關製程經驗。 3. 光電元件(VCSEL、EEL、PD)模擬設計、相關製程經驗。

1. 流利的英文能力 2. 專業維修技術背景 3. 設備及半導體經驗 4. 積極主動，能夠獨立工作 5. 重視團隊紀律 公司參考網頁: www.evgroup.com

半導體設備機台安裝、維修、保養， 可接受輪班：日班/小夜/大夜 具半導體設備維修經驗者佳。 公司參考網頁: www.evgroup.com

【The Role】 This position involves daily on-wafer testing to support Entegris applications and R&D requests, including analyses for WEC/Litho applications. The candidate will also develop and apply advanced on-wafer testing methods, focusing on Filtration/Purification products. 【In this role you will】 • Conduct day to day operation using on-wafer tools as well as maintain up-time of the on-wafer tool. • Work closely with other metrology team members and combine organic, metal, and particle results to understand whole picture of product performance. • Ensure safety while handling some of the most hazardous chemistries such as HF, H2SO4 used in semi-industry • Deliver accurate, repeatable and reproducible on wafer testing results to global R&D and Apps team to expedite new product development cycle, improve product stability/performance, and improve productivity. • Survey new on wafer testing techniques to ensure long term competitiveness. • Hands-on management of chemical and waste inventories, including material handling, status monitoring, and ensuring compliance with safety and environmental regulations; actively contribute to continuous improvement of lab systems such as 6S and EHS. 【Traits we believe make a strong candidate】 • MS Degree of Chemistry, Chemical Engineering, Material Science. • Over 3 year working experience as an Equipment engineer, process engineer, FSE/FAE/RD engineer. • Experiences in lab/fab environment is a must. • Willing to learn 300mm wafer wet/lithography process and hardware is a must. • Experiences handling highly hazardous chemicals, such as HF, H2SO4 is highly preferred. • Proficient English conversation skill is highly preferred. • Experiences as a fab Equipment/Process engineer is highly preferred. • Experiences in wet clean tool is a plus. • Experiences in lithography track tool is a plus. • Experiences in defect inspection/review tool is a plus. • Experiences in various 300mm wafer process tool is a plus. • Knowledge in various metrology techniques is a plus. 【Your success will be measured by】 • The results delivered for day to day operations. • The results derived from project team collaboration.

You will be responsible for manage and control shopfloor related to ensure quality / delivery / cost and safety meet company standard setting and meet government requirement. Coordinating related department to let production running smoothly. You will also join operation module team activity to ensure projects continue progress. 管理並掌握生產線相關事宜並確認可滿足品質/交期/成本及安全之相關需求可合乎公司標準規範或政府相關法規規定。協調支援單位提供必要支援以利產線運行。並加入營運處相關專案，以利專案推展順利。 What you will be doing: • To lead production line meet quality / delivery and cost standard 帶領生產線產出合乎品質交期成本的產品。 • To lead production line meet company policy and government requirement 帶領生產線符合公司政策及政府法規需求 • To coordinate related department let production line running smoothly. 協調其他相關部門提供必要支援以利產線順利生產。 • To support operation teams’ activity to ensure projects continue progress. 支援營運團隊相關活動並確認相關專案可順利推展。

Our Purpose: TERADYNE, where experience meets innovation and driving excellence in every connection. We are fueled by creativity and diversity of thought and in our workforce. Our employees are supported to innovate and learn something new every day. We cultivate a culture of inclusion for all employees that respects their individual strengths, views, and experiences. We believe that our differences enable us to be a better team – one that makes better decisions, drives innovation and delivers better business results. Opportunity Overview: • Provides test solutions, test programs development and production support for customers products or IP. • Perform test correlation and data analysis, support release for production. • Provides technical support in sales presentations, product demonstrations. • Provides software/hardware development and consultation. • Develop tools to support customer test program generation and data analysis. • Provides technical expertise and value to customers. • Provide training, test solutions, test program release and troubleshooting to customers via on-site, remote or overseas travel. • Provides answers to customer inquiries concerning system software and applications. • Build application solutions based on customer requirements enhancing the product performance allowing it to become the platform of choice (design-ins). *本公司待遇優,並提供完整培訓計畫,歡迎有半導體測試開發經驗工程師加入本公司行列!

【The Role】 The Sr. Application Engineer will provide technical solutions in Liquid Filtration/Purification applications through product testing in laboratory and co-working with customer for developing product evaluation and existing problem solving, major focus on the aggressive product. 【In this role you will】 • Develop deep understanding of Entegris technology to recommend customer solutions for filtration/purification. • Visit customer to press ahead on the new product evaluation and feedback customer need to Entegris product developing team to be well-aligned with the progress and strategy. • Plan and execute experiments for new product development and customer-requested design • Develop test methods to demonstrate filter performance in laboratory • Publish work with internal facing applications notes, technical conferences, & journals • Mentor /coach junior engineering team members across teams. 【Traits we believe make a strong candidate】 • Excellent problem solving and design capabilities (Master’s degree preferred) • Detail orientated, able to record/analyze quantitative data and make qualitative observations where required • Strong fab (IDM, OEM) experience in Wet Etch and Clean process/equipment area. • Chemical Engineering / Materials Science / Chemistry experience is preferred (>5 years’ experience; MS, PhD degrees preferred) • Experience with customer oriented technical support with OEM FAB is a plus. • Fluent in English 【Your success will be measured by】 • Demonstrating teamwork. • Actively seeking solutions to problems. • Learning quickly from mistakes. • Cooperate with different team among metrology/Product Development Engineers/Product Managers/Sales on customer issues. • Understanding departmental and group goals and dedicating work to achieve.

We are seeking a customer-focused, technically adept, and relationship-driven Customer Engagement Application Engineer to join our global team supporting KLA’s industry-leading wafer inspection and metrology solutions. In this front-line, customer-facing role, you will be the trusted technical advisor and strategic partner to our customers, driving product adoption, solving complex challenges, and building long-term relationships that fuel success. You will collaborate across functions to deliver high-impact solutions in the dynamic world of semiconductor manufacturing. Key Responsibilities: • Serve as the primary technical interface between KLA and customer, building trust and credibility through consistent, high-quality support. • Deliver applications support for KLA’s wafer inspection and metrology tools at customer fabrication facilities. • Lead customer engagements including product evaluations, new tool introductions, and drive competitions. • Drive customer success by conducting acceptance tests, recipe development, hands-on training, and pre-sales technical enablement. • Cultivate strong customer relationships by understanding their technical needs, aligning solutions, and ensuring satisfaction through onsite support . • Collaborate with customers and internal teams to co-author technical papers and present at global industry symposiums. • Develop and share Best Known Methods (BKMs), SOP ( Standard Operating Procedures ) materials, and technical documentation to empower global Field Applications teams. • Act as a cross-functional bridge, aligning customer feedback with engineering, sales, and marketing to drive continuous improvement. • Analyze complex technical issues, apply statistical methods, and deliver innovative, data-driven solutions. • Report regional insights and escalate field issues to product divisions, ensuring timely resolution and product evolution. Qualifications: • Master’s degree in Physics, Optics, Engineering, Material Science, or a related field; semiconductor process knowledge is a strong plus. • Proven experience in customer-facing technical roles, with a strong track record of building and maintaining customer relationships. • Demonstrated success in technical problem-solving, project execution, and cross-functional collaboration. • Willingness to work in semiconductor cleanroom environments. • Strong project management, leadership, and organizational skills. • Excellent presentation, communication, and interpersonal abilities. • Fluent in English, with the ability to communicate clearly via email, video calls, and in-person meetings. • Ability to manage multiple priorities in a fast-paced, global environment. Key Competencies: • Strong customer orientation with a passion for delivering value and building trust. • Advanced analytical and statistical thinking for data-driven decision-making. • Effective collaboration and communication across diverse teams and cultures. • High level of initiative, ownership, and accountability in driving results. • Resilience and adaptability in dynamic, high-pressure environments. • A proactive team player with a growth mindset and a drive for excellence.

1. 集團材料技術管理 2. 集團材料工程應用與精進專案 3. 材料與塗佈製程效益提升 4. 新材料開發與驗證

Job Responsibilities • Conducts technical training courses for customers and/or employees in the use of complex situations for multiple products. • Interacts with customer and functional organizations to develop specifications for content of courses. • Prepares lesson plans from engineering documentation, field service requirements or software documentation. • Works with engineering, technical support and manufacturing to ensure that course material reflects current product features. • Instructs participants in both classroom lectures and laboratory sessions. • Follows up to determine applicability of course material.

KLA美商科磊致力於維護身心障礙者就業權益，歡迎領有身心障礙手冊或證明的夥伴投遞履歷，加入KLA！ The future is ours to create. Whether it’s a driverless car, VR experience, or factory robotics, we help turn theory into possibility. We help create technological devices and ideas that transform our future and shape our current life. We’re looking for Customer Service Engineers who contributes the support and provide unique customer value in the global electronics ecosystem. You will be able to learn the advanced mechatronic engineering and collaborate with leading customers across the globe, our expert teams of physicists, engineers, and problem-solvers design solutions that move the world forward. Roles and Responsibilities • Evaluates, analyzes, diagnoses and troubleshoots technical equipment problems via telephone or at customer site. Ensures equipment improves customer production. • Repairs of system level problems (which have multiple causes and for which no standard procedures exist) at customer sites. • Represents the company to the customer and assume accountability for customer happiness with service. • Assures operational quality of system equipment. Coordinates actions with customers to minimize down time. • Provides assistance to Installation Engineer in resolving problems. • Prepares fields service reports on customer support activity and provide documentation to other supporting functions on re-occurring problems. • Build positive relationship with customers and increase customer satisfaction by resolving sophisticated requests and issues. • Contribute to the Capturing, Re-use, Collaboration, and Improvement of knowledge using available systems • Develops and handles return materials authorization (RMA) processes for ensuring customer returns, exchanges, service and repairs are done with speed and accuracy and all client/customer service delivery issues are resolved. • Executes technical critical issues with detailed problem statement and pass-down to work with system engineering technical team in customer site. • Estimated travel is 20% once trained in the classroom as part of on-the-job training program. Although, much of the job responsibilities will be performed in the office or at the customer site supporting various projects and initiatives. In addition to problem diagnosis and resolution, other support duties will include characterization and support of customer demos and field projects. *Please visit and apply on our career website: https://kla.wd1.myworkdayjobs.com/zh-TW/Taiwan/job/Hsinchu-Taiwan/Customer-Service-Engineer-Hsinchu_2102329