Exyte Taiwan Co., Ltd._易科德室內裝修工程股份有限公司

【此職缺為育嬰留停職代之定期契約人員】 職務說明 • 負責公司AP/Treasury業務。 • SAP Keyin 經驗尤佳。 • 主管交辦事項。 工作技能 • 會計或審計專業知識 • 會計核算和帳務處理

【此職缺為育嬰留停職代之定期契約人員】 職務說明 • 負責公司AP/Treasury業務。 • SAP Keyin 經驗尤佳。 • 主管交辦事項。 工作技能 • 會計或審計專業知識 • 會計核算和帳務處理

• Define and review validation, qualification and GMP complains related regulations, code and standards (TFDA and international GMP shall be considered) • Develop and update project validation master plan. • Review and update project GMP risk assessment. • Lead the qualification team to develop qualification plan for process, clean room / HVAC, critical utilities, EMS, any associated system. • Coordinate with design team for DQ review and design GMP upgrade. • Drive the qualification team to develop, review and update GMP risk assessment, system impact assessment for the project. • Drive the project qualification team to develop / review URS, DQ, IQ, OP, PQ protocol for process, clean room / HVAC and critical utilities system. • Lead the project qualification team, vendor and client operation team to execute DQ, IQ, OQ and PQ for clean room / HVAC, EMS critical utilities system. • Lead project qualification team, vendor and client process team to execute DQ, IQ, OQ and support PQ execution for process system. • Filing & organization of all the associated documentation by following the project specific document control procedure / requirement. • Provide qualification summary and validation summary report. • When applicable, conduct or join the needed meeting in order to facilitate validation and associated interfaces. • Coordinate with internal and external stakeholders in terms of validation and associated interfaces. Stakeholders include but not limited to the Client, internal project team, vendors / subcontractors, consultant, authority etc. • Other tasks assigned by department manager.

1. Chilled - / Warm Water 冰水/熱水 設計 2. Sanitary and Plumbing / Drainage 排水 設計 3. Process Cooling Water 製程冷卻水設計 4. Vacuum Systems (Low-/High Vacuum) 高低真空設計 • Review & comprehend design and construction drawings • Lead the design and construction of Mechanical/Piping system equipment. • Responsible for preparation & approval of project specific specifications, datasheets, Calculations etc.. • Oversee on-site mechanical and piping system installation, ensuring performance, schedule, budget, safety, and commissioning. • Evaluate technical bid document and prepare recommendation report for purchase of major mechanical and piping equipment. • Preference for candidates with experience in chiller and process cooling water systems design

1. Chilled - / Warm Water 冰水/熱水 設計 2. Sanitary and Plumbing / Drainage 排水 設計 3. Process Cooling Water 製程冷卻水設計 4. Vacuum Systems (Low-/High Vacuum) 高低真空設計 - Responsible for preparation & approval of project specific specifications, datasheets, Calculations etc. - Responsible for the approval of method statements, sub-contractors submittals, shop drawings; coordinate internally with other disciplines for interface requirements. - Interact and communicate with own department, other departments, project team members, clients and other external parties to ensure co-ordination of activities. - Plan and deliver multiple tasks in a timely fashion to meet project schedules; provide site support for construction, installation, commissioning, modification. 中英文履歷皆可

製程排氣系統、空調系統、消防排煙系統 1. 空調系統設計,製程排氣系統設計,消防排煙系統設計,通風系統設計,空調熱負荷計算 2. 空調風管設計,製程排氣風管設計,消防排煙風管設計 3. 成本估算協助,系統分析

Engineering design of Instrument and Control System  FMCS/SCADA System  DCS / PLC / DDC  Instrumentation Developing and Implementations System, Specification, Drawings, BOQ, etc.  System Diagram -Networking - Specification  P & ID(ISA)  I/O List  Instrument List  Instrument Layout  Control Logic and Wiring Diagram  Hook-up Details  Others(IT/Telecomm Site Operation / Start-up Commissioning, etc. 製程控制系統、控制迴路圖等規劃設計，儀控設備及儀器規範制定。 * please provide English CV/ 請同時提供英文履歷。

Senior Process Engineer (Utility systems) 【Job Responsibilities】 • Engineering planning and design reviewing of design data from client. • Produces engineering documents by developing construction specifications, plans, and schedules. • Determines project costs by calculating labor, material, and related costs. • Provide technical direction or supervision to junior engineers, engineering or computer-aided design (CAD) technicians, or other technical personnel. • Design or select equipment for use in process utility system to ensure compliance with local regulations and standards. • Evaluate current processes and develop improvements to safety, quality, and efficiency. • Create standards and specifications for processes and facilities. • Assist in the establishment of timelines and budgets. 【Process Utilities Engineer Qualifications/Skills】 • Prefer to have in-depth technical knowledge in any of the process utility systems, i.e., gas (bulk and specialty gases) , chemical systems, WFI (Water for injection), PW (Pure Water), UPW (Ultrapure Waste), DIW (Deionized Water Systems) or wastewater. • Experience working with process utility systems for petrochemical, pharmaceutical, biochemical or semiconductor industries. • Demonstrated ability to solve highly technical problems. • Strong technical writing ability. • Ability to execute tasks with minimal oversight. • Excellent presentation and verbal communication skills. 【Education and Experience Requirements:】 • Bachelor’s degree or above in chemical engineering or a related field. • Project management experience a plus. 中英文履歷皆可

Engineering design of Instrument and Control System  FMCS/SCADA System  DCS / PLC / DDC  Instrumentation Developing and Implementations System, Specification, Drawings, BOQ, etc.  System Diagram -Networking - Specification  P & ID(ISA)  I/O List  Instrument List  Instrument Layout  Control Logic and Wiring Diagram  Hook-up Details  Others(IT/Telecomm Site Operation / Start-up Commissioning, etc. 製程控制系統、控制迴路圖等規劃設計，儀控設備及儀器規範制定。 * please provide English CV/ 請同時提供英文履歷。

• Work with the senior engineer/ manager to develop design documentation. • Design of Electrical Power Distribution, Lighting, Grounding, Signaling, Communication, Security/Life safety and Instrumentation. • Perform detailed calculations such as cable sizing, voltage drop, breaker selection/setting, co-ordination studies and containment sizing. • Updating the electrical database (Amtech/EasyPower). • Drafting 2D schematic and equipment plan drawings. • Adherence to project schedule. • Review of design guides and specification. • Co-coordinating with sub-contractor resolve RFIs and answering submittals. • Other duties as required and as directed by the senior engineer or managers. Design Engineering and Construction Project Management and Execution experience, if any

Process Engineer (Utility systems) 【Job Responsibilities】 • Engineering planning and design reviewing of design data from client. • Produces engineering documents by developing construction specifications, plans, and schedules. • Determines project costs by calculating labor, material, and related costs. • Provide technical direction or supervision to junior engineers, engineering or computer-aided design (CAD) technicians, or other technical personnel. • Design or select equipment for use in process utility system to ensure compliance with local regulations and standards. • Evaluate current processes and develop improvements to safety, quality, and efficiency. • Create standards and specifications for processes and facilities. • Assist in the establishment of timelines and budgets. 【Process Utilities Engineer Qualifications/Skills】 • Prefer to have in-depth technical knowledge in any of the process utility systems, i.e., gas (bulk and specialty gases) , chemical systems, WFI (Water for injection), PW (Pure Water), UPW (Ultrapure Waste), DIW (Deionized Water Systems) or wastewater. • Experience working with process utility systems for petrochemical, pharmaceutical, biochemical or semiconductor industries. • Demonstrated ability to solve highly technical problems. • Strong technical writing ability. • Ability to execute tasks with minimal oversight. • Excellent presentation and verbal communication skills. 【Education and Experience Requirements:】 • Bachelor’s degree or above in chemical engineering or a related field. • Project management experience a plus. 中英文履歷皆可

• 於專案執行期間直接向專案品管負責人 / 專案經理報告。 • 根據自身專業擬定相關品質管理計畫。 • 根據擬定之檢驗測試計畫(品質管理標準)，執行專案必要的品管活動，包含協調相關單位，以確保專案品管活動能夠如期、安全的進行，滿足業主及專案的需求。 • 於執行品管活動期間，如發現缺陷、不合格狀態，依照相關流程開立缺失單或不合格報告書等，並加以管理。 • 確保品質計畫、紀錄、報告之文件品質及移交時程滿足專案要求。 • 參加移交巡檢，並記錄品質缺陷，發布並追蹤結果。 • 必要時，參與廠驗，包含品質保證系統驗證，及重大設備品質確認等。 • 參加與業主及與包商之例行會議，進行品管工作報告。 • (若適用)，針對關鍵廠商、工項進行稽核。 • (若適用)，準備及應對內外部品管稽核。 • 支援部門其他與品質管理相關事宜。 * 孰悉儀電類施工安裝(如低壓電力、中高壓電力、弱電)及相關品質管理規範。 * 具備ATF 高科技廠辦擴廠工程施工經驗，參與儀電類施工或具備相關知識，如有無塵室相關工作經驗尤佳。 * 具備品質管理規劃概念、執行經驗 * 具備公共工程品質管理人員證照

Responsibilities:工作職掌 • Must be fully conversant with Construction Site Safety Requirements. 熟悉工程現場各項安全規定事項與要求 • Strategically plan and manage logistics, transportation and customer services 統籌規劃各項物料進場、運輸規劃與調度以及與客戶之間的協調 • Participate Client Logistic meeting daily/weekly on project demand 根據案子的需求，參與客戶端的每日/每周運輸動線協調會議 • Liaise and negotiate with suppliers contractors and suppliers 協助供應商和承包商之間的聯繫與協調 • Create and manage logistics with EXYTE contractors and suppliers to coordinate deliveries 統籌管理與規劃易科德承包商和供應商的物料運送 • Coordinate with EXYTE oversea logistic department 與易科德海外物流部門聯絡溝通與合作 • Maintain minutes of meeting and record all deliveries by date/area/floor level 相關會議記錄以及各項運輸資訊的紀錄 • Keep track of delivery dates, road usage, loading platform usage and elevator scheduling 追蹤與安排各項運送日期 路線、所需的吊裝平台和升降梯的時程 • Maintain and weekly update Move In plan and track record 每周定期更新材料設備入場計畫與追蹤各項後續事宜 • Resolve any arising problems or complaints on site (in the field) 協調、解決現場所產生的糾紛與抱怨

• Conducting site supervision of installation inspections / checks, testing and commissioning works at site, monitoring and surveillance of compliance to quality standards, specifications. Managing issuing NCRs for deficiencies/noncompliance, identifying snags and management / monitoring of snags closure. • Developing Testing and Commissioning Plans, procedures, schedules, Method Statements for each systems & equipments as required. • Participating in process of Inspection and Test Plans (ITPs) of each systems & equipments, O&Ms, As Built documentation etc • Managing Site acceptance testing (SAT) witness and certification process for all equipment and systems. Reviewing functional test data for evidencing compliance with performance specifications and other standards. Reporting on testing and inspection results and coordinating for Engineer/ consultant’s sign off /certification of the relevant systems/sub systems as applicable. • Coordinating with Construction manager, Project Manager and contractors for Inspection of respective systems/subsystem’s and documentations of functional testing record sheet for disciplines. • Coordinating with contractors for schedule of vendor attendance at site for critical equipment, complex system packages and monitoring the vendor presence as per schedule to be prepared and agreed during project execution. • Reviewing and monitoring availability of required consumables spares for the pre commissioning testing, commissioning and operation etc. • Participating /conducting Safety reviews, safety hazard identification and mitigation planning with Contractors. • Coordinating with contractors to ensure that site acceptance tests (SAT) and inspection of works are carried out as stated in the performance specifications, ITPs • Following up & coordinating with consultants for all 3rd party inspection review of testing & certification as applicable. • Managing and coordinating preparation of system for punch listing activities, reviewing and following up with Contractors/ consultants for the close out of punch list items, through time bound corrective action/review. Expediting/following up with the respective engineers involved in the completion of individual system punch lists . • Managing the Lockout & Tag out activities as per approved procedure. • Attending regular construction/commissioning meetings on follow up for Pre commissioning/ commissioning activities, reviewing and following up areas of concern in the contractors preparedness/resources with regard to commissioning schedules . • Preparing regular inputs for progress and forecast reports on relevant construction completion, pre-commissioning & commissioning, start up, etc. to project management. • Location: Mainly around North of Taiwan.(Taoyuan, Hsinchu) Language: both Chinese and English skills. Please provide English and Chinese CV. 此職缺為專案約聘職

Job Summary The Construction Manager is responsible for the coordination and execution of regular maintenance work. Responsible for ensuring site safety is maintained according to the safety plan, maintaining the daily progress goals, ensuring installation quality is monitored during the entire service period, and communicating to Project Managers. The Construction Manager must be ready to take on unique challenges daily, with the responsibility of keeping a project on schedule and on budget. Acts as the Company's representative when dealing with vendors, subcontractors, local authorities, and other stakeholders. Essential Duties and Responsibilities •Responsible for communicating and upholding safety culture and safety policies and procedures throughout the project •Works with Procurement in scope of work development and the solicitation and pre-qualification of Subcontractors and Suppliers. Responsible for all technical evaluations of bid proposals and overall scope ownership •Prepares and manages construction schedule and daily planning of work •Be intimately familiar with Subcontractor scope of work, Subcontract agreements, and design drawings, for the ownership of construction execution on time and within budget •Responsible for subcontract pay applications reviews and approvals •Coordinates with Quality Control and Document Control to ensure the timely review and processing of, shop drawings and required submittals in a timely manner •Coordinates submittals and RFI's with responsible design professionals •Coordinates, communicates, and documents changes in scope of work. Responsible for capturing and communicating any schedule, quality, or cost associated with changes •Coordinates with the Superintendents and Quality Control all required testing and documentation is planned and completed correctly •Ensures Quality is upheld daily and punch lists are generated and completed in a timely manner •Assists in preparation of all project status reports •Other duties as assigned

-Discover your exciting roles An Expert EHS ensures compliance with environmental, health, and safety regulations across construction projects. They lead risk assessments, incident investigations, and implement proactive safety measures. They collaborate with cross-functional teams to promote a strong safety culture and sustainable practices. -Explore your tasks and responsibilities Develop, implement, and maintain EHS policies and procedures in compliance with local regulations and corporate standards. Conduct risk assessments and job hazard analyses to identify potential safety and environmental risks on construction sites. Lead incident investigations and root cause analyses, and implement corrective and preventive actions. Monitor site activities to ensure compliance with safety protocols and environmental regulations. Provide EHS training and awareness programs for employees, contractors, and subcontractors. Collaborate with project managers, engineers, and site supervisors to integrate EHS considerations into project planning and execution. Prepare and submit EHS reports, metrics, and documentation to internal and external stakeholders. Stay updated on changes in EHS laws, regulations, and best practices relevant to the construction industry. -Show your expertises Bachelor's degree in Environmental Science, Occupational Health and Safety, Engineering, or a related field. Experience in Data center is the must. Experience in high-tech factory, cleanroom engineering, or construction industry is a plus. Language: Chinese (native level) , English (professional level). Certification: One of these three Certification is required. Occupational Safety and Hygiene Specialist Class B or Occupational Safety and Hygiene Supervisor Level A for construction or Occupational Safety and Hygiene Supervisor Level A for general. Minimum 10 years of EHS experience in the construction or heavy industry sector. Basic computer skills (Excel, Outlook, PowerPoint, Word) are required. Strong knowledge of local and international EHS regulations (e.g., OSHA, ISO 45001, ISO 14001).

1. 專案現場工安巡檢管理 2. 職業安全衛生相關事宜 3. 高科技廠房、無塵室工程或營造業經驗 *營造業甲種業務主管、乙級職業安全衛生管理員、甲級職業衛生管理師、甲級職業安全管理師，持其一證照即可 *工作地點視求職者條件，可能配置到桃園龍潭、桃園龜山、新竹竹科、新竹寶山。

Role Purpose: The Specialist Procurement is supports in dedicated work packages from tendering to contract award and will work with interdisciplinary interfaces and stakeholders such as Engineering, Project and Commercial Management, Scheduling, Legal and Construction Management. Responsibilities 1. Supports in managing the existing supplier base, identifying new suppliers, and conducting the prequalification process to ensure suppliers meet Exyte's sourcing standards 2. Supports in the RFP process, including compiling requirements documentation, internal reconciliation to ensure a common understanding of the scope, submission to the selected supplier panel, closely monitoring and guidance to suppliers for timely and high-quality returns 3. Supports in the preparation of an initial commercial bid evaluation and collaboration with relevant internal stakeholders to gain an understanding of overall RFP compliance and supplier competitiveness and jointly create a shortlist 4. Supports in the contract clarification and negotiation process in accordance with the project plan, involving suppliers and internal and external stakeholders 5. Supports in the preparation of the final commercial tender evaluation, coordination with the relevant internal stakeholders and presentation of the award recommendation in order to obtain the approval of internal and external stakeholders 6. Preparation of purchase orders and ensuring the transfer of procurement knowledge and information to the procurement and subcontracting team after the contract is awarded 7. Building relationships with suppliers and leveraging experience within projects and within the procurement and procurement organization 8. Regularly communicate on issues such as project progress and work closely with the Project Procurement Manager to ensure complete transparency of all procurement-related matters Others: 1. Can accept short-term business trip is preferred. 職務描述: 負責從招標到合約簽訂的特定工作項目，並將與跨部門的介面與利害關係人合作，例如工程部、專案與商務管理、排程、法務及施工管理等。 工作職責： 1.協助管理現有供應商名單、尋找新供應商，並執行資格預審流程，以確保供應商符合 Exyte 的採購標準。 2.協助執行 RFP（提案邀請）流程，包括彙整需求文件、內部對齊以確保對範疇有共同理解、提交給選定的供應商名單，並密切監控供應商回覆的時效與品質。 3.協助初步商務報價評估，並與相關內部利害關係人合作，以了解整體 RFP 的符合性與供應商競爭力，並共同建立候選名單。 4.根據專案計畫，協助合約澄清與談判流程，並與供應商及內外部利害關係人合作。 5.協助準備最終商務投標評估，與相關內部利害關係人協調，並提出授標建議，以取得內外部利害關係人的核准。 6.準備採購訂單，並在合約簽訂後，確保採購知識與資訊順利移轉至採購與分包團隊。 7.建立與供應商的合作關係，並在專案及採購組織中善用既有經驗。 8.定期溝通專案進度等相關議題，並與專案採購經理密切合作，以確保所有採購相關事宜的透明度。 其他: 能接受短期出差者佳。

Role Purpose: The Document Controller ensures that all project documentation is properly managed, controlled, and accessible throughout the project lifecycle. This role safeguards compliance with company standards, client requirements, and ISO procedures. As a key member of the Exyte Document Control team, your role will include: • Supporting the project team by efficiently transmitting and recording all project documents, while closely collaborating with internal and external stakeholders. • Establishing and upholding high standards of document control principles. • Implementing, maintaining, and optimizing the Document Management System within the project. • Delivering document control training across the project team. Additional responsibilities • Audit Support: Assist in preparing, organizing, and providing documentation during internal, external, or ISO audits. • Archiving & Handover: Support final project documentation handover and proper archiving according to company and client standards. • Confidentiality: Maintain strict confidentiality and security of sensitive project information. • Experience in Document Control, particularly with Microsoft SharePoint; knowledge of Procore and ACC is a strong plus.

主任 1.監督施工過程，確認符合安全衛生計畫與相關標準。 2.提供施工現況訊息及施工規劃資訊，並確認內容符合施工需求。 3.依循施工預算辦理各項施工作業，監督施工廠商，依據施工計畫及合約規範，推動各項施工工作。 *有施工安全評估人員相關證照優先錄用 *有科技廠房廠房建廠電機經驗 尤佳 *工作地點視求職者條件，可能配置到桃園、竹科。